Used injection molding machines with a clamping force of 250 - 999 kN for sale (227)

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. Kledpfsx U Ax Ejx Ag Uel

Condition: used, Year of construction: 2010, Hydraulic injection moulding machine Kraus Maffei KM 350-3000CX in good condition. Ca 79000 working hours. Availability: 04/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 350T Screw diameter: 70 mm Tie bar spacing (H): 710 mm Tie bar spacing (V): 710 mm Pressure on material: 1855 bar Shot weight: 1464 g Ksdjyarn Espfx Ag Uoll Platen length: 1060 mm Platen width: 1095 mm Opening of the press: 920 mm Machine weight: 15500 kg Machine dimensions (LxWxH): 6790 x 2000 x 2250 mm

Condition: good (used), Year of construction: 1996, operating hours: 24,222 h, Description Type: BOY 80M Year of manufacture: 1996 Operating hours: 24,222 hours Screw (high wear resistance): 42 mm Kledpfx Aex Swn Njg Uol Max. injection pressure: 1,532 bar Max. shot volume: 200 cm3 Clamping force: 80 t Max. distance between tie bars: 410 mm Min. mould height: 250 mm Max. distance between plates: 725 mm Dimensions: 1,000 x 3,395 x 1,995 mm (L x W x H) Weight: 3,250 kg Options • Core pull • Including Procan control system • High wear-resistant 42 mm screw and cylinder • Colour contact (potential-free max. 5A) • Signal control for colouring

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding Klsdpfxsx D Ea Ie Ag Usl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,400 bar, warehouse no.: 503653 manufacturer: ENGEL type: e-max 200-50 controller: year of construction: 2011 clamping force: 500 kN distance between tie-bars h x v: 370 x 320 mm size of mould plates h x v: 520 x 470 mm min. mould height: 150 mm max. mould height: 350 mm max. open daylight: 610 mm opening stroke: 260 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2400 bar equipment included screen text german CEE-socket 16A air valve 1x machine without material hopper machine without hopper loader Anti vibration mounts interface robot EUROMAP 67 Schuko-socket 10A Kljdpfxox R Sm Do Ag Uol measures of machine l x w x h: 3.7m x 1.32m x 1.8m total weight: 3400KG

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A Kledpfx Agjx Rx Eao Ujl selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: excellent (used), Year of construction: 2012, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Drehteller Hersteller: KRAUSS MAFFEI Typ: KM110-180-55 CX V Baujahr: 2012 Klsdpfeyat S Sjx Ag Uel Schließkraft: 120 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 22 mm Schnecken DN 2: 18 mm Steuerung: MC 5 Ausstattung: Drehteller Antrieb elektrisch 2 x Kernzüge Bewegliche Platte 1 x Kernzug Feste Platte

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Kledpfsx U Dnuex Ag Usl Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2022, clamping force: 65 kN, displacement volume: 154 cm³, injection pressure: 2,429 bar, overall weight: 3,900 kg, load hours: 463 h, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz Ksdpfx Agsyaciys Usll delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ksdsx D I Uuopfx Ag Uoll Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, load hours: 4,500 h, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Kodpfxowi Uzhe Ag Uell terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2010, operating hours: 78,394 h, functionality: fully functional, machine/vehicle number: 213142, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine: Klodpfx Ajx Rvcvsg Usl Of course, we also purchase well-kept injection moulding machines from the current year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h Screw and barrel replaced Machine number: 213142 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve - German language - Single owner - machine sourced from Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2500 bar Electrical: Pump: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading/Shipping: Free loaded onto buyer's truck or free delivery by arrangement with freight costs reimbursed. Available ex stock Hannover, Germany.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: We also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and barrel replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator chute - German language - Single ownership – origin Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit: - Clamping force: 400 kN / 40 t - Tie bar spacing: 270 x 270 mm - Platen size: 446 x 446 mm - Opening stroke: 350 mm - Minimum mould height: 200 mm - Maximum daylight between platens: 550 mm - Ejector stroke: 125 mm - Ejector force: max. 30 kN Injection unit: - Screw diameter: 18 mm - Injection volume: 23 cm³ - Shot weight: 21 g - Injection pressure: 2,500 bar Electrical: - Pump: 11 kW - Heaters: 4 zones, 4 kW - Installed power: 15 kW - Main fuse: 50A Weight: 2,150 kg Guarantee: Warranty until initial commissioning Klodox Rvciepfx Ag Uel Loading/Shipping: Free loaded onto buyer’s truck or delivered to site against transport cost reimbursement Available ex stock Hanover, Germany Further information about our machines and company: - We only sell machines bought for our own stock from ongoing production, directly from our warehouse in Hanover - All machines offered are checked and tested before removal - We do NOT sell insolvency assets – we are NOT intermediaries dealing in third-party property - All machines offered come from successful companies where regular maintenance is a given - All listed machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, Dr. Boy 55 A DUROPLAST (only 7,278 h) Year of manufacture: 2016 Operating hours: 7,278 hours Kjdpoybqn Tjfx Ag Ujll Screw: 32 mm Duroplast Injection pressure: 2,127 bar Shot volume: 96 cm³ Clamping force: 55 t Tie bar spacing: 360 x 335 mm Min. mould installation height: 250 mm Max. platen opening: 650 mm Dimensions: 3,200 x 1,200 x 2,000 mm Weight: 2,430 kg Connection: 11 kW DUROPLAST granulate injection unit, single core pull control, air blast device, prepped for 4-circuit tool heating, etc.

