Used Plastic Injection for sale (6,814)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection Kdedszza Egopfx Akpsu The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Kodpfx Aozna T Rekpodu

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Kjdpfszqglrox Akpedu Good condition

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Kdsdpjx Nhy Refx Akpju

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition Kdsdpfx Akezx Etwspsu

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit Kdodpfeytgmvox Akpju - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Kjdpfxjzylxis Akpjdu Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Kdodpfx Aez Szncskpsu Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface EUROMAP 13 interface Kedpez A A Hyjfx Akpodu EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Schuko socket 10A Mold heating, 8x

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Equipment 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated Kodpfxjz A Dmze Akpsdu EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: QN.127018, Used plastic injection molding machine Manufacturer: SYNERGI - NETSTAL Maschinen AG Type: SYN 2400-900 Kdsdpfo Aazlisx Akpou Year of manufacture: 2002 Machine No.: 127018 Equipped with Wittmann W633-643 handling system.

Condition: used, Year of construction: 2013, Application: PET preform injection molding Machine type: High-performance, two-stage PET preform injection molding system Clamping force: 2250 kN Injection configuration: P100/110 injection unit with E100 extruder Maximum PET shot weight: 3,344 g / 7.4 lb Minimum PET shot weight: 372 g Injection unit stroke: 340 mm E100 extruder PET transfer capacity: 3,613 g Tie bar spacing: 660 x 660 mm Clamping stroke: 755 / 920 mm Ksdpfo Abarkjx Akpedu Shut height range: 585 / 750 mm Daylight: 1,505 mm Ejector stroke: 200 mm Approximate clamping unit weight: 7,802 kg Approximate total injection unit weight without oil: 13,150 kg Compatible mold configurations listed by HUSKY: 6, 8, 12, 16, 24, 32 and 48 cavities Maximum listed cavity configuration: 48 cavities Typical preform applications include PET bottles and other high-volume packaging products Designed for high productivity, repeatable molding performance, and integrated preform production cells.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Kodpfx Akjywx Hqepjdu Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2011,

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Kdjdjz Tiwhepfx Akpsu Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: used, Year of construction: 2005, operating hours: 61,407 h, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from Arburg, model 470 C 1600-800. The pump and one circuit board have been removed from the machine; therefore, the machine is being sold as defective. Otherwise, it is in very good condition. Technical specifications: Pump operating hours: 61,400 Clamping force: 1600 kN Distance between tie bars: 470 x 470 Ejection stroke: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335 x 1635 x 1950 mm Weight: 6950 kg The machine is offered without any peripherals. Kdsdpfx Akjz Etu Hspsu Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling WE BUY / SELL PRODUCTION & METALWORKING MACHINES, AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-1900 C2 Stock No.: 503535 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Ksdpfxjz Dgcbe Akpedu Platen size h x v: 1270 x 1200 mm Minimum mold height: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 cc Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s PS Free injection rate: 700 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment Screen text in German Hydraulic core pull, 4x Machine without handling system Machine without material hopper Leveling elements Tool heating, 12x

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Ksdpfx Akozypcfspodu Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Kdodpozcx Tmsfx Akpsu

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, plate length: 1,690 mm, plate height: 1,960 mm, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, BATTENFELD HM 10000-9200 Stock No.: 503007 Manufacturer: Wittmann Battenfeld Type: HM 10000-9200 Control System: UNILOG B4 Year of Manufacture: 2003 Operating Hours: 67092 h Technical Data, Clamping Unit Clamping Force: 10000 kN Tie Bar Spacing, horizontal x vertical: 1120 x 1400 mm Platen Size, horizontal x vertical: 1960 x 1690 mm Minimum Mold Height: 550 mm Maximum Mold Height: 1020 mm Maximum Mold Opening: 2120 mm Opening Stroke: 1100 mm Ejector Stroke: 300 mm Ejector Force: 118 kN Centering of Moving Platen, diameter: 250 mm Centering of Fixed Platen, diameter: 315 mm Kdjdpfx Aez Dgdxskpsu Technical Data, Injection Unit Screw Diameter: 120 mm Displacement: 5655 ccm Injection Pressure: 1632 bar Screw Length: 22 l/d Screw Stroke: 500 mm Screw Speed: 130 rpm Screw Torque: 11370 N Plasticizing Rate: 144 g/s PS Free Injection Rate: 1144 g/s PS Number of Heating Zones: 8 Nozzle Distance: 700 mm Dimensions & Weight Machine Dimensions LxWxH: 11.6m x 2.9m x 2.5m Total Weight: 76500 KG Equipment Screen text in German Compact-Flash drive Hydraulic core pull, 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Extended oil cooler Tool heating, 16x

Condition: as good as new (ex-display), Year of construction: 2026, SHIBAURA EC 450 SXIII-26AT ELECTRIC INJECTION MOLDING MACHINE Year of manufacture: 2026 Manufacturer: SHIBAURA MACHINE CO., LTD. – Japan Model: EC 450 SXIII-26AT Machine type: Fully electric injection molding machine Clamping force: 450 tons (4500 kN) Location: Wrocław, Poland Availability: Machine available for immediate delivery, viewing possible at the PIMM showroom CLAMPING UNIT Clamping force: 450 tons (4500 kN) Column spacing (H × V): 870 × 810 mm Platen dimensions (H × V): 1230 × 1160 mm Mold opening stroke: 800 mm Maximum daylight between platens: 1800 mm Minimum mold height: 350 mm Maximum mold height: 1000 mm Ejector force: 127 kN Ejector stroke: 180 mm i26 INJECTION UNIT Screw diameter: 70 mm Injection volume: 1340 cm³ Injection weight (PS): 1230 g Injection weight (PE): 980 g Injection pressure: 190 MPa (1900 bar) Injection speed: 160 mm/s Injection rate: 615 cm³/s Plasticizing rate (PS): 260 kg/h Screw torque: 2580 Nm Nozzle closing force: 44.1 kN MACHINE WEIGHT AND DIMENSIONS Machine weight: 22,500 kg Kdsdpfx Asz Rldxjkpsu Machine length: 8100 mm Machine width: 2200 mm Machine height: 2300 mm COMMERCIAL DESCRIPTION We offer a fully electric SHIBAURA EC 450 SXIII-26AT injection molding machine, manufactured by the renowned Japanese manufacturer SHIBAURA MACHINE. The machine utilizes advanced electric drive technology, ensuring high precision, repeatability of the injection process, and the ability to reduce energy consumption compared to traditional hydraulic solutions. The injection molding machine is available in our showroom in Wrocław, where you can view it and learn about its technical capabilities. We also offer comprehensive support for transportation, installation, commissioning, and operator training. Machine available for immediate delivery. We invite you to contact us and arrange a viewing.

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine 80 tons Year 2002 Kdjdpjz Dquzjfx Akpsu

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Ksdpjz Ipm Refx Akpodu Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Injection rate into free air: 700 g/s Number of heating zones: 6 Ksdpszypawefx Akpjdu Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Kdsdpfszd U Disx Akpou