Used Edging Machine for sale (65,419)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h Gijlhcjyzxa Eedwxet EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Gjlhcdwowq Hp Tjxeit Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Gioljwq Hqkehcdwxot Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 Gislhou R Sy Ajcdwxet - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gielhceywlfyodwxjt Yorick Diebels

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg Giolhcdoy Rt Aajwxst

Condition: excellent (used), Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V Gelhcdwoy Sap Aexoit - Supply voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Incl. sanding belts: 12 pcs grit 120; 4 pcs grit 80; 10 pcs grit 150

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm Gelhsb A Nmdscdwxjit -Motor mounted on guides -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Giolew Tfw Hshcdwxst Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Gislhcey Iu N Aedwxst Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Golhcdwew S Dmdoxoit Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 2019, machine/vehicle number: MR002728, Used: edge banding machine for applying edge band and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for longitudinal and cross edges. Machine features include pre-milling unit, end trimming operations, and an additional glue pot. The machine comes with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for glue tank - Spare glue tank Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue tank capacity: 0.8 kg - Pre-milling unit present: Yes Golhcoy I Rf Hedwxoit - Pre-milling tool diameter: 80 mm - Pre-milling tool height: 56 mm - End trimming unit: HM saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes - Serial number: KK00006654

Condition: new, Deburring machine Make: Assfalg Golsb E Dc Hehcdwxeit Model: FS 5 Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating instructions

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches Gisljbhfzbehcdwxst - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: Gjlodurxnjhcdwxsit -Special flap disc K80-ST -Suction nozzle -Manual

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: - Complete sanding unit motorized tiltable up to 45 degrees without any table adjustment - Feed system integrated into the machine body, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 kW - Continuously variable speed control 3-15 m/min - Double-sided operation with surface and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW - Oscillation stroke programmable 10-90 mm - CE-compliant/dust tested Gislhcdwey R Ha Ejxet - With chassis Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Golhewkba Tocdwxoit Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm Gislhcdjwka S Ijwxjt - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 Gelhcdowka H Sewxsit - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: Gijlhcswkbcbedwxst - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Gielsy Hrh Tohcdwxst Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: Gislju R S Nwshcdwxst - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with a rolling block chain (instead of standard chain), extended mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Golewvlhljhcdwxeit Comprises: Edgebanding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / infeed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Gslhsxy Tm Iscdwxeit

Condition: used, Storage location: Sonnefeld Gislhcdweway Dcexot