Used other drilling machines and boring mills for sale (53)

Year of construction: 1986, condition: excellent (used), functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm Dsdpfx Ajzzw U Esc Uswb

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 50,000 kg, spindle motor power: 65,000 W, spindle speed (max.): 2,000 rpm, table length: 2,500 mm, table load: 25,000 kg, table width: 2,000 mm, tool weight: 40,000 g, number of slots in tool magazine: 40, swivel angle B-axis (max.): 360 °, number of axes: 6, This 6-axis DÖRRIES SCHARMANN Heavycut 1.2 TDV4 was manufactured in 1989. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 2,500 mm with a maximum table load capacity of 25,000 kg. If you are looking to get high-quality boring capabilities, consider the DÖRRIES SCHARMANN Heavycut 1.2 TDV4 boring machine we have for sale. Contact us for further details. Technical Specifications * Control: Heidenhain iTNC 530* X-Axis Travel: 2,500 mm* Y-Axis Travel: 2,500 mm* Z-Axis Travel: 800 mm* W-Axis Travel: 700 mm* V-Axis Travel: 1,500 mm* B-Axis: 360°* Work Spindle Diameter: 150 mm* Tool Holder: ISO 50 DIN 2079* Number of Gear Stages: 3* Table Size: 2,000 × 2,500 mm* Table Height: 1,050 mm* Table Load Capacity: 25,000 kg* V-Axis Feed Rate: 1–10,000 mm/min* B-Axis Feed Rate: 2.4 rpm* X/Y/Z/W Rapid Traverse: 10,000 mm/min* X/Y/Z/W Feed Rate: 1–10,000 mm/min* Gantry Beam Cross-Section: 325 × 325 mm* Tool Magazine: Chain Magazine* Tool Magazine Capacity: 40 tools* Max. Tool Diameter: 340 mm* Max. Boring Bar Diameter: 500 mm* Max. Tool Length: 500 mm* Max. Tool Weight: 40 kg* Tool Magazine Rapid Speed: approx. 40 m/min* Tool Magazine Creep Speed: approx. 1.2 m/min* Coolant System: Coolant through spindle* Coolant System: External coolant nozzles* Coolant Filtration: Paper band filter* Process Monitoring: Adaptive Control* Handwheel: HR 550 FS* DNC: Heidenhain DNC* Load Adaptive Control: Yes* KinematicsOpt: Yes* Global Program Settings: Yes* HDR and SIK: Yes Additional equipment / accessories Dwodpjzv Ruhofx Ac Ueb * WFK 100 S* WFK 50 S* Automatic mounting of milling head* Automatic milling head clamping* Milling head drive via controlled shaft* Tool cooling with 4 nozzles* Chip conveyor* Torque monitoring* Position displays Retrofit / Modernization in 2013 * CNC Control: Heidenhain iTNC 530* 19" TFT colour flat-panel display BF 760* TE 745 TouchPad with integrated machine control panel* HR 550 FS electronic handwheel with grid and connection components* HDR and SIK* Global Program Settings* KinematicsOpt* Load Adaptive Control* Heidenhain DNC Technical Specification Taper Size ISO 50 Through-spindle Coolant Yes

Year of construction: 2020, condition: ready for operation (used), spindle motor power: 8,500 W, number of axes: 3, This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine. Dwjdpfx Ajzvu Rgec Uob Additional equipment • Clamp & stripper units for secure work holding • 12 sets of clamps • Position clamp ensures firm fixing during hole processing Machine Benefits Technical Machine Benefits • Travelling type: gantry type • Processing capacity: max. Processing capacity: 4500 × 2000 mm • Max drill bit capacity: carbide drill 50 / taper drill 50 • Hydraulic motor: 3. 7 kw • Provides pressure for position clamps, stripper, and alignment unit • Cutting fluid cooling system Extra Information Control & Interface: CAD file interface with 18 patterns supported Windows-based operating system with USB file upload Machine weight: 12000 kg Condition: Machine in excellent condition, with very low working hours.

Year of construction: 1991, condition: not inspected (used), functionality: unexamined, Robust column drill press, Thyssen Hüller Hille, type UG24 Dedpjzvyhdofx Ac Uewb Year of manufacture: 1991 For industrial use Operating voltage: 380 V, 50 Hz Current consumption: 16 A Operating hours according to the hour meter: approx. 1,678.3 h Complete set of spur gears included.

