Clamping force 0 - 249 kN for sale
Identified location: Ashburn (US) (Edit)
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 90 to
Dyfaydl
-Microcontrol control: MC 3
-Opening path: 610 mm
-Plate size: 525/570 mm
-Machine weight: 4.4 to
Injection moulding machine
Manufacturer Boy
Type 12M
year of construction 1998
clamping force 129KN
installation height 100-300mm
Opening stroke 200mm
Brs0wmam
tie bar dimension 259mm
max. injection weight 9gr
incl. documentation
Machine is in a used good condition.
Injection Unit
Screw diameter 34 mm
Stroke volume 111 cm^3
Injection pressure 206 bar
Clamping Unit
Clamping force 80 kN
Opening stroke 310 mm
This HAITAIN HTF80XA injection moulding machine was manufactured in China in 2007. The machine has a clamping force 80 kN and an opening stroke of 310 mm. It has an injection pressure of 206 bar and a screw diameter of 34 mm.
Bqesrancon
Application Types
Injection Moulding
screw diameter: 28 mm
injection shot weight in Polysterol: g/PS
closing pressure: kN
lockforce: 22 t
moulding weight: 40 g/PS
daylight between columns: 258 mm
cylinder head volume max.: 49 ccm
injection pressure: 930 bar
tank: 125 l
total power requirement: 8,5 kW
weight of the machine ca.: 0,7 t
space requirements of the machine approx.: L:2,3xB:0,75xH:3,4 m
Injection molding machines with protective grid
Processing of materials:
thermoplastics, elastomers, PVC, processing of rubber and/or the...
Plastic Injection Moulding Machine
Krauss Maffei 40 Ton Year 2005
MAKE / MODEL : KM 40- 55
YEAR OF MANUFACTURE : 2005
Clamping Fore: 40 t
EuroMap : KM 40- 55
Screw Dia: 15 mm
Shot Weight: 15
DBTB: 321 X 321 mm
General Data
Measurements width 3200 mm
Measurements depth 1300 mm
Measurements height 1800 mm
Machine weight 2500 Kg.
CONDITION: GOOD
Total Working Hours : 73,863
Price: 6950 (Loaded to transport)
Video in production is available on Whatsapp Only
This machine is in full working order...
warehouse no.: 502757
manufacturer: Wittmann Battenfeld
Typ: MicroPower 15-7,5
Controller Unit: UNILOG B6
year of construction: 2012
operating hours: 8000 h
clamping force: 150 kN
size of mould plates h: 240 mm
size of mould plates v: 248 mm
min. mould height: 100 mm
max. mould height: 300 mm
max. open daylight: 400 mm
opening stroke: 100 mm
size of round table: 466 mm
screw diameter: 14 mm
swept volume: 3 ccm
injection pressure: 2500 bar
Dxtx33
A high-resolution camera for quality control,...
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 50 to
37zbvoln
-Opening path: 375 mm
-Plate size: 375/430 mm
-Machine weight: 3 to
a Battenfeld TM1000/525 for sale!
Machine is still in operation. And runs every day 10-11 hours.
Expected sale in approx.
9-10 weeks.
Against arrangement possibly also earlier.
Defects: Proportional valve (dosing / injection) hangs from time to time. By a light hammer blow - to eliminate.
Bumh0y9y
This valve would have to be replaced if necessary.
Machine runs like clockwork !!!
No major failure since commissioning in 1999 !
Screw diameter: 40 mm
The small screen works, the computer screen was m...
General Data
Measurements width 4900 mm
Measurements depth 1750 mm
Measurements height 2100 mm
Machine weight 6800 kg
Clamping Unit
Clamping force 130
Rh8qad9b
This Krauss Maffei 130-1000 CX DUR Injection Moulding Machine was built in the year 2017. It has 3000 working hours. This machine can work with a injection pressure of 2304 bar and a clamping force of 130 kN.
Application Types
Injection Moulding
babyplast 6/10 P (S&P 3606)
I9ygqff
force tons: 6
shot ccm: 6,5
year: 2014
price: 17.500€
contact: Herr Ralf Schulz
Plastic Injection Moulding Machine
Krauss Maffei 40 Ton Year 2005
MAKE / MODEL : KM 40- 55- C2
YEAR OF MANUFACTURE : 2005
Clamping Fore: 400 kn
Oyemz
EuroMap : KM 40- 55- C2
Screw Dia: 20 mm
Shot Weight: 26
DBTB: 321 X 321 mm
General Data
Measurements width 3200 mm
Measurements depth 1300 mm
Measurements height 1800 mm
Machine weight 2500 Kg.
