Used Tooth Edges for sale (4,529)

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm Lhjdpfx Abezk Nmrjysn - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: MACC2020027, We are offering this Montresor Lola 6.4, manufactured in 2020. This machine is in very good condition and is fully operational. The robot shown in the images is not included with the machine. Specifications: Lhedpfxszvvxxj Abyjn * 6 grinding heads * 4 edge breakers * 1 milling unit * 1 sawing unit for automatic water seals * continuous feed with automatic conveyor belt Condition: The machine has always been well-maintained and is in excellent working order. Ready for immediate use without any additional investment. Testing is possible by appointment. The machine is available immediately.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports Lhjdjz Rk E Ujpfx Abyon • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: used, total height: 2,200 mm, total length: 5,350 mm, total width: 1,200 mm, Year of manufacture: 2018 Colour: White Weight: 3.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - Serial number: 1000022855 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes Lhjdpfxszw El Rj Abyen - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 85 - Max. panel width [mm]: 3200 - Min. panel length [mm]: 140 - Max. panel length [mm]: 3200 - Min. feed speed [m/min]: 12 - Max. feed speed [m/min]: 18 - Feed speed control: Variable - Left or right-sided: Yes - Max. spindle speed [rpm]: 12000 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 11.0 - Transport dimensions: 5350mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Year of manufacture: 2013 Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot Lhedeyrp Uaepfx Abyon - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 590, type of input current: three-phase, table length: 1,000 mm, overall weight: 480 kg, height adjustment type: hydraulic, input voltage: 400 V, grinding belt length: 3,200 mm, grinding belt width: 200 mm, input frequency: 50 Hz, The HOUFEK HB 1000 edge sanding machine, manufactured in the Czech Republic, is designed for sanding solid wood and wood-based materials. This machine is ideal for carpentry workshops, suitable for processing the edges of furniture components, moldings, fronts, and other wooden products. The table with adjustable inclination allows for sanding at an angle, and the additional workstation on the opposite side of the belt increases the machine's capabilities. TECHNICAL DATA: – Manufacturer: HOUFEK, – Model: HB 1000, – Country of manufacture: Czech Republic, – Year of manufacture: 2006, – Serial number: 590, – Power: 3 kW, – Power supply: 400 V, three-phase, – Frequency: 50 Hz, – Rated current: 6.6 A, – Machine weight: 480 kg. CATALOGUE PARAMETERS OF THE MODEL: – Sanding belt width: 200 mm, Lhsdpfx Abjz S Ed Uoyon – Sanding belt length: 3200 mm, – Dimensions of the work table: 1000 × 400 mm, – Table inclination range: 0–45°. The above catalogue dimensions require confirmation by measurement for the offered unit. EQUIPMENT: – Work table with adjustable inclination, – Additional table on the opposite side of the belt, – Guide with adjustable angle and scale, – Manual adjustment knobs, – Guards for the sanding unit, – Connections for connecting a dust extraction system, – Emergency stop switch. We issue a VAT invoice. Transportation can be arranged for an additional fee. You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE

Year of construction: 2021, operating hours: 2,608 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 06421, COMANDULLI EDILPLUS 8+6 DX model Belt running direction: RIGHT to LEFT, year of manufacture 2021, #06421 • Annual maintenance last performed on 10/08/26 – only 2,608 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 upper chamfer supports (height-adjustable) • Belt infeed: Calibration/profile support, both axes motorized • Pneumatic finishing/stock support • Belt outfeed: Water nozzle support, both axes motorized • Automatic centralized lubrication system • Table extension console, double-row • Space requirement approx.: 630 x 180 cm, infeed and outfeed area: 300 x 60 cm Optional services available, such as: freight, installation and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories in the pictures are not included in the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty Ljdpfxsz Rk Hfs Abyohn • Machine sold as is, with no warranty of any kind Inspection possibility • at the operating site near Bitburg Availability • after delivery of the new machine, approximately February 2027

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013, for sale. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No series production was carried out. The reason for the sale is the closure of the business! Type: TORNADO-TOP Lhsdpfxezvqclo Abyen Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Mitre fence for table End table for bobbin / shaped sanding Lodpfxey H Itfo Abyshn 3kw sanding belt motor 0.4kw belt oscillation motor

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Lhjdpfszu T Sgsx Abyen Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, pressure: 6 bar, 6-disc glass grinding and polishing machine. In excellent working condition! 6 discs Ljdpfozzrrxex Abyehn Glass thickness: 3 - 35 mm Minimum glass size: 40x40 mm Speed: 0.5 - 5 m/min. Power: 16.5 kW Power supply: 400V The machine is in excellent technical condition and can be viewed, tested, and purchased by prior arrangement.

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Lodpszy Sfcsfx Abyohn Weight 850 kg

