Used Highspeed radial drilling machines for sale (42)

VAUMATEC / DONAU DR 32

Call

Condition: excellent (used), Year of construction: 2017, Drilling capacity in steel, 60 kg/mm² 32 mm Drilling capacity in cast iron, GG 20 45 mm Table clamping surface 1200 x 500 mm Distance from spindle center to column center 418 / 1018 mm Max. workpiece height 660 mm Height adjustment of the drilling head 400 mm Work table height 870 mm Column diameter 195 mm Drill spindle holder MK 4 Speed range 41 - 1800 rpm Feed range 0.1 - 0.15 - 0.2 - 0.3 mm Drill spindle stroke 175 mm Boom, rotatable 360 Drive power 1.5 / 2.2 kW Dimensions approx. L x W x H 1200 x 2200 x 2300 mm Weight 1800 kg Bipnhb3rj3s Accessories / special features: - Thread cutting device - Coolant device - Operating instructions with electrical and hydraulic diagram The machine was overhauled in 2017. The following work was carried out: Electrics, hydraulics, mechanics, geometry

more

Listing

Wiefelstede

1,085 km

Quick radials - Drilling machine

DONAU Donauflex-128

Call

Condition: used, Year of construction: 1995, machine/vehicle number: 128 122, Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 500 x 1055 mm -Projection: 1120 mm -Cone mount: MK4 -Motor power: 1.5/2.2 kW -Speeds: 45-2240 rpm, electrically switchable in steps -Columns: Ø 150 mm -Spindle stroke: 160 mm Cq2vf3awac -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 2000/1200/H2320 mm -Weight: 1800kg

more

Listing

Lüneburg

1,237 km

Donau DR 32

Call

Condition: good (used), Outreach: 920 mm Speed range: 41 - 1.800 rpm Baqyqth2h Operating voltage; frequency: 380 V; 50 Hz Equipment: - Thread cutting device - machine light - 2 T-slots rear - 2 T-slots rear left

more

Listing

Ahaus

1,037 km

BERNARDO SRB 40 NC

Call

Condition: new, threading 30 M bore capacity in steel (diameter) 40,0 mm workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1.210 x 520 mm quill stroke 200 mm feed range - spindle 0,08 - 0,5 mm/U total power requirement 2,2 kW weight of the machine ca. 2.800 kg. dimensions of the machine ca. 2,45 x 1,2 x 2,72 m characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device Ciqpxgyce2 - Height-adjustable protective cover

more

Listing

Schwabach

1,411 km

DONAU , DR 32

Call

Condition: ready for operation (used), Used machine, suitable for rough work! Will be sold cheap. . Technical data : Bipmfraiprk Drilling capacity into full 32 mm / pc. 60 Tapping capacity into full M 32 mm / pc. 60 Mounting MK 4 18 Speeds 59 - 2580 rpm 3 feeds 0.1 / 0.15 / 0.2 mm/rev . Horizontal movement of the drilling head approx. 1000 mm Distance table - spindle nose max. 650 mm Quill stroke 190 mm .

more

Listing

Neunkirchen

1,148 km

DONAU DR 40 DIGI

Call

Condition: used, Year of construction: 1988, CONTROLS .. NC controls WORKING RANGE - BORING .. drilling capacity full bore (steel): 40 mm .. throat (max): 800 mm SPINDLE / HEAD .. spindle revolutions (min): 335 /min .. spindle revolutions (max): 1800 /min .. number of gears: 2 .. tool fixture: MK 4 Guxepob TECHNICAL SPECIFICATION .. table surface (left-right): 1000 mm .. table surface (front-back): 500 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2500 mm .. space requirements -front/back-: 1250 mm .. total height: 2500 mm - 9`600h operating hours - div. tool holders, - coolant system - with cube table

more

Listing

Friesenheim

1,258 km

Donau Danuflex 135

Call

Condition: excellent (used), Year of construction: 1998, Donau Danuflex 135 high-speed radial drilling machine Manufacturer: Donau Type: Danuflex 135 Condition: good, used year of construction 1998 Stepless speed adjustment Infinitely variable quill feed Thread cutting device Dimensions and travel Tool holder MK 4 Column diameter mm 170 Table dimensions mm 1200 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke mm 165 Column stroke mm 450 Drilling capacity into solid St 60 mm 35 GG 22 mm 42 Tapping St 60 M 30 Bic7musas9p GG 22 M 36 AC motor, frequency-controlled kW 4.0 at 100 % ED. Speed range: min -1 20 - 3200 Feed infinitely variable mm/rev. 0.02 - 0.7 Machine light Spindle protection

