Used Injection for sale (1,813)

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Cjdpfjzx Agnox Ac Tshb Defective control system!!!

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Weight approximately 9000 kg. Chodpfx Acszqabme Tob

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Cedpfjzxg Amex Ac Tshb Year of manufacture: 2005. Includes documentation. The machine is powered on for inspection.

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Csdpfx Ajzx D Hcoc Tshb

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45069, overall weight: 32,000 kg, For sale is a used machine from a site closure. Chedpfx Acjzrd U Hs Tjb Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Chsdpfxozrd Tpe Ac Tob The machine has not been inspected but was operational until the end.

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Csdpfx Aszx D Hpec Tehb Screw: 45mm Core pulls: 1x Hot runner system: 6x Without conveyor belt

Condition: excellent (used), Year of construction: 2015, Negri Bossi VH15000H-8400 Csdpfx Acezt Nbbo Tshb

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, clamping force: 2,750 kN, screw diameter: 70 mm, injection pressure: 1,441 bar, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Codpfx Acszrdhyo Tshb The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Chjdpfx Aszrd Aqec Tsb Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. A used machine from a site closure is being sold. Csdpfxezqagio Ac Tohb Sale excludes all warranty claims for defects. The machine has not been inspected but was operational until the end.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Chedpjygk Eiofx Ac Teb

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. Cjdpfxewm Iz Nj Ac Tehb ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR Csdpfx Aozkam Ajc Tjhb STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Chjdpfx Acjwhk Ius Tob

Condition: excellent (used), functionality: fully functional, Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar distance h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum mold height: 375 mm Maximum mold height: 600 mm Maximum platen distance: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Cjdozyn Tpjpfx Ac Tehb Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Injection volume: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 rpm Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500 KG Equipment • Screen text, German • Screen text, English • CEE socket, 32A • Hydraulic core pull, 2x • Hydraulic core pull unit • Air valve, 1x • Machine with water manifold • Machine without material hopper • Machine without material conveying system • Needle-valve nozzle, pneumatically actuated • Leveling elements • Interface EUROMAP 63 • Interface EUROMAP 67 Handling • Interface for ejector plate locking • Schuko socket, 10A

Condition: not inspected (used), Year of construction: 2000, operating hours: 104,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. Codpfx Acszrdl So Tjhb A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Csdpfx Acezmrf Ns Tohb The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Cedszqam Aepfx Ac Tjhb The machine has not been inspected but was operational until the very end.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. The Cartesian robot and other components of the cell can be purchased separately. Chedszw Hnyopfx Ac Teb

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Csdpfezrd Ugsx Ac Tehb Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. Chsdpjzrd Slefx Ac Tsb The machine has not been inspected but was in working order until the end.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Chedpfx Aozx D Efoc Tob

Condition: used, Year of construction: 1996, functionality: unexamined, ARBURG 221 M 250-55 injection molding machine. Clamping force: 250 kN. Year of manufacture: 1996. Complete with its two control cabinets (without display screen). It is sold in its current condition and is available for immediate removal, unless it is sold in the meantime. Cjdoztgpcjpfx Ac Tjhb You are welcome to visit and inspect the machine at our warehouse. We are open from 9:00 AM to 4:30 PM every day from Monday to Friday. Address: 11/14 Avenue Marcelin Berthelot, 92390 Villeneuve-la-Garenne, France. Price: €1000, loaded onto your truck. Please feel free to call if you require further information.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Chedpfx Aezl S Rpoc Tsb The machine has not been inspected but was in working order until the end.