Condition: good (used), Year of construction: 2006, CNC Double Column Coordinate Boring and Milling Machine with independent NC Controlled Deep Hole Drilling Unit Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 2200 x 3240 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Fobeb Dy D Ssvm Uz Eogb Distance between the columns 2750 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition Proposal number V(B)-5234

Condition: good (used), Year of construction: 1990, Used radial drilling machine from MAS Fgebvm Uzswa A Dre Eob Type VO 80 Drilling capacity 80 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 0702-240017, Cross transfer tables as a chain drag system for the cross transport of sectional steel in steel construction and steel trade. These sturdy cross transfer tables were used on a Kaltenbach bandsaw line and are in very good condition. Fjbvmsr Rddws Uz Ejgb 5 pieces of overhauled cross drags as chain drag system with antitrailing bar for discharge side, incl. 1 x motor and 4 x shafts, length 3300 mm, height 600 mm,

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Fgjbvmjwhxqwe Uz Ejb Weight: approx 350 KG

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table Fgsbvm Ujpxmlqoz Esb - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: used, Year of construction: 2015, core drilling diameter max. 5-40 mm bore depth 1500/1800 mm Control Heidenhain ITNC 530 x-axis 2500 mm y-axis 1650 mm z-axis 1550 mm w-axis 2250 mm a-axis -30/ +30 Grad b-axis 360 ° Fgjbvmovkiuaj Uz Ejb table surface area 1800x1800 mm table load 15 t tool taper HSK 100 spindle turning speed - stepless 0-6000 U/min rapid traverse 20 m/min Feed speed 1-20 m/min. max. torque on the working spindle 952/648 Nm threading M30 Drive power - drilling and milling device 17/25 kW Power connection 102 kVA coolant 585 Liter high-pressure pump 30-90 bar tool changer 32 Plätze weight of the machine ca. 55 t dimensions of the machine ca. 9,85 x 9x5 m As good as new machine - spindle running time 3,204 h coolant system from 30 bar with 115 l/min to 90 bar with 30 l/min tool changer 32 x (4x8) max. tool diameter, all spaces occupaid 148mm max. tool length 400 mm max. tool weight 15 kg 3 pcs. steadyrests tool monitoring of the main spindle by torque digital drive control drill milling cycles and thread cutting without balancing chuck In addition, approximately 700 pieces of single-lip drills can be purchased almost all of them unused Manufacturer: Botec und Iscar diameter of borers: 5/8/10/12/13/13,1/14/15/16,2/16,5/17/18/18,1/16/22/24/27/ 30/33/ length of borers 600/1000/1500/1900

Condition: good (used), Year of construction: 1966, Control: Heidenhain TNC 360 (1992) Fgobvm Uzj Rbwij Eob Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 – 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 – 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 – 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !

Condition: used, Year of construction: 1988, Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Fgebvowgkyusm Uz Esb Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg

Condition: good (used), Year of construction: 2002, bore capacity in steel (diameter) 24 mm throat 260 mm bore stroke 120 mm spindle turning speed range 80 - 1400 U/min table-size 500 x 365 mm morse taper 3 total power requirement 1,5 kW weight of the machine ca. 250 Kg Fgobvmjwgi E As Uz Esb dimensions of the machine ca. HTB 1,85 x 0,8 x 0,5 m

Condition: used, Year of construction: 2001, drilling depth: 800 mm, total height: 2,700 mm, overall weight: 10,800 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle motor power: 15 W, drilling capacity: 25 mm, travel distance W-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840 D, space requirement length: 5,600 mm, space requirement width: 4,910 mm, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 800 mm .. Y-axis travel: 600 mm .. Z-axis travel: 800 mm .. W-axis travel: 1250 mm .. rotating range B-axis from: 0 ° .. rotating range B-axis up to: 360 ° WORKING RANGE -BORING- .. drilling depth (max): 800 mm .. drilling capacity full bore (steel): 25 mm SPINDLE / HEAD .. tool fixture: HSK A50 .. drive power: 15 kW AXIS DRIVES .. feed velocity (max): 15000 mm/min TOOL MAGAZINE .. number of positions: 20 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V Febvm Uewgcvhjz Eogb .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5600 mm .. space requirements -front/back-: 4910 mm .. total height: 2700 mm .. total weight approx.: 10800 kg 20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and various tool holders

