Used Auto Edger for sale (35,052)

Condition: new, The new Pilous double edger DB700Automatik is characterized by the best functionality and long service life due to the solid construction. 3 powered feed rollers made of steel below, 2 revolving pressure rollers with rubber coating above, with control panel 2 return rollers on the machine for easy work processes. 4 rows of anti-kickback technology, multiple emergency stop switches. Developed, built and quality-tested in Europe! Technical datas: Band width 700 mm Cutting height max. 75 mm Cutting height min. 10 mm Side fence 1000 mm Table length 500 mm Minimum cutting width 15 mm Maximum cutting width 520 mm Width adjustment automatic Minimum board length 800 mm Saw blade diameter 2 x 350 mm Kerf 3,2 mm Motor 11 kW Gbolovrvgrjhccqtog Feed speed variable 4 to 18 m/min Optional equipment: Engine power 15 kW, recommended for more than 2 saw blades 2 laser (1 x fix, 1 x adjustable) Table length 2000 mm upper pressure roller made of steel additional saw blade holder (1 pc.) on a fixed unit additional saw blade holder (1 pc.) on moving unit

Condition: used, Year of construction: 1994, Automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum throughput width: 1000 mm Gslswdux Aehccqtobg Maximum cutting height: 120 mm 2-rail variable Combi measurement with S-conveyor with cross-cut saw with Esterer ARS TR infeed with 2-blade chip separator New saw shaft, new bearings, and new chains 3 years ago. Has already been dismantled and is ready for loading at any time. Location: Austria, near Leoben

Condition: good (used), Edger line / automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of construction: 1994 Maximum passage width: 1000 mm Maximum cutting height: 120 mm Golovg Ecfjhccqtobg 2-stile variable Measurement Combimes with S-conveyor with cross-cut saw with Esterer ARS TR infeed with 2-lamellar splinter separator new saw shaft, new bearings and new chains 3 years ago. Incl: External infeed for boards to DK90 with tilt destacking with cross conveyor

Condition: used, A total of 3 sets of soft, pre-turned top jaws are being offered. The price listed above applies to one set of chuck jaws. ----- Gbelhccqjk Un Sijtjg Jaw interface: Serration 1.5 x 60° Chuck types: Kitagawa; Howa; B210; BB210; other Asian manufacturers Chuck size: 10" approx. ø 250 mm For example: HOWA 10", Auto Strong 10" Slot N = 16 mm Width B = 40 mm ----- Picture no. = Item no. Pos.1) 8035_10_09 → €25.00 per set Pos.2) 8035_10_10 → €25.00 per set Pos.3) 8035_10_11 → €25.00 per set ----- # Order - Shipping costs / per set €9.00 ----- Jaw dimensions: Width: 40 mm Height: 40 mm Length: 110 mm Hole spacing: La = 17+22 mm For fastening screws DIN 912 = M12 T-slot => N = 16 mm ----- T-nuts or other types of chuck jaws available on request.

Condition: good (used), Morgana Auto Creaser PRO 50 Automatic Creaser The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The MORGANA AUTOCREASER 50 PRO is one of the world’s most popular automatic creasers, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, micro-perforation, and fragmentary perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 500 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Gjlhccqsx N I Izjtsbg Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 500 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in one pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Perforating disc: 1 pc. standard Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1,500 x 682 x 1,224 mm Net weight: 156 kg Power supply: 230V, 50 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, DS-Place – the compact all-in-one pick-and-place solution The DS-Place is a ready-to-use complete solution for automated parts handling. It combines robot, camera, PLC, conveyor system, and material hopper in one compact system – without lengthy integration. Gbelhow Rm Hwjccqteg ✅ Fast & precise: Up to 1,200 parts per hour are reliably detected, picked, and transferred to the next station. ✅ Flexible: Handles a wide variety of plastic or metal parts – gently and consistently. ✅ Simple: Set up, connect, and start – no separate interface programming or complex coordination required. ✅ Industrial-grade: Built with proven components from leading manufacturers (Epson, Keyence, Siemens, Item, Vetter). With DS-Place you save time, reduce error sources, and increase process reliability. Ideal for companies that want to automate quickly without setting up a complex project. 👉 Contact us now for more information or a non-binding offer. Keywords: Pick-and-Place – Sorting system – Robot cell – Feeding – Conveying – Parts handling – Automation – Robot handling – Sorting – Positioning – Handling.