more

Listing

Kreis Bergstraße, Deutschland

1,238 km

Radial Drill

DONAU DR 32

Call

Condition: used, No. 5345: 1 used radial drill MK 4 manufactured by DONAU Type DR 32 Working area: Table 1060 x 600 mm, Spindle Taper MK 4 Speed range 41 - 1800 min-1 Drill head adjustment radial 570 / vertical 400 mm Lfjwgbom3l Distance spindle nose - table: 260 - 660 mm Distance spindle centre - column: 260 - 830 mm Space requirement approx. 2.5 x 2.5 x 3 m Weight approx. 1600 kg

more

Listing

Barsbüttel

1,217 km

Radial Drilling Machine

SALTEC Z 3050 x 16/1

Call

Condition: as good as new (ex-display), bore capacity in steel (diameter):50 mm spindle cone:V MK spindle stroke:340 mm hight above plate:1230 mm revolutions of the spindle, 16 steps:25 - 2000 U/min Height adjustment:580 mm automatic feed rates:0,04 - 3,2 mm travel of the spindle head on the arm:1250 mm table height:500 mm dimension of the dice table:630 x 500 x 500 mm Motor output:4 kW range L-W-H:2500 x 1070 x 2840 mm weight:3500 kg Machine description: - stable cast body - Gearbox with hardened and ground gear wheels in oil bath - Thread cutting via spindle reversal - Hardened and ground heavy column - right-left-run - drilling depth limitation - high spindle torque - Feed overload clutch - quiet running - Hydraulic, switched feed and spindle gear with preselection - Hydraulic clamping of the stop, the column and the drill head - Ground and hardened guideways Udcssdc0i - ergonomically arranged controls - Lighting - standard - Coolant system - standard - Dice table - standard

more

Listing

Wiefelstede

1,085 km

High-speed radial drilling machine

DONAU DR30

Call

Condition: used, Year of construction: 1962, machine/vehicle number: 517-3, Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Cone mount: MK4 -Motor power: 1.35/1.8 kW -Speeds: 41-1700 rpm -Columns: Ø 200 mm D8jpl99 -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

more

Listing

Bruchsal

1,259 km

Donau DR 23

Call

Condition: good (used), DONAU DR 23 / High-speed radial drilling machine / cantilever drilling machine -Drilling capacity / steel approx. 25mm -throat depth approx. 700mm -Table surface approx. 1200x600mm -spindle cone MK 3 -Speed range 70-1550rpm -feed range 0.075-0.3mm /automatic feeds -Drilling depth 130mm -Tapping device -Electric motorized drill head adjustment -Hydraulic clamping -Gear shifting -Lateral clamping surface for larger workpieces -Drill chuck -Documentation Dimensions: LxWxH 2x1.7x1.9 meters D7szlwg Weight approx. 2000Kg Errors / input errors excepted

more

Listing

Schijndel

948 km

Cord radial drilling machines

Irsasa RSH32

€6,500

Call

Condition: good (used), Description Table: 1100 x 500 mm Spindle cone: Morse 3 working capacity: 32 mm tapping capacity: M30 spindle stroke: 150mm column stroke: 410 mm Minimum radius: 300 mm B8xecls8 Maximum radius: 900 mm Rotation on column: 360º Rotation speed: 12, from 102 to 2000 rpm Clamping: hydraulic Weight: 1250 kg.