CONDITION: GOOD
Total Working Hours : 73,757
Price: 6950 (Loaded to transport)
Video in production is available on Whatsapp Only
This machine is in fu...
BATTENFELD BA 250/50 CDC machine as new!operating hours: 8,909year of construction: 1993injection unit:screw diameter: 18 mminjection weight: 20.4 ginjection pressure: 2224 barmetering volume: 22.4 ccmclosing unit:clamping force: 25 to.Clear width between columns: 270x270 mmMold platen size: 440x440 mmEjector: hydraulicClamping unit: hydraulicControl: UNILOG 4000 B2Additional equipment:EuromapRobot interfaceCore pull x1Air valve x7Manipulator BattenfeldMemory card from the mold programIt is poss...
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
Msifww
-Closing force: 60 to
-Screw diameter: 50 mm
-Control: Unilog 4000
-Spar distance: 320x320 mm
-Core pull
-Data collection terminal
Babyplast
year2003
B9usufn
Spray unit for 2K
closing power 25 tons
H88rqurp
for spare parts
Negri Bossi 55T injection moulding machine
Operating ours: 3.921 !!!
Clamping fore: 55T
Clamping type: Toggle
Swept volume, max: 120 cm3
Mould height, min/max: 120 / 350mm
Opening stroke, max: 255mm
Maximum day-light: 605mm
Tie-bar clearance, H x V: 315 x 280mm
Mould fixing plates, H x V: 465 x 430mm
Ejection stroke: 74mm
Location ring, FS / MS: Ø125 / Ø125mm
Core pull: 2
Air valve: 1
Mould tempering: yes
Coloring: yes
Radius sprue bushing: R40
Brrax2cdws
Ejection rod thread: M12
Plastic Injection Moulding Machine
Krauss Maffei 80 Ton Year 2000
MAKE / MODEL : KM 80- 160- C1
YEAR OF MANUFACTURE : 2000
Clamping Fore: 80 TON
EuroMap : KM 80- 160- C1
Screw Dia: 30 mm
Shot Weight: 68 Grams
DBTB: 470 X 470 mm
CONDITION: GOOD
Total Working Hours : 97,250
Video in production is available on Whatsapp Only
Price 6,950.00 ( Loaded to Transport )
Bryhw0kh7s
BATTENFELD Microsystem 50 / Electric machine / Operating hours: 1.587
Year of manufacture: 2001
injection unit:
Screw diameter: 14 mm
Injection weight: approx. 1 g
Injection pressure: 2500 bar
Dosing volume: 1.1 ccm
clamping unit :
clamping force: 5t
size of clamping platens: 196x364 mm
ejector: electric
clamping unit: toggle lever
Control: UNILOG B4
Additional equipment:
Electric machine
Low number of operating hours: 1.587 - Training machine
Production process takes place in a clean room envir...
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
Hivbtnp9o
-Closing force: 60 to
-Unilog control: 4000
-Spar distance: 490x490 mm
-Core pull
-Data collection terminal
-Weight: 4 to
Boy 22 MVV vertical injection molding machine
Year of production 2005
Screw diameter 32 mm
Clamping force 220 kN
Working hours 61177
5 more BOY 22 MVV injection molding machines for sale
2004 - 28 mm screw
Pvd7o3
2004 - 24 mm auger
2004 - 28 mm snail
2005 - 32 mm auger
Boy 15s
Oxcrb
Boy 22A ( Nr. 111)
Ability to work horizontally and vertically
Year of production: 2005
TECHNICAL DATA
Screw Dia [mm]: 22
Shot Weight [g]: 28,45
Injection Pressure [bar]: 1732
Clamping Force [kN]: 220
Tie Bar Distance [mm]: 254
Bq3mby32jv
Platen Size [mm]: 220 x 400
Mould Height min. [mm]: 200
CONTROL
Type of Controls: Procan CT
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
Power [kW]: 9,05
Workinghours [h]: 13154
Weight [kg]: 880
Plastic Injection Moulding Machine
Eg0khkv8o
Clamping force 204 T
Screw diameter 55 mm
Tie bar spacing (H) 470 mm
Tie bar spacing (V) 470 mm
Shot volume 427 cm³
Shot weight 360 g
Pressure on material 1600 bar
Platen length 715 mm
Platen width 715 mm
Opening of the press 650 mm
Mould size 250 mm min
-----
Length x width x height 5300.0 × 1700.0 × 2000.0
Weight 4500 kg
Video in production is available on Whatsapp Only
Price 5,999.00 ( Loaded to Transport )
Beautiful Dr. Boy 2C XS DEMO second component injection unit.
The 2K unit can temporarily turn any injection molding machine into a 2K machine. Compatibility on: ENGEL, ARBURG, KM, DEMAG, etc.
Basic information:
Working hours: 50
Control panel: Procan ALPHA 4
WARRANTY: 12 MONTHS
Kyuzqvwo
Technical information:
Screw diameter: 16 mm
Max. injection force: 1549 Bar
Max. dosing volume: 8 cm³
Max. shot volume (PS): 7,3 Gr.
Extra options:
* Open nozzle with inside thread and R35 insert incl. heater...
Injection molding machine
-Closing force: 25 to
-Screw diameter: 22 mm
-Control Unilog 2040
-Spar distance: 250x250 mm
Qkwlqfhyl
-Data collection terminal
-Parts removal device make ASS
-Temperature control device make Single
Working hours: 85284
Lenght: 3,3m
Width: 1,10m
Cylinder: D25
Injection capacity : 69m3
Clamping force: 40t
Opening stroke: 350mm
Minimal mould hight: 150mm
Daylight: 500mm
Ejector stroke: 100mm
Platen size standard: 550 x 430
Screw and cylinder with corrosion resistance D25
1x air valve
Compressed air regulator
Water flow manifold 4 krogi –
Ejector coupling
1x 1F socket
1x 3F socket
Or39h
Visual and acoustic alarm
Not much use.
Photo with the characteristics
Bi7rsspsxz
Manufacturer: Battenfeld
Type of machine: BA 250 - 050 CDC
Year: 1996
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Ome37
Controlversion: Unilog 4000
Screen text: Dutch
Operating Hours 86.000 Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 250 kN
Size of mould platens (h x v): 440 mm. x 440 mm.
Distance between tie bars (h x v): 270 mm x 270 mm
Mould opening stroke: 325 mm
Mould height min.: 125 mm
Mould height max.: mm
M...
Plastic Injection Moulding Machine
Krauss Maffei 110 Ton Year 2004
KM 110 220/55 CZ Multijet
Year 2004
Twin shot machine
Brwai9pyv3
Double core pull
25mm and 15mm screw diameters
53gr and 14.5gr shot weights
42.96kW motor
345 litres of grade 46 oil
Min mould height is 400 (280)
Max mould height is 1000 (880)
Tie bar spacing 530 x 470mm
Ejector stroke 150mm
Price : 11,999
Video in production is available on Whatsapp Only
Price £11,999.00 ( Loaded to Transport )
Injection moulding machine Arburg 221 K 250-75 FY 2001
Nvvsp
The machine has only 3000 operating hours!
screw Diameter 30 mm
min. daylight 200 mm
Esa9cmvx3
incl. convejor belt
incl. climatic
3 Monate Teilegarantie Generalueberholt
Boy 22 S Dip
Plastifiziereinheit 24
offene Duese R35
Auswerfer 80 mm Hub
Wasserverteiler 4 fach
Düsenverschlusszylinder
Ölstand + Temperatur Überwachung
Dekompression
Ausschrauben eine Drehrichtung mit Zwischenstopp
Ausblasvorrichtung
H2kacs2
Lichte Weite zw. den Holmen: 254 mm
Schließkraft 220 KN
4 Maschinenfüße
2 Cekon Steckdosen 16 A
380V / 50 Hz
" Bilder zum Vergleich"
Volume d'injection : 15 cm3
Diamètre de la vis : 25 mm
Volume d'injection : 30 cm3
Pression d'injection : 1000 bars
Course d'injection : 36 mm
Force du vérin d'injection : 4900 dN
K9icj7it
Longueur de la vis : 360 mm
Puissance de chauffe : 3,35 kw
Nombre de zones de chauffe régulées : 3
Pression hydraulique maximum : 160 bars
Contenance de la trémie : 10 litres
Manufacturer: Battenfeld
Type of machine: BA 200 / 50 CD Plus
Year: 1990
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Unilog 4000
Screen text: German / Englisch
Operating Hours 16.865 Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 200 kN
Size of mould platens (h x v): 400 mm x 400 mm
Distance between tie bars (h x v): 254 mm x 254 mm
Mould opening stroke: 325 mm
Mould height min.: 125 mm
Mould height max....