Year of construction: 2009, operating hours: 3,093 h, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, overall weight: 8,900 kg, total width: 3,400 mm, total height: 3,160 mm, product length (max.): 5,800 mm, spindle speed (max.): 1,600 rpm, table load: 2,500 kg, number of axes: 5, This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 – 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details. • Table size: 1000 x 1120 mm • B axis (table rotation): 360° • Feed rate (X/Y/Z): 4000 mm/min • Spindle diameter: 90 mm • W axis travel: 710 mm • Control cabinet dimensions (L x W x H): 2.0 x 0.75 x 2.0 m • Temperature range: 15–40 °C • Electrical: 3-phase/50 Hz; 380 V rated voltage; 24 V control voltage • Connected load: 40 kW • Fuse rated current: 100 A Dwsdpey Hvgtofx Ac Ujb • Typical power consumption: approx. 7.5 kW • Spindle running time: 3069 h • Power-on hours: 10402 h • General overhaul: 2009 General Information Retrofit Retrofit includes: • Control system: TNC 320 • New drives in all axes • New table • New clamping system • New media units • New hand control unit • New coolant system • New hydraulic unit • 30 measuring scales (linear measurement systems) • Control manufacturer: SK 40 • CNC control: TNC 320 • Complete electrical retrofit • New wiring throughout the machine • Integration of CNC system (TNC 320) • New inputs and outputs (I/O) • New sensors and measuring systems • Updated control circuits and safety circuits • Modern CNC control system • Improved accuracy due to new measuring systems • Higher reliability • Better performance due to new drives • Reduced downtime due to new auxiliary units • New electrical documentation • Updated schematics • Includes systems for power supply, control, machine interface, operator panel, and drivesMachine base remains:MSC Chemnitz table boring machineType: BFT 90/5 MSC – 5 axes Technical Specification Taper Size SK 40

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Table: 600 x 470 mm Drilling stroke: 180 mm Dwsdpjzwuhbjfx Ac Ueb Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Dsdpfx Acozwfqye Ujwb

Year of construction: 1995, condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, spindle speed (max.): 1,600 rpm, number of axes: 5, This 4-axis WOTAN Rapid 1 boring machine was manufactured in 1995 and retrofitted in 2017. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The 360° rotary table allows for multi-sided machining, enhancing efficiency. If you are looking to get high-quality boring capabilities, consider the WOTAN Rapid 1 machine we have for sale. Contact us for further details. • B-axis (rotary table): 360°; max weight capacity 4 tons • Key highlights: • 360° rotary table enables multi-sided machining in a single setup, reducing downtime and improving tolerances • 2017 Fanuc control retrofit offers a modern interface and compatibility with current programming standards Technical Specification Dsdpfozqb Easx Ac Uowb Taper Size BT 50

Year of construction: 2017, condition: used, overall weight: 45,000 kg, total length: 8,500 mm, total width: 6,500 mm, total height: 5,400 mm, Technical data (XYZ): X 3500 mm / Y 2500 mm / Z 1700 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 40-tool changer, spindle Ø130 mm, 3000 rpm, T-slot clamping table 2400 × 2000 mm, spindle extension 730 mm, chip conveyor, coolant system with filter unit, separate cooling unit, protective fence enclosure. Travel X-axis: 3500 - mm Dimensions (LxWxH) approx.: 8500 x 6500 x 5400 mm Travel Y-axis: 2500 - mm Weight approx.: 45,000 kg Travel Z-axis: 1700 - mm Year of construction: 2,017 Condition: in working order Dwjdpfx Aozwtaijc Ujb Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Dwodpfozu Szyox Ac Ueb

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Dsdpfx Acezuzzis Uowb

Year of construction: 2007, condition: like new (used), FICEP 601 DZB CNC DRILLING LINE with 4 way SCRIBING FACILITY I-Beams (without camber): Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 310mm. UNP Channels (web downwards): • Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 300mm. Angles • Flange height (unequal flanges as well) minimum 50 x 50 x 5mm maximum 250 x 250 x 40mm. Flats • Width minimum 100nn maximum 610mm. Dwsdpeh N Taaofx Ac Ujb Square tubes • Size minimum 60 x 60mm maximum 300 x 300mm. Rectangular tubes • Size minimum 60 x 30mm maximum 600 x 300mm. All beams • Maximum thickness that can be drilled 50mm. Maximum length (infeed) 12000mm.

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Djdsig T Amjpfx Ac Ujwb Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Dwodjq Hgg Uspfx Ac Ujb ■ Safety devices (safety bumpers) ■ Year of construction 2007

Year of construction: 2010, condition: good (used), Main Technical Specifications Profiles to be processed Dedpfx Acsig T Axo Uswb • Max. section volume mm 1100 x 1100 • Bar length max. metres 12 Drilling Capacity • Drill heads no. 1 • Spindles per vertical drill head no. 1 • Drilling diameter max. mm 31.75 • Drilling diameter (with reduced feed) max. mm 40 • Power per head (a.c.) kW 5,5 • Program controlled spindle rotation speed with continuous variation RPM 180 - 1000 Other Specifications • X axis positioning speed (portal) mt/min. 20 • Y axis positioning speed (drill head) mt/min. 4

Year of construction: 2012, condition: excellent (used), 3 Spindle. 21 Metres of In‐feed rollers. 21 Metres of Out‐Feed Rollers. Dwsdpfx Acoh Rrxpe Ueb 1.25 metres Sections. Roller Feed measuring. Cross Transfers.

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Dwedpfx Acsxyk Tls Ueb

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Dedpsylbrqsfx Ac Uewb

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Dodjy Eqtispfx Ac Uowb

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Dodpfx Asttv Uajc Ujwb

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Dedpfjxp Rb Isx Ac Ujwb

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Dedpfxot Hkh As Ac Uewb

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Dwedsy Rtfzjpfx Ac Ueb

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China. Dodpfxexf Ikrj Ac Uswb

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Djdpfx Acoy Tn Nto Uewb