Condition: used, Functionality: fully functional, Technical details: • Manufacturer: Gerhard Müller, Nuremberg • Model: AZMETALL • Machine type: Pillar drilling machine • Speed ranges: 300 / 500 / 850 / 1300 / 2250 rpm (continuously adjustable via belt drive) • Max. drilling diameter: approx. 25-30 mm (depending on the material) Fsbvmov Ex Rtj Uz Ejgb • Spindle mount: Morse taper (probably MK2 or MK3) • Drilling depth: approx. 120 mm • Table: Height adjustable and rotatable around the column • Drive: Electric motor with belt drive, 380 V (three-phase current) • Condition: Used, fully functional, ready for immediate use

Condition: ready for operation (used), Year of construction: 1975, Radial Drilling Machine Brand: CSEPEL Type: RF75/1750 Year: 1975 / Modernized in 2013 Specifications: Maximum drilling diameter: 75 mm (steel) Maximum thread: M60 Arm length: 1750 mm Vertical arm travel: 950 mm Arm rotation on the column: 0° to 180° Min./Max. distance: Between spindle and base: 370 / 1,700 mm Spindle stroke: 380 mm Morse taper No. 6 Spindle speeds: 19 – 1,900 rpm Spindle feeds (16 ranges): 0.047 - 2 mm/rev Useful base area: 1,100 x 2,050 mm Machine height: 3,450 mm Machine weight: 6,000 kg Equipped with: Programmable RADIAL 2-axis display (equidistant drilling on a diameter) Fgebvm Uzswhfhvj Eeb Heidenhain probe Reduction gear for arm rotation with angle encoder Cube: 1,000 x 800 x 600 mm

Condition: good (used), Year of construction: 1979, Functionality: fully functional, drilling capacity: 32 mm, overall weight: 1,870 kg, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Fobowgahbovm Uz Eogb Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: used, bore capacity in steel (diameter) 60 mm Fobowftt Isvm Uz Eegb throat 400 mm total power requirement 4,4 kW weight of the machine ca. 1,7 t

Condition: good (used), Year of construction: 2004, bore capacity in steel (diameter) 28 mm throat 300 mm bore stroke 150 mm distance spindle /table 60-765 mm distance spindle/base plate 1.200 mm taper MK 3 threading M20/M24 column diameter 115 mm table-size 510 X 425 mm spindle turning speed - stepless 60 - 1:400 U/min total power requirement 1,4 kW weight of the machine ca. 350 Kg. Fgobvewgi Evsm Uz Ejb dimensions of the machine ca. 1,9 x 0,6 x 0,9 m - Digital spindle speed display - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor

Condition: used, Year of construction: 2001, 1 SEER MAC TCO 32 pillar drill press with various accessories, 400 V, 50 Hz, see photos and inspection Color: gray Fsbvjwf Dx Iem Uz Eogb Year of manufacture: 2001 Machine number: 011735 Approx. weight in kg: 370 Condition: used

Condition: new, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm Fgjbvmoifkpws Uz Ejb distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 0,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 760 x 600 x 2000 mm Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment Fobvsvzhd Usm Uz Esgb - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 2 pieces Febvmowb A E Ej Uz Ejgb -Type: PTPk-6/5 / MK6/5 -Shipping/Price: complete -Transport dimensions: 127/64/H148 mm -Weight: 4.0 kg