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Kjdpfx Agoybp Hho Usll Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2022, Manufacturer: Krauss-Maffei Kjdpfeyapyfox Ag Usll Year of manufacture: 2022 Power-on hours: 604 Operating hours: 463 h Machine number: 61035748 Type / Model: KM 65-380 CX Clamping force: 65 t Minimum mould installation height: 250 mm Opening stroke: 750 mm Max. distance between mounting plates: mm Clear tie bar spacing: 420 x 420 mm Mounting platen dimensions: 670 x 670 mm Screw diameter: 35 mm Max. dosing volume: 154 cm³ Shot weight (PS): 140 g Hold pressure: kN Connection: 32 kW Accessories/Equipment: 1 core pull, 1 air valve Condition: Very good Weight: 3.9 t Dimensions: 4,000 x 1,500 x 2,000 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 192480, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale is an Arburg Allrounder 370 C 600-100 injection moulding machine. The machine is in well-maintained, fully functional condition. Optional accessories are negotiable. Klsdpex Uth Defx Ag Uol

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 190958, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale: Arburg Allrounder 370C 600-100 injection moulding machine. The machine is in a well-maintained, fully functional condition. Optional accessories are negotiable. Kljdpfx Agsx Utggj Ujl

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Kedpfx Ageu Ti Sro Usll Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: used, Year of construction: 2005, Technical details: Klsdpowftr Dsfx Ag Uel screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: good (used), Year of construction: 2007, operating hours: 47,792 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm centering diameter of fixed platen: 125 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar Klsdpfx Ajx Ic Dujg Uol equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, warehouse no.: 503615 manufacturer: ARBURG type: Allrounder 375 V 500-170 controller: Selogica-direkt year of construction: 2013 operation hours: 36163 h clamping force: 500 kN min. mould height: 200 mm max. mould height: 550 mm max. open daylight: 302 mm opening stroke: 225 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2500 bar Ksdpex Ic Dhofx Ag Ujll equipment included: screen text german rotary table Anti vibration mounts measures of machine l x w x h: 2.524m x 1.48m x 3.53m total weight: 3111KG

Condition: good (used), Year of construction: 2004, operating hours: 83,909 h, functionality: fully functional, clamping force: 700 kN, screw diameter: 25 mm, displacement volume: 69 cm³, injection pressure: 2,090 bar, warehouse no.: 503474 Kledpfxex Iczae Ag Uel manufacturer: ENGEL type: VICTORY 200-70 Tech controller: CC100 year of construction: 2004 operation hours: 83909 h clamping force: 700 kN size of mould plates h x v: 670 x 600 mm min. mould height: 144 mm max. open daylight: 594 mm opening stroke: 450 mm screw diameter: 25 mm swept volume: 69 ccm injection pressure: 2090 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 1x air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4m x 1.45m x 2m total weight: 5200KG

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h Kodpfx Agex Icy Ne Usll clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC 100 year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included: screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 Kodpjx Icp Rofx Ag Uoll handling weight: 2 kg screen-text: deutsch total weight: 250 kg measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG