Used Injection Molding Machine Vertical for sale (66,976)

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Nsdezrngyepfx Akijlh Injection volume: 292 ccm Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mold mounting plates: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is basically functional but requires repair or maintenance. Further information on the condition can be provided upon request. Sale Inspection possible by appointment Sale from our location Please contact us for further information, images or to arrange an inspection.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Nledpfs Aa Ad Tox Akish Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, mold height (min.): 190 mm, ejector force: 20,100 N, ejector stroke: 105 mm, total height: 3,554 mm, overall weight: 6,700 kg, Clamping force: 60t Year of manufacture: 2010 Injection unit 200 Screw diameter: 30 mm Specific injection pressure: 1451 bar Injection volume: 99 cm³ Pump motor power: 15 kW Tool closing unit 600 Clamping force: 60 t Tool plate dimensions: 1200 mm (rotary table) Ejector force: 20.1 kN Ejector stroke: 105 mm Tool height: 190 mm Opening stroke: 335 mm Weight: 6700 kg Control system: CC200 Vertical injection molding machine with rotary table Njdpez Hmc Hofx Akijlh Equipment: - Vertical design with rotary table, 2 mold positions - Rotary table Ø 1200 mm - Moving platen 990 x 575 mm, M16 threaded grid - Screw Ø 30 mm - Injection flow rate 149 cm³/s, boosted pressure 2205 bar - Screw speed up to 480 rpm - Nozzle stroke 530 mm, nozzle clamping force 28.3 kN - Nozzle opening Ø 3 mm, nozzle length 50 mm - Min. mold height 190 mm - Max. machine height 3554 mm Typical applications: overmolding of connectors, contacts, cable ends, sensors, and threaded and metal inserts.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Nedj Adrrzjpfx Akielh Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Nodpfxe Afaqbo Akijlh Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Nodpfx Akoywx Hqeiolh Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Nodpfx Aoz Ipqvjkielh Price: On request

Condition: used, Year of construction: 2000, Clamping unit 22 ton Max / Min Plate space 400 / 200 mm Screw: 22 mm Injection pressure 1732 bar Nsdpsz Sl H Rofx Akislh Injection volume 30 ccm Shot weight: 27 g/PS Weight: 950 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037303, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,564 bar, injection weight: 432 g, mold height (min.): 500 mm, ejector force: 3,300 N, ejector stroke: 175 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 6,100 mm, total width: 1,710 mm, total height: 1,950 mm, overall weight: 8,400 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 520 mm, tool weight: 14,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile machines in stock: The fully electric PX series is the answer to your demands for greater flexibility combined with increasing productivity. Robust mechanics, highly precise and dynamic drive technologies, and intelligent energy management make the PX a reliable, productive, and efficient workhorse in any injection molding operation. An ergonomically optimized working height, maximum clearance under the mold, and excellent accessibility ensure maximum operator convenience. The PX series stands out due to its flexibility throughout its entire service life. TECHNICAL DATA: KM 160 / 750 PX G02 (Order 38621981) CONTROL  MC6 with 21.5" TFT color touchscreen and multi-touch function CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 240  Mold opening (h x v) mm 520 x 470  Platen size (h x v) mm 710 x 660  Mold height min. - max. mm 200 – 500  Opening stroke mm 850  Max. mold opening stroke mm 450  Ejector drive Hydraulic  Ejector stroke mm 175  Ejector force forward/backward kN 33 / 16  Ejector speed forward/backward mm/s 350 / 350  Max. mold weight kg 1400 INJECTION UNIT  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.3  Injection pressure bar 1564  Injection volume cm³ 475  Shot weight at max. stroke for PS g 432  Injection speed mm/s 125  Injection flow rate cm³/s 297  Screw drive / speed 1/min 267  Plasticizing rate (standard screw)4) g/s 75.8  Nozzle clamping force kN 42 ELECTRICAL PARAMETERS  Connected load kW 42  Installed heating power kW 18  Power supply V / Hz 415 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 8.4  Length x width x height m 6.1 x 1.71 x 1.95 ADDITIONAL EQUIPMENT  Increased mold opening  Hydraulic core pull 1+1 - way  Pneumatic core pull 1+1 - way  Air valves 1+1 - way  Pneumatic cascade 4 - way  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available for immediate delivery. Additional options can be offered upon request. Nsdpfxs Afdato Akielh We look forward to your inquiry.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours, in near-new condition. Nlodpfx Ajwb Dl Tskijh The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in near-new condition. It is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but, as part of the site relocation, has now been released for sale. The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000, including the crane. Please note: Items 10.0064 to 10.0070 (eFlomo) are not included in the scope of supply! This was not implemented. Everything else as per the order confirmation is fully installed in the machine. I can provide you with the technical data upon request. Included in the price: dismantling the crane and packing it onto two Europallets. Also, removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located at the Nypro facility near Karlsruhe and can be inspected there. Delivery is possible within a few days. Below, in the documents, you will find the order confirmation from ENGEL to Nypro!

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Nsdpfjzg T I Sox Akijlh Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 141-100, clamping force: 3,700 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,175 cm³, injection pressure: 1,400 bar, injection weight: 1,060 g, mold height (min.): 300 mm, opening stroke: 710 mm, plate width: 1,070 mm, plate height: 990 mm, total length: 8,135 mm, total width: 1,890 mm, total height: 2,275 mm, overall weight: 16,000 kg, pump power: 107,000 W, Fully electric Negri Bossi injection moulding machine. Was operational in production until the end. Nlodpfx Aeyxpd Askish

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. Nedpfx Akoza D Idjielh The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Inspections are possible and expressly encouraged, by prior arrangement.

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Cooling unit 1: Frigel RCM80/6HP Year of manufacture, cooling unit 1: 2012 Njdpfx Asz Alpgekielh Voltage, cooling unit 1: 400 V Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Available from APRIL 2027

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Nledpfez Ef N Aox Akieh Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Calculated displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Nlsdpfx Akszpwrgsieh Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Disassembly and collection must be carried out by the buyer. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Nodpfexqhuuox Akielh Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Nlodpfx Akszw H Dbjieh Included: External control panel for access requests and emergency chain reset.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Nlodpfx Aksyrczgeish Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Nlodpfxsz Iqdqo Akijh Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) Nledpfxoz Ip Tde Akijh The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: good (used), Year of construction: 1999, clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection molding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Machine weight: 12,500 kg CE marking: present 2 units available WITHOUT LINEAR ROBOT! Further information available upon request. Nsdpfxjytnnze Akislh

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, OLEOPRESS OP/Z 40 hydraulic press. INJECTION MOLDING PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approximately 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approximately 2,800 kg Nlodpfezpbc Aox Akish

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. Nedpfx Aezrvhlekijlh In excellent condition! Price for both machines: only €14,000.

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. +F00 SN 158.719A Nlsdpfx Ast Dyl Sokieh