more

Listing

Eislingen/Fils

1,357 km

High-speed radial drill SR 32 G

OTTO MÜLLER SR 32

Call

Condition: used, Year of construction: 1966, machine/vehicle number: 508, power capacity:2,2 kW clamping table:1300 x 550 mm arm length:1000 mm bore capacity in steel (diameter):32 mm bore spindles - Morse Taper:MK4 turning speed range - stepless:80 - 1500 U/min dimensions of the machine ca.:1,2 x 1,2 x 2,3 m feed:8 Stufen 0,003 - 0,25 mm/min workpiece height max.:650 mm lighting:Ja column diameter:210 mm coolant:Ja total power requirement:3,2 kW Lqpl2mpn weight of the machine ca.:1,3 t

more

Listing

Schemmerhofen

1,391 km

Otto Müller SR 32 G

€4,800

High-speed radial drilling machine

Call

Condition: excellent (used), High-speed radial drilling machine Otto Müller SR 32 G MK 4 with thread cutting device Speed infinitely variable 75 - 1500 Feed rate 8 steps Bic8hxz8eas Spindle stroke 200 Drilling capacity steel 32 Height adjustment electric Clamping Hydraulic Spindle distance front table 200 - 600 Side table + 220 Base plate + 850 Table sizes : front table 1350 x 550 / side table 570 x 640 optional base plate 1500 x 1000 Accessories : coolant system , various clamping devices , quick-action drill chuck Condition : very good , all functions flawless To be inspected under power free loading Schemmerhofen

more

Listing

Haiger

1,162 km

Gillardon GBR 32

€9,500

rapid radial drilling machine DONAU

Call

Condition: excellent (used), Year of construction: 1988, GSR 32 G high-speed radial drilling machine Technical data GSR 32 G Continuous drilling capacity in E335 32 mm Continuous drilling capacity in GG 20 40 mm Thread cutting (E335 / GG 20) M 27 / M 36 Feed rates approx. 0.1 - 0.2 - 0.3 mm / U Short spindle MK 4 Spindle stroke approx. 150 mm Dmp3od Drive power approx. 2.0 / 2.4 kW Speed range of the main spindle 80-2000 min-¹ / 51-1000 min-¹

more

Listing

Minden

1,160 km

DR 32

€4,300

Call

Condition: used, machine/vehicle number: 882-3, drill capacity in steel 32 mm drill capacity in cast iron 45 mm outreach 235 up to 835 mm drill spindle holder MK 4 drill spindle stroke 190 mm thread cutting device speeds - 18 steps - 41 up to 1,800 rpm Cirqxdn89s advance speeds - 4 - 0.1 / 0.15 / 0.20 / 0.30 mm per rotation table size 1,200 x 500 mm distance spindle - table 260 up to 660 mm working height 870 mm coolant device electrical data 380 V / 2.2 KW space requirements width - 1,200 x depth - 1,600 x height - 1,950 mm weight approx. 1,600 kg

more

Listing

Schwabach

1,411 km

WEYRAUCH , SW-32 G

Call

Condition: used, Technical data : Drilling capacity 32 mm motor power 1,8 / 2,2 kW mounting MK 4 quill stroke approx. 160 mm . 12 speeds 102 - 2000 rpm 3 feeds 0.1 / 0.2 / 0.3 mm/rev. Yvg3ke0k . Horizontal movement of the drill head approx. 800 mm Distance spindle to round column below, approx. 20 - 820 mm Table clamping surface approx. 450 x 1200 mm . with thread cutting device . .....

more

Listing

Bächingen an der Brenz

1,404 km

DONAU DR 40 Z

Call

Condition: excellent (used), Year of construction: 1992, Work table 500mm x 1200mm Whla0zwaa cantilever travel 600mm tool holder SK 40 18 speed steps max 1.800 rpm. 5 feed stages Thread cutting device Coolant device Operating instructions Test report

more

Listing

Friesenheim

1,258 km

HKS 34 MG high-speed radial drilling machine

Donau Danuflex 145

Call

Condition: good (used), Year of construction: 1998, Donau Danuflex 145 high speed radial drilling machine Iormrcpg0b Manufacturer: Donau Type: Danuflex 145 Year of manufacture 1998 Condition Fully functional condition, under power until mid-December 2023 or end of January 2024. If necessary, available as early as week 45. Stepless speed adjustment Stepless quill feed Threading device Tool holder: MK 4 Table dimensions: 1,200 x 600 mm Number of T-slots: 5 Distance of the T-slots: 125 mm quill stroke: 195mm column stroke: 450 mm Drilling capacity into solid St 60 mm: 45 thread cutting St 60: M36 Power: 5,5 kW Speed range: 15 - 2.800 min-1 feed stepless mm/rev. 0,02 - 0,7 dimensions min: 1.200 x 1.974 x 2.650 mm weight: 2.600 kg

more

Listing

Sendenhorst

1,099 km

HKS 34 MG

€5,990

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 1998, High Speed Radial Drilling Machine Radial Drilling Machine Drilling (second-hand) Manufacturer HKS Model 34 MG Drilling capacity in steel ST 52: 35.0 mm Tapping in steel ST 60: M20 Throat: 910 mm Spindle mount MK 4 spindle stroke 170 mm Speed: 38 - 2000 rpm infinitely variable column diameter: 150 mm table clamping surface: 1050 x 420 mm Feed range: stepless Total power requirement: 5 kW Machine weight approx. 1700 kg Dimension depth 1300 mm width 1200 mm H 2350 mm (max.2850mm) automatic spindle feed electromotive drill head adjustment jib forward-backward movable hydraullic clamping lateral clamping of workpieces thread cutting device Mrzdxmm0 Coolant device Infinitely variable feed range Infinitely variable speed range The machine is in very good condition and ready for immediate use. Forklift available, free loading truck cheap shipping possible Location of the machine 48324 Sendenhorst The machine is differential taxed according to §25. You will receive a proper invoice with the purchase.

more

Listing

Mörsdorf

1,393 km

DONAU DR 32

Call

Condition: good (used), Quick radial drilling machine make DONAU type DR 32 Make # 784-4 Technical data: Drilling capacity ST 60 32 mm drilling capacity GG 22 45 mm Tapping capacity M 26 / M 36 Spindle adaptor MK 4 18 speeds 41 - 1800 rpm 4 autom. feeds 0,1 - 0,3 mm column diameter 195 mm quill stroke 190 mm table dimensions 1200 x 500 mm throat depth 920 mm max./min. distance spindle/table 670 / 220 mm table height 880 mm drill head height adjustment 400 mm drive power 2,0 / 2,4 kW weight 1700 kg with - tapping device - hydr. central clamping Gkzbww - autom. feeds - cooling device used, in good condition

more

Listing

Rödermark

1,235 km

GILLARDON GSR 32

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3862-8063-564, Offer 23036 Technical data: - Drilling capacity into solid steel ST 60 32 mm - drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min / max distance spindle - table 310 / 610 mm - drilling radius min / max 400 / 1200 mm - table height 720 mm - table size 1200 x 500 mm - drive 400 V / 1,6 / 2,9 kW - space requirement approx. W 1200 x H 2800 x D 2300 mm 0p2fdo3 - weight approx. 1500 kg - with: - thread cutting device - hydr. columns + jib clamp - coolant device - T - grooves vertical at the rear side of the machine

more

Listing

Schwabach

1,411 km

DONAU , DR 32

Call

Condition: ready for operation (used), Stressed machine , suitable for rougher work ! Sold cheaply. . Technical data : Drilling capacity into the full 32 mm / pc. 60 Tapping capacity into full M 32 mm / pcs. 60 Mounting MK 4 18 Speeds 59 - 2580 rpm 3 feeds 0.1 / 0.15 / 0.2 mm/rev. . Horizontal movement of the drilling head approx. 1000 mm Distance table - spindle nose max. 650 mm E99ofkmqft quill stroke 190 mm .

more

Listing

Bächingen an der Brenz

1,404 km

DONAU DR 32

Call

Condition: excellent (used), Year of construction: 1979, Work table 750mm x 1200mm cantilever travel 800mm tool holder MK 4 Bfurbstgick 5 feeds 18 speeds max. 1.800 rpm Thread cutting device Coolant device Operating instructions Protective device on the drill Test report

more

Listing

Kaufungen

1,234 km

Weyrauch SW 32 G

Call

Condition: good (used), machine/vehicle number: 425, used high speed radial drilling machine make Weyrauch type SW 32 G machine number 425 Technical data : drilling capacity 32 mm motor power 1,8 / 2,2 kW mounting MK 4 Cobkscucs3 quill stroke approx. 160 mm . 12 speeds 102 - 2000 rpm 3 feeds 0.1 / 0.2 / 0.3 mm/rev. . Horizontal movement of the drilling head approx. 800 mm distance spindle to round column bottom, approx. 20 - 820 mm table clamping area approx. 450 x 1200 mm

more

Listing

Goldenstedt

(dealership location)

1,114 km

WEWAG ECONOMY GRS 30

Call

Condition: used, Year of construction: 1973, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools Bs0hjvyl07

more

Listing

Nijverdal

996 km

EFI FJR 4 ( 3153 )