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Pitch circle diameter 171,4 Gbjlhceln Uixecqtog Chuck height including flange 135 mm Weight 53 kg

Condition: used, Castors, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, leveling roller foot -Manufacturer: Auto CFT Carrymaster, leveling roller 1 set / 4 pieces -Type: AC-1000 -Load capacity: 540 kg -Roll: Ø 72 x 31 mm -Adjustment range: 120 - 139 mm -Number: 2 sets of leveling rollers available Gbolhceu Sv Uyocqtsg -Price: per set -Single dimension: 140/103/H120 mm -Weight 1.6 kg/piece

Condition: new, O.D. Ø 305 mm I.D. Ø 90 mm Gjlofhdnhshccqtebg

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. Gbjlhortn Nzoccqtjg The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit.

Condition: excellent (used), mileage: 179,040 km, power: 100 kW (135.96 HP), first registration: 02/2017, fuel type: diesel, tire size: 195/65R16, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: diesel, color: white, gearing type: automatic, number of gears: 7, emission class: euro6, number of seats: 3, total length: 5,370 mm, total width: 1,930 mm, total height: 1,910 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, electric window regulation, full service history, navigation system, sliding door, traction control, General information Number of doors: 4 Cab: single Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Tyre size: 195/65R16 Brakes: disc brakes Suspension: coil spring suspension Front axle: Max. axle load: 1490 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Max. axle load: 1490 kg; Tyre profile left: 50%; Tyre profile right: 50% Performance Acceleration (0-100 kph): 12,8 s Top speed: 184 km/h Weights Empty weight: 2.147 kg Carrying capacity: 653 kg GVW: 2.800 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Interior Interior: black Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Number of keys: 2 Gslhovz Uy Aeccqtjbg Additional information Please contact Moussa or Youssef for more information Video working vehicle: Mercedes Vito 114 CDI L3 XL Year of construction 2017 Automatic Navi Camera 179,040 KM demonstrable

Condition: used, axle configuration: 2 axles, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 780 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, color: grey, Equipment: ABS, = Additional options and equipment = - Toolbox = Notes = New trailer, available immediately. Not yet registered. Equipped with: Gelhccqjwbzi Njtebg ROR axles with drum brakes. Air suspension with lift and lower valve. 4 x LED work lights. 2 x LED flashers on the rear frame. 4 sockets for width marker boards. Edge profile with holes, 30 mm diameter every 1000 mm. 2 x 10 stanchion sockets in the side beam. Mounting bracket for winch. Rear storage compartment for ramps, Maximum ramp size: 2400 x 470 x 150 mm Stainless steel box: 1000 x 350 x 500 mm. Hardwood floor. = Further information = Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tires; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Unladen weight: 6,600 kg Payload: 20,600 kg Gross vehicle weight: 27,200 kg Type number: OPRIJ / LOWBED / AUTO / CARA = Company information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide accurate information, but no rights may be derived from the texts provided.

Condition: used, mileage: 770,000 km, power: 368 kW (500.34 HP), first registration: 03/2018, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 30 m³, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN TGX 26.500 First registration: km Automatic transmission Retarder Gboloxzxypjhccqteg Wheelbase 4500 mm Body: Heiting Year 2001 Compressor type: CS1050, year 2012 30 cubic meters Next tank inspection Tel: We are happy to assist you with financing or leasing EU sales: net price with company documents and VAT number VAT deposit €2,000 we speak English govorimo srpsko-hrvatski Our service for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Airport transfer (Munich) or train station (Passau) Tel:

