Used Drives for sale (19,319)

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Ppodpfx Amof Dlzujper Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, power capacity 15 kW volt 380 V ampere 28 A Ppjdpfx Aovttctempjr weight of the machine ca. 84 kg

Condition: excellent (used), Year of construction: 2014, Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: PIV Drives, gearbox type D-315-22H Ppsdsvxq Nuepfx Amper -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm -Weight: 1321 kg

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg Podpfsf Dlzqjx Ampspr sound condition 2 pieces available, price per piece [...]

Condition: good (used), Used Eurotherm Drives 590 Digital 150HP /110KW DC Drive. Eurotherm Drives 590 Digital series Model: Supply Voltage: 500 VAC, 222AMPS, 3 PH, 50/60 Hz Output Rating: 150HP Armature Output: 460 VDC, 270AMPS Field Supply Volts: 500 VAC, 1PH Ppodpfxsdl Amze Amper Field Output Current: 10 AMPS DC Auxiliary Supply: 115 VAC, 1PH, 4 AMPS

Condition: refurbished (used), Guarantee in months: 12 Item No.: Mitsubishi MDS-C1-V2-3520 Servo Drive This is a service exchange item, a deposit is also required of 3000 EUR, which will be refunded upon receipt of your faulty unit. Podpfx Aei Da S Sjmpopr *All service exchange items are subject to inspection, prior to any refund. If the service exchange item is beyond repair, the service exchange cost will not be refunded. However, a full report can be made available.*

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Ppsdpfx Amjw S Dmdoper Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Renishaw RMP600 3D probe, SK40, including case Ppsdpoy Dibfsfx Ampsr Condition: used (functional)

Condition: used, Renishaw RMP60 3D probe, SK40, including case Ppedpfxsy Dia Ue Ampsr Condition: used (functional)

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Condition: Glass cover damaged, but function not affected. Ppedpfx Asy Dia Iomper

Condition: excellent (used), functionality: fully functional, machine/vehicle number: B301000018, mileage: 619 km, first registration: 01/2019, overall weight: 6,500 kg, color: red, axle configuration: 4x4, fuel: diesel, fuel type: diesel, Year of construction: 2019, operating hours: 619 h, We offer this very good Skyjack SJ46AJ boom lift with 4x4 drive, year of manufacture 2019. This powerful and stable aerial platform is ideal for working at height, even on rough terrain. Manufacturer: Skyjack Model: SJ46AJ Year of manufacture: 2019 Drive: 4x4 diesel Psdpfxjy D Nm Ue Ampspr Operating hours: 619 Working height: 16 meters Own weight: 6,500 kg If you have any questions or require more information, please feel free to send us a message or call us.

Year of construction: 2009, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, Flat short-stroke linear axis for manual adjustment -Type: unfortunately without type designation -Travel: 25 mm -Position indicator: Fiama OP3A -Number: 1x linear axis available -Dimensions: 315/135/H55 mm Ppjdjxln T Hepfx Ampsr -Weight: 3.3 kg

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: Pjdpfxswx Aadj Ampopr - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Podew Uc T Ispfx Ampepr Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ppodpfexwaz Hox Ampor

Condition: good (used), machine/vehicle number: 22, mileage: 399,079 km, first registration: 01/2009, fuel type: diesel, fuel: diesel, driver cabin: other, emission class: euro5, Year of construction: 2009, MAN TGM 18.290 machinery carrier Year of manufacture: 2009 Euro 5 Mileage: 399,079 km Psdpjx Nqg Tofx Ampjpr Manual transmission Load platform length: approx. 7.60 m ID: 22

Condition: ready for operation (used), * Brand: Kleemann * Model: drive-unit * Roll lenght: 750 mm, Ø 420 mm * Beltwidth: 650 mm * Speed: 1,3 m/sec Pjdpfxsywmhvo Ampopr * Driving: 15 kW Stiebel gearbox