Year of construction: 2025, operating hours: 140 h, condition: like new (used), functionality: fully functional, machine/vehicle number: X-1500, Equipment: CE marking, Only 12 months old – like new , only 140 working hours. Immediate availability. Full documentation + CE. Can be demonstrated producing corners. Unique capability: up to 130×130 mm. Perfect condition – ready for production. Manufacturer: SIA Model: Edge Protector 130x130, Slitter 1500x1500, SCC Base 7 Year of Manufacture: 2025 Working Hours: 140 hours Technical Condition: Like new State: In production Edge Protector Specifications: - Size: Minimum 35x35mm, Maximum 130x130mm - Wall Thickness: Minimum 1.5mm, Maximum 8mm (10mm optional, depending on paper thickness) - Maximum Reels: 12 + 1 craft - Speed: 50m/min (60m/min optional, available on data regulation) - Glue heating - 7,5kw. Slitter Rewinder Specifications: - Reel Size: Maximum 1500x1500mm, Minimum Width 500mm - Minimum Cutting Width: 35mm - Number of Knives: 15 - Speed: Maximum 250m/min - Electrical Power: 11kW SCC Air Compressor Specifications: - Base: SCC Base 7 VSD TD - Electrical Power: 7.5kW - Air Volume: 0.92m³/min - Tank Volume: 500 liters Dimensions: EDGE PROTECTOR ; SLITTER : Length: 26000 mm; 3000MM Lsdpfx Abjz I S Idjyohn - Width: 3000 mm ; 2300MM - Height: 2500 mm ; 1300MM - Weight: 6000 kg ; 3500KG Keywords: corner production line, cardboard corner machine, edge protector machine, packaging corner line, cardboard profile machine, V profile machine, 130×130 mm corner, automatic corner cutting, high‑speed corner line, packaging machinery, cardboard converting machine, protective corner production, industrial packaging equipment.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Lhedps Ad Ezcefx Abyen TECHNICAL DETAILS Swing diameter: 225 mm Turning length: 1,000 mm Diameter over carriage: 1,000 mm Feed rate, continuously variable: 9–400 mm/min Feed rate, continuously variable: 4.5–200 mm/min Travel of steady rest: 360 mm Travel of upper steady rest: 220 mm Tailstock diameter: 60 mm Tailstock travel: 170 mm Tailstock adjustment: ± 20 mm Spindle speed: 225–2,000 min⁻¹ MACHINE DETAILS Manufacturer: Zimmermann Type: DZUE 1000 Year of manufacture: 1990 Machine length: 2,500 mm Machine width: 1,000 mm Machine height: 1,600 mm Machine weight: 1,000 kg

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Lsdpfoz Afctox Abyehn Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Lsdpfxjz I R Sns Abyjhn Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Year of construction: 2012, condition: used, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Lhsds Aba Rtjpfx Abyen

Condition: excellent (used), Year of construction: 1999, Double-sided multipurpose edge sanding machine with oscillation and 200mm sanding height Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection required Drive motor 400V / 3kW Front work table for sanding veneer edges with a grooved stop guide (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-loaded table, adjustable in height and can be positioned to the side Angle stop Rear adjustable work table for sanding solid wood Both tables are height-adjustable to utilize the sanding belt Belt dimensions 3000 x 200mm Side extension table for radius sanding on the 150mm belt roller Feed support holder 68mm Lsdpsz I T Apefx Abyshn Central dust extraction connection 140mm Very stable frame, 2 swivel casters, 2 steering casters, and a lever brake for locking CE marking All graphite pads and dust extraction hoses have been replaced Original paint, only touched up in a few places Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (LxWxH). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Ljdpfx Abezbyt Eeyshn Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, total height: 1,500 mm, total length: 5,500 mm, total width: 1,100 mm, Year of manufacture: 2022 Colour: White Weight: 1.650 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 1000054777 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - - Tools available: Yes Lhjdpfx Abozx Aghsyon - └ 4th unit type: Fine milling unit - └ 5th unit type: Corner rounding unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 5 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 50 - Min. panel length [mm]: 150 - Max. panel length [mm]: 3200 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 22 - Power [kW]: 11.9 - Transport dimensions: 5500mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Lsdpfxsz D Auts Abyehn Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested

Condition: excellent (used), Year of construction: 2022, With the RFM 320 model, BARTH offers a sanding machine that enables the quick and efficient creation of chamfers up to 16 mm wide in a single pass, while ensuring the highest sanding quality. Short setup times ensure that even individual pieces can be manufactured in a time-saving manner. The RFM 320 features a sanding belt oscillation system with pneumatic belt cleaning. Standard equipment for the RFM 320: Adjustable sanding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) Chamfer sanding device up to 16 mm wide Sanding belt oscillation with pneumatic belt cleaning Integrated base for feed unit 16A socket for feed Dust extraction port Ø 80 mm Chassis with 2 steerable, lockable wheels Workpiece support, 380 mm extended width Pre-milling unit 1,100 W / 220 V Continuously variable speed up to 25,000 rpm Milling range up to a radius of 12.5 mm CE Installation dimensions L x W x H in mm: 1,600 x 690 x 1,010 Weight: 207 kg Includes many NEW sanding belts Lhjdpfx Abez Uhgdsyon Note regarding used machines: • Subject to errors in technical specifications and prior sale. • The stated prices are ex-works prices, collection only – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Lsdpfxjz En Axj Abyehn Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm Lhodpfxezw N Eue Abysn - Tool: r = 2.5 or r = 3

Year of construction: 2016, operating hours: 9,580 h, condition: excellent (used), functionality: fully functional, Edge Polisher Comandulli Musa 7+4 DX Partially worked meters: 5578 m Total operating hours: 9580 h Working direction: from right to left - Advance/feed speed (conveyor belt): 0 to 3 m/min - Belt width: 600 mm - Working thickness: 10 to 80 mm - Min. working width: 80 mm - Max. working width (without bar): 1200 mm - Max. working width (with bar): 3000 mm - Loading plane height: 750 mm Aggregates: - Calibrating spindle with vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles, no. 7, with floating mechanism – oscillation Lhsdpfszipzgox Abyjn - Beveling spindles, no. 4. The first two beveling spindles (no. 1 upper and no. 1 lower) are inclined at 45° and equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously generated bevels. Automatic valves for water 2 roller tables, each 1.5 m long Color touch screen Rated output: 22 kW Dimensions (excluding rollers): 5.15 x 1.8 x 1.74 m Weight: 4000 kg