Condition: used, mileage: 770,000 km, power: 368 kW (500.34 HP), first registration: 03/2018, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 30 m³, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN TGX 26.500 First registration: km Automatic transmission Retarder Wheelbase: 4500 mm Body: Heiting Year of construction: 2001 Compressor: GHH CS 1050 (year: 2012) 30 cubic meters Next tank inspection Tel: We are happy to assist you with financing or leasing Gelhjxzm Uzeccqtsbg EU sale: net price upon presentation of company documents and VAT number VAT deposit: €2,000 We speak English Govorimo srpsko-hrvatski Our service for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich airport or Passau train station Tel:

Condition: used, Year of construction: 1997, Manufacturer: Bausch + Ströbel Bausch + Ströbel Model: ESA 1025 Type : Self-adhesive labeller for cartridges, ampoules and vials Year : 1997 Machine number 50414   Container Ø 8 mm to 25 mm Container height from 20 mm to 140 mm Label length from 26 mm to 85 mm Label height from 13 mm to 45 mm Maximum capacity: 25,000 labelled cartridges per hour Current format: Diameter 8.8 mm x Height 68 mm Cartridge Spare parts included Mechanical overhaul in 2020 Goljx R Dg Nshccqtobg Printer and camera control NOT included User manual in French Floor area (L x W x H) 150 x 220 x 190 cm Weight: 850 kg

Condition: used, This listing is for the Protosheet Engineering 5L Auto Fumigation pot Gbslhcoxhgb Iocqteg Stainless Steel The unit is in full working condition and is ready for immediate use

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. Gboljhhzl Hshccqtsg * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, incl. ramp recess with ramps / closed loading platform with numerous lashing points / manual cable winch Technical Data: • Brand: Martz • Model: GT PLATEAU 400 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Unregistered • TÜV/HU (inspection): 2 years from first registration • Interior dimensions (LxWxH): 405 x 199 x 0 cm • Exterior dimensions (LxWxH): 555 x 203 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 565 kg • Payload: 2,135 kg • Chassis: Flatbed trailer (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber suspension axles • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Anti-slip, waterproof phenolic plywood floor • incl. manual cable winch with brake • Ramp storage compartment under the loading platform • 2x steel loading ramps • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • 8x lashing rings recessed in the side frame (600daN/kg) • Side panels can be retrofitted at any time • Automatic reverse mechanism • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin connector • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Tail lights recessed in the rear frame • Automatic jockey wheel mounted Retrofittable accessories – feel free to enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel Gslhccqjx S Rm Eetobg • Toolbox • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance, or export license plates (Germany) can be provided - Export plates incl. customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available on site! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: like new (used), functionality: fully functional, mileage: 69,921 km, first registration: 04/2014, fuel type: diesel, maximum load weight: 3,005 kg, overall weight: 3,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, number of seats: 4, total length: 7,400 mm, total width: 2,300 mm, total height: 2,900 mm, Year of construction: 2014, Equipment: AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, cable winch, car registration, central locking, compressor, cooling unit, cruise control, differential lock, electric window regulation, electronic stability program (ESP), had accident, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power mirror, retarder, seat heater, sliding door, tachograph, tail-lift, trailer coupling, The original Swiss motorhome is in perfect condition with ONLY 69,921 km! 04.2014 Mechanically and visually in very good condition. The motorhome is 7.40 m long, 2.90 m high and 2.30 m wide. Serviced and passed technical inspection (MFK) on 29.09.2023 Equipment: - Air conditioning (Cabin) - Automatic transmission - Tempered glass - Satellite antenna with TV - Reversing camera Gbelhccex Tf Ndjqteg - Bicycle rack - Semi-leather seats - Air suspension - Navigation - Vehicle battery and additional battery replaced in June 2025.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher PLC auto is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB PLC auto compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Gbeljc Spguehccqtjg Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Year of construction: 2020, condition: good (used), Cryovac BL14 Semi Auto bag loader Golhoxru Ukoccqtsbg 2020, Stainless, semi automatic bag loader, 1Ph

Condition: used, This listing is for a Sakura Tissue-Tek Auto Write Cassette Printer Golhexzgx Hjccqtjbg