Condition: good (used), Year of construction: 1984, A Heckler & Koch BA20 CNC-controlled automatic drilling machine from 1984 is for sale. Working range x-axis 650 mm, y-axis 350 mm and z-axis 200 mm Work table with two clamping surfaces each 750 x 420 mm, drive spindle speed range 50-6000 min-1, tool holder steep taper SK30 system HK, drive power DC motor 10.5 kW, torque approx. 40 Nm, tapping M16, feeds infinitely variable 10-8000 mm / min., inputs y and x axis 12 m / min., z axis 8 m / min, Capacity 2 x 12 tools, max. tool diameter 50 mm, max. tool length 320 mm, coolant system can be switched on and off automatically via program, delivery rate 75 l / min., operating voltage 3 x 380 V 50 Hz, control voltage 220V 50 Hz, total connected load 15 kW, fuse protection for the entire system 30A. Large tool kit and plenty of accessories. Machine can be tested under power in advance. Febvstzakwem Uz Ejgb Loading possible on collection via overhead crane.

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 350 mm bore stroke 180 mm no. of turning speeds 18 Stufen spindle turning speed range 50 - 1450 U/min feeds 0,1 - 0,2 mm/U spindle taper MT 4 table surface area 560 x 560 mm base plate 730 x 500 mm Distance spindle/table max. 500 mm column diameter 150 mm distance spindle/base plate 1100 mm Total height 2400 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t Febevcrm Nsvm Uz Eegb dimensions of the machine ca. 4,2 x 0,7 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted,

Condition: used, Year of construction: 2004, 1 x HEBÖ RBV 12 pipe drilling machine Febvmswf Duce Uz Esgb with various accessories, see pictures and inspection Color: blue/gray Year of manufacture: 2004 Condition: used

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling method used on the deep hole drilling machine is drilling with a single-lip drill. Drilling unit information: - Drilling depth: 200 mm - Min/max drilling diameter: 1-12 mm based on ST 60 - Number of spindles: 2 - Spindle spacing: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Continuously variable spindle speed: 1000-20000 rpm - Continuously variable feed: 10-25000 mm/min - Rapid traverse: 25000 mm/min - Slide stroke (nominal): 650 mm - Slide width: 460 mm - Slide stroke X-axis: 200 mm, rapid traverse: 25000 mm/min - Slide stroke Y-axis: 200 mm, rapid traverse: 25000 mm/min Fluid information: - Coolant supply: Deep drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction system - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote control: Flow rate: 1-38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled, stepless speed control. - Spindle head with tool holder connection. - 2 x tool holders for adjusting sleeves according to VDI 3208 SE10x60, firmly screwed to the spindle head of the motor spindle. Drill bushing carrier: - The drill bushing carrier can be positioned via the NC axis. - Cast-iron version mounted on the linear guide. - Drive for the W-axis via AC servo motor and ball screw with indirect, absolute position measuring system. Workpiece slide: - The workpiece slide is designed as a cross slide for vertical and horizontal positioning of the workpiece, for attaching clamping plates or special clamping devices. - The base body is cast-iron version with linear roller guides. - Drive for the X and Y axes via AC servo motors and ball screw. - Direct, absolute position measuring systems. Table top with clamping or alignment groove. Clamping table with NC dividing head for positioning: - With rotary axis and swivel axis. - With hydraulic clamping in the rotary axis and swivel axis. Technical specifications: - Swivel range: 270º - Rotation range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: Rotary axis ± 15" / Swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring system - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% Febvewh Rp Eom Uz Eegb - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Additional machine equipment: - 2 x holders for spring-loaded drill bushing holders, located on the drill bushing carrier. - Up to max. drill diameter 18 mm.

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 150 mm MK 4 480 x 480 mm 0,1 - 0,2 mm/U M 22 (St 60) 35 mm 80-1170 U/min 1,45 kW 0,34 t Foboh Dxw Revm Uz Ejgb 0,8 x 1,0 x 2,0 m Accesories: -Machine light (built-in) -Coolant device in the foot (built-in)

Year of construction: 2012, Condition: ready for operation (used), A Scharmann bench drilling and milling machine is available. The machine was completely overhauled in 2012, travel X/Y: 6150mm/3500mm, digital display: Heidenhain, including a setting table. An on-site inspection is possible. Fgsbvowhfpasm Uz Ejb