Plastic Injection Moulding Machine
Krauss Maffei 110 Ton Year 2010
MAKE / MODEL : CX 110-750
YEAR OF MANUFACTURE : 2010
Clamping Fore: 1100 KN
EuroMap : KM 300-1900-C2
8s2pple
Screw Dia: 50 mm
Shot Weight: 357 Grams
DBTB: 470 X 470 mm
Max Open Daylight : 900 mm
Platen Size: 745 x 770 mm
Mould Height : 350 mm
Minimum Mould Height : 200 mm
Opening Stroke: 600 mm
Ejector Stroke : 150 mm
Total Working Hours : 37,897
Video in production is available on Whatsapp Only
Price ...
6 monht waranty on parts
Used, remanufactured Boy 22 M VV Procan Control
Plastification unit 18 mm, open nozzle R 1/2"
Decompression
Coolant manifold 4 times
Material hopper
Hydraulic ejector 80 mm with stroke limitation
Clear width between tie bars: 254 mm x 254 mm
4 Leveling pads
N9fwvxfp
Closing force 220 KN
400V 50 Hz
"phots as example"
Manufacturer: Battenfeld
Type of machine: BA 150 / 050 Plus
Year: 1991
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Unilog 4000
Screen text: Dutch
Operating Hours Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 150 kN
Size of mould platens (h x v): 330 mm x 300 mm
Distance between tie bars (h x v): 185 x 155 mm
Mould opening stroke: 220 mm
Mould height min.: 184 mm
Mould height max.: mm
Max daylight: 40...
6 Monate Teilegarantie Generalueberholt
Boy 22 M Procan Control
Plastifiziereinheit 18 mm
offene Duese
Auswerfer 80 mm mit Hubbegrenzung
Wasserverteiler 4 fach
Dekompression
Lichte weite zw.d.Holmen 254mm x 254mm
220 KN
Bfxhk03tzi
400v 50 Hz
" Bilder zum Vergleich"
Manufacturer: Battenfeld
Type of machine: BA 230 / 50 CD
Year: 1992
Delivery time: Immediately
Bkxhgetmeu
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Unilog 2040
Screen text: -----
Operating Hours 54.022 Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 230 kN
Size of mould platens (h x v): 440 mm x 250 mm
Distance between tie bars (h x v): 254 mm
Mould opening stroke: 325 mm
Mould height min.: 125 mm
Mould height max.: mm
Max dayli...
6 month parts warranty Remanufactured
Boy 22 D
Plastification unit 24 mm
open nozzle R 35 Duese
Ejector 80 mm
Waterdistributor 4-fold
220 KN
Be38otzx9x
400v 50 Hz
" photos for example"
Manufacturer: Engel
Type of machine: ES 80 / 20 HL S
Year: 1994
Delivery time: immediately
Terms of Delivery: EX Works
Location: B - 4340 Awans
Controlversion: EC 88-S
Screen text: Dutch
Operating hours: hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 200 kN
Size of mould platens (h x v): 470 mm x 380 mm
Distance between tie bars (h x v): HL
Mould opening stroke: 330 mm
Mould height min.: 150 mm
Max daylight: 480 mm
Hydraulic ejector - stroke: 70 mm
Eject...
6 Monate Teilegarantie Generalueberholt
Boy 25 M Procan Control
Plastifiziereinheit 24 HV
offene Duese
Auswerfer 80 mm
Wasserverteiler 4 fach
Dekompression
Lichte weite zw.d.Holmen 254mm x 254mm
250 KN
400v 50 Hz
" Bilder zum Vergleich"
72vu97sxa
6 Monate Teilegarantie Generalueberholt
Boy 22 S Dip
Plastifiziereinheit 28
offene Duese
Auswerfer 80 mm
Wasserverteiler 4 fach
220 KN
Ydp8utolb
400v 50 Hz
" Bilder zum Vergleich"
Aus laufende Produktion / Medizintechnik
3 Monate Teilegarantie
Funktionsgarantie
Boy 22 S Dip
Plastifiziereinheit 24 mm
Nadelverschlussduese R 35
Wasserverteiler 4 fach
Ausblasvorrichtung
Mcdvj
Ausschraubvorrichtung 1 Drehrichtung mit Zwischenstop
Materialtrichter
Lichte Weite zw d Holmen 254mm
Schliesskraft 220 KN
400v 50 Hz
" Bilder zum Vergleich"
6 Monate Teilegarantie Generalueberholt
Hykukkr
Boy 22 S VV Dip
plastifiziereinheit 24
offene Duese
Auswerfer 80 mm
Wasserverteiler 4 fach
220 KN
400v 50 Hz
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
Photo gallery: The World's 10 biggest excavators
Sell now on Machineseeker! Over 220,000 inquiries per month
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Injection moulding machinery
Dealer for Injection moulding machinery