Condition: used, Year of construction: 2008, - Brand: Ruthmann - Type: TB 220 - Year of construction: 2008 - Hours: 2548 - Mileage: 126,430 - Weight: 3340 kg. - Working height: 22 meters - Lateral reach: 14 meters - Dutch license plate - 29-VTR-5 - Export license plate possible Golox Nazyshccqtebg - Safety inspection valid until Aerial work platform book available - CE document available - Machine is very neat - From second owner - Video on our website - Trade-in and transport possible * Brand: Ruthmann *Type: TB 220 * Construction year: 2008 * Hours: 2548 * Km. position: 126.430 * Weight: 3340 kg. * Working height: 22 meters * Lateral reach: 14 meters

Condition: used, mileage: 129,000 km, power: 78 kW (106.05 HP), first registration: 02/2012, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro4, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sale price: €5,880 Iveco Daily First registration: 02/2012 Mileage: 129,000 km TÜV (vehicle inspection): valid until 02/2026 If you have questions: VAT can be itemized. At least 50 units in stock ---- Please do not send emails / email inquiries can only be answered intermittently due to time constraints! Thank you for your understanding. ---- Business hours and further information: Viewing and purchase possible without appointment: MO - THU: 9:00 AM to 4:00 PM FRI: 9:00 AM to 1:00 PM SAT: 9:00 AM to 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen Germany If you have questions: Contact: Christian Hirsch Please try calling repeatedly as we are often in customer meetings. ---- Full service history / regularly serviced: yes Emission standard: EURO 4 Environmental badge: green Previous owners: 1 VAT can be itemized: yes Emission standard: Euro 4 = Green environmental badge - With / without air suspension in stock - Rear-view LED camera - Interior lighting with motion sensor - Load compartment length: 4.35 m - Load compartment width: 2.05 m - Load compartment height: 2.07 m Foldable passenger seat Interior features: Cup holders, Power steering Exterior features: Sliding door, Electric and heated side mirrors, Central locking incl. remote control, Electric windows - front Technology: Outside temperature display On-board computer Safety & Environment: Driver airbag, electric Immobilizer ABS ESP Traction control Particulate filter For questions: Christian Hirsch Please try calling repeatedly as we are often in customer meetings. Further offers available at / Further offers available at / Gjlhcsw H H Eyocqtebg Equipment determined via VIN lookup; technical errors possible Business hours and further information: Viewing and purchase possible without appointment: MO - THU: 9:00 AM to 4:00 PM FRI: 9:00 AM to 1:00 PM SAT: 9:00 AM to 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen Germany ---- Information provided online is non-binding. They do not represent guaranteed characteristics. The seller is not liable for errors in typing, transmission, or changes/inaccuracies. Subject to errors and prior sale.

Condition: good (used), mileage: 188,964 km, power: 132 kW (179.47 HP), first registration: 12/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, fuel tank capacity: 75 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, USB port, air conditioning, central locking, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Further options and equipment = - Armrest - Exterior mirrors with indicator lights - Automatically dimming interior rearview mirror - AUX input - Becker holder - Passenger bench seat - Tachometer - Third brake light - Driver airbag - Height-adjustable driver’s seat - Remote central locking - Windshield - Tinted glass - Height-adjustable steering wheel - Height adjustment for front seats - Foldable exterior mirrors - Air conditioning - Rear headrests - LED lighting - Center armrest - Particulate filter - Radio/CD player - Disc brakes - Headlight leveling - Immobilizer - USB port - Bulkhead with window = Remarks = Very well-maintained VW Crafter 2.0 TDI 180 HP tractor unit, automatic transmission, first registered on 03.12.2018, 3 seats, Belgian registration, permissible total weight 7,000 kg, air conditioning, electric windows, 2 keys, service booklet. For further photos or more information, please contact us by email at or by phone at . You can find our complete offer at = Further information = General information Number of doors: 2 Cab type: single Technical information Number of cylinders: 4 Engine displacement: 1,968 cc Front axle: steering Weights Unladen weight: 2,245 kg Payload: 4,755 kg Gross vehicle weight: 7,000 kg Gbslhccsx Hqp Noqtjg Functional Superstructure brand: DSG Condition Technical condition: good Visual condition: good Damages: none Financial information Price: On request VAT/margin scheme: VAT deductible = Company information = Nidro cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price.' For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content.)