Used edge sanders & profile sanders for sale (174)

Condition: used, Year of construction: 1988, used, good condition cleaned, tested Fpodpfevwf Trjx Adajb manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units Fsdpfx Adjwf U Awjaepb UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Design: 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Fedpswimduofx Adaspb Max. cutting length 3100 mm Functionally tested

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VOLPATO LVO 120 Edge Sander Specification: • Condition - used, serviced • Manufacturer - VOLPATO • Model - LVO 120 • Working height - 120 mm • Sanding belt dimensions 150 x 2580 mm • Additional drum for sanding internal curves • One worktable adjustable at any angle from 0-90 degrees • Motor power - 2.2 kW • Mechanical belt tensioning and oscillation • Attachment and protractor for angle sanding • Extraction port - 100 mm diameter • Weight - 250 kg Fsdpfx Ajxxbf Nodaopb • Year of manufacture - 2000 • Documentation in Italian • Overall dimensions 180 x 100 x 125 cm (L x W x H)

Condition: excellent (used), Samco Unilev 15 Edge Sander Fpsdpfxsxd Rl No Adasb Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: new, Year of construction: 2025, with hinged veneer edge grinding device, for the adjustment of the chip removal oscillating sanding belt Aggregate swivels up to 45 motor power: 2,2kW belt size: 3000 x 200mm table size: 930x350mm Fpedpspl Ugajfx Adasb weight: ca.360kg roller: 120mm Central connection for suction 140mm Included: - Miter fence - undercarriage - Grinding shoe rotatable - can be used from 3 sides - contact roller 65mm - exchangeable - extendable table extension - feed console - CEE socket for feed unit

Condition: used, Used, good condition Brand Wegoma Fsdpjwkvxwefx Adaepb Type KS2250 GS wood dust tested Motor 2.25 kW Oscillation Front table approx. 620 mm x 220 mm Unit tiltable 0-90° Belt length 2250 mm x 150 mm Belt width 150 mm Belt speed 20 m/sec. Miter stop Round edge sanding device Extraction connection D 120 mm Space required approx. 1250 mm x 800 mm x 1200 mm Weight approx. 100 kg Storage location 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Fpedew A Aa Ejpfx Adaeb Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure

Condition: good (used), Year of construction: 1985, Edge grinder for solid wood with star for curves Fjdpsir Ukuofx Adaspb with osscilation

Condition: ready for operation (used), Year of construction: 2005, I sell the brushing machine Prochera DSB. Year 2005. 2-side spindle fi.30 x max. 220mm. Fjdpfxjvyllmj Adajpb Motor 1,1 kW. Brush included. Weight 90 kg. Available immediately.

Condition: used, Year of construction: 2018, functionality: fully functional, overall weight: 1,750 kg, power: 13 kW (17.68 HP), The grinder is in perfect condition, fully functional, and has been used very little. Ready for immediate pickup. Fedpjxl Hw Dofx Adaepb

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Engine power: 2,2 kW Abrasive belt oscillation pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Additional table on pulley Fodpfxedq H D So Adaepb

Condition: used, Model making machines Including over 100 canvas belts Including approx. 30 15 mm belts, approx. 30 30 mm belts, approx. 10 40 mm belts Including 11 profile sanding rods Used, excellent condition, little used Make: Zimmermann Type: PS 1 Belt length: 2700 mm - 2710 mm Extraction connection diameter: 80 mm Space required: approx. 1000 mm x 600 mm x 1800 mm Weight: approx. 400 kg Storage location: 97447 Gerolzhofen, free on freight, unpackaged Fodpfswhqxasx Adaepb Sold in the current condition, as seen, without warranty or guarantee

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Fpjdpfxsg Rn Ias Adaob Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate Fpedpfx Aoi A Ivysdasb WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Condition: good (used), Year of construction: 2002, functionality: fully functional, Grinding and brushing line for straight, conical and bent parts. Stacker, grinds from 4 sides. feed speed regulation, speed regulation of grinding units. Fpodpfxovv E H As Adasb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 1,800 mm, total width: 1,000 mm, total height: 1,250 mm, type of input current: three-phase, grinding belt length: 2,580 mm, grinding belt width: 150 mm, extraction connection diameter: 100 mm, VOLPATO LVO 120 Edge Sander Specification: • Condition – used, after inspection/service • Manufacturer – VOLPATO Fpedpfx Asxuvgyedaob • Model – LVO 120 • Working height – 120 mm • Sanding belt dimensions – 150 x 2580 mm • Additional shaft, roller for sanding internal radii • One worktable adjustable at any angle from 0 to 90 degrees • Motor power – 2.2 kW • Mechanical belt tensioning and oscillation • Angle grinding attachment, angle gauge included • Extraction port – diameter 100 mm • Weight – 250 kg • Year of manufacture – 2010 • Machine documentation in Italian • Overall dimensions: 180 x 100 x 125 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The photos shown reflect the actual item being sold • Possibility to connect and test the machine on site

Condition: ready for operation (used), Working table length 144 cm, working table width 71 cm, operating pressure 6 bar, working table tilting 30 degrees, sanding belt width 15 cm Fpsdpfxowx H A Ae Adaob

Condition: used, Year of construction: 1991, with 2 double-head linear grinding machines used, good condition Make: Reckmann Type GL 162 Year of manufacture 06/1991 Machine no. 1622 Workpiece width 10-100 mm Workpiece thickness 10-106 mm Number of units 2 x 2 Vibro longitudinal grinding units 2 double-head, tiltable 130 ° Pressure rollers from above Pressure from the side Digital display Feed speed 0-25 m/min. continuously variable Space requirement approx. 2500 mm x 1300 mm x 1300 mm Weight approx. 850 kg Fedpfx Adsvwgihsaspb Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: excellent (used), Sanding belt width: 200 mm Fpjdpfx Adjxnyz Usajb Variable belt speed control Dimensions of fixed worktable: 1000x400 mm Dimensions of tilting worktable: 1000x350 mm Mechanical oscillation Power supply: 380 V Motor speed: 1450 rpm Motor power: 3 kW Weight: 550 kg Year: 2007

Condition: excellent (used), Volpato LS-1NR edge grinder with chamfers Working height 10-100mm Aggregate system: 1.5kw grinding unit 1.5kw upper chamfering unit Fsdewhx Hxspfx Adaepb 1.5kw lower chamfering unit Mechanical grinding belt oscillation Chafer speed regulated by means of an inverter up to 9900r.p.m Feed speed regulated by means of a variator 5-30m/min Grinding unit at various angles 2450x80mm grinding belt length

Condition: excellent (used), Year of construction: 1993, Edge sanding machine Fedpfxer Nbktj Adaepb Arminius SP31 In very good condition.

Condition: excellent (used), Volpato LASM Edge Sander Fjdpfx Adswcflqjaspb Mechanical oscillation Constant grinding speed 1.5k3 motor Grinding height approx. 100mm Belt length 2640mm Height 130mm Extraction nozzle fi 100mm

Condition: excellent (used), Comec chair component cross grinder 5.5kw main motor Grinding belt width 100mm Extraction nozzle 110mm Dimensions of the machine 233x60x140cm Fpodpjrrdv Tofx Adaob

Condition: excellent (used), Volpato LBK 150 edge grinder Grinding belt height 150mm Length of the grinding belt 2650mmm Oscillation of the grinding belt mechanical Raising/lowering the unit from the control panel Main motor 3kw Oscillation motor 0.37kw Fpjdpfjvdpyvjx Adaob CE certificate Extraction nozzle 110mm