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Ppodpfx Amek Abtaepjr Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Ppsdpfxjrvmtde Amper Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Psdpfx Aok Abtdompspr Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, functionality: fully functional, load capacity: 10,800 kg, load capacity per storage section: 2,790 kg, frame height: 3,750 mm, construction width: 1,000 mm, Good day, We hereby offer you, without obligation, a used pallet racking system (multi-location system) from Galler, model OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Model: Omega Year of manufacture: unknown Frame load capacity max. 10,800 kg Load capacity per level max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (traverse length): 3,100 and 3,400 mm Scope of delivery: - 44 uprights 3,750 x 1,000 x 100 mm (H x D x W) - 215 beams 3,100 mm - 14 beams 3,400 mm - 14 upright impact guards, long, 985 x 120 x 55 mm (L x W x H) - 10 upright impact guards, short, 500 x 120 x 50 mm (L x W x H) - 12 floor corner protectors, green, 500 x 120 mm - 13 floor corner protectors, yellow, 450 x 110 mm - 1 floor corner protector, yellow, 450 x 180 mm - 2 upright double-row impact guards, plate 300 x 250 mm, upright height 350 mm - 24 upright load distributors 1,020 x 110 x 45 mm - 60 upright bases, as new - 21 upright bases, used, good condition - 10 mesh shelves for beams, galvanized, 2,900 x 1,020 x 40 mm - 19 mesh shelves for beams, galvanized, 2,625 x 1,020 x 40 mm - Various smaller mesh shelf pieces for beams, galvanized - 1 lot of distance plates for OMEGA upright bases - 1 pallet upright connector profiles, 900 x 30 x 24 mm Note: The above technical data was taken from the operator's manual, manufacturer brochures, or other sources, for which we cannot guarantee accuracy or completeness. We would be pleased if this pallet racking system is of interest to you. Your service team, Podpfxjyz A Sxo Ampepr Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 1,500 kg, Good day, We are pleased to offer, without obligation, a used complete pallet racking warehouse (multi-position system) from the manufacturer Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Compartment width: 2,700 mm Pedpsyz A Itjfx Ampspr Compartment load: 1,500 kg Bay load: 1,500 kg Buckling length: 1,850 mm Frame height: 3,600 mm Max. run length: approx. 179 linear meters Scope of delivery: 64 upright frames 3600 x 1100 x 100 mm (H x D x W) 100 beams 2700 x 100 x 70 mm (L x H x W) 2 beams 1850 x 100 x 70 mm (L x H x W) 16 impact protection elements for a single row racking line, 1230 x 240 x 400 mm (L x W x H) 2 impact protection elements for a double row racking line, 2600 x 240 x 400 mm (L x W x H) 22 push-through protection grid elements 3600 x 1100 x 100 mm (H x D x W) Note: The above technical data has been taken from the operating manual, manufacturer’s brochures, or other sources. We do not assume any liability for the correctness or completeness of this information. We would be pleased if this pallet racking warehouse is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, functionality: fully functional, Year of construction: 2023, WEBER Drive Unit MVX — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Psdpfx Amsy A Hdujpopr - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 750 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Ppodoy Ep Thopfx Ampor Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: ready for operation (used), spindle bore: 56 mm, turning diameter: 360 mm, center height: 180 mm, WEILER Commodor B incl. 3-axis digital display Heidenhain -GS identification -3-axis digital readout / Heidenhain -Year of manufacture: 1991 -Center height: 180 mm -Swing diameter over bed: 330 mm -Distance between centers: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 25-2000 rpm -Automatic longitudinal / cross feeds -Thread cutting / Metric / Inch / Module etc. -Multifix tool post with inserts -Chuck guard -2x Emergency stop -3-jaw chuck -Chip guard/rear wall -Very well maintained condition -Machine feet Psdpfx Amjy Ak S Aspspr -Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters / Weight 1600 kg Errors / omissions excepted.