Call

Condition: excellent (used), High-speed radial drilling machine Inv nr. 3153 Make EFI G28pmjxmx type FJR 4 Technical data: * Drilling capacity 32 mm * quill stroke 150 mm * Spindle speed 80 - 2800 rpm. * Spindle adaptor MK 4 * Feed rates 0.1 / 0.15 / 0.26 mm/rev. * Tapping device * Coolant device * throat / radius 300 / 710 mm * Distance spindle / table 210 / 585 mm * Table size approx. 585 x 890 mm weight approx. 850 kg

more

Listing

Cestona

1,214 km

Radial drill

IRSASA RSE 32

Call

Condition: reconditioned (used), Brand: IRSASA Model: RSE 32 Type: Radial Mx330c Ø Maximum drilling diameter 32 mm Ø Maximum drilling diam. in steel 25 mm Ø Maximum threaded diameter: M30 Ø Maximum threaded diameter in steel: M24 Spindle travel : 150 mm Column travel : 410 mm Rotation on column: 360º Speeds : 12

more

Listing

Mühlheim am Main

1,229 km

HKS HKS 34 MG

Call

Condition: excellent (used), Year of construction: 1986, Machine type: Fast Radial Drilling Machine Manufacturer: HKS Type/Model: HKS 34 MG Year of construction: 1986 Machine condition: very good Offer type: used machine Technical data Table: 1200 x 560 mm side table: 550 x 340 mm Drilling diameter: 45 mm Drilling depth: 170 mm Speed range: 38 - 2000 rpm. Tool holder: MK4 Outreach: 930 mm Drive: 1.5 / 3.0 kW Remarks: Cy3xsnfsli automatic feed with el./magn. release, tapping device, coolant device, vertical clamping plate 500 x 670 mm drill chuck Weight: 2000 kg The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location. We will be pleased if you take an interest in our offer. For further information or if you have any questions, please do not hesitate to contact us. The data are mechanically translated, Translation errors are possible. Errors and changes excepted. Subject to prior sale.

more

Listing

Bächingen an der Brenz

1,404 km

DONAU DR 32

Call

Condition: excellent (used), Year of construction: 1974, Work table 500mm x 1200mm cantilever travel 600mm tool holder MK 4 5 feeds 18 speeds max. 1.800 rpm Bfuq78l2wjd Thread cutting device Coolant device Operating instructions Protective device on the drill Test report

more

Listing

GENKO ATB 30 S motorische Verfahrweg 1900 mm

Staufenberg

1,232 km

Rapid Radial Drilling Machine MK 3

GENKO ATB 30 S motorische Verfahrweg 1900 mm

Call

Condition: good (used), Year of construction: 1972, High speed radial drilling machine make GENKO type ATB 30 S year of manufacture 1972 with motorized travel = 1900 mm on basic slide B7utcejwz2 technical data: drilling capacity i. ST 60 25 mm drilling capacity i. ST 60 32 mm spindle mount MK 3 quill stroke 150 mm distance spindle/bottom kl./gr. 620 / 1800 mm radial arm adjustable vert. 1180 mm Movement horizontal on slide mot. 1900 mm Movement of boom hor. 600 mm Boom rotatable 360 Spindle head inclinable up to 45° on both sides 14 spindle speeds 22 - 1920 rpm. 3 aut. feeds 0,1; 0,2; 0,3 mm/rev. drive power 1,5 kW weight approx. 1,5 t outer dimensions approx. 3350 x 700 x 2800 mm with - aut. feed - hydr. central clamping - tapping device - mot. stroke movement - central hydr. clamping - motorized travel = 1900 mm on basic slide used, in good condition

more

Listing

Kreis Bergstraße, Deutschland

1,238 km

DONAU DR 28 Z

Call

Condition: used, No. 4657: 1 used radial drilling machine make DONAU type DR 28 Z table 1200 x 500 mm drive power: 2 / 3 kW Thread cutting device spindle MK 3, O7pmb speed range 45-2240 min-1 Drilling spindle stroke 200 mm feeds 0,075 - 0,6 mm/rev Table height 800 mm above floor T-slots lateral + rear Drill head stroke vertical approx. 430 mm Distance. clamping surface / spindle nose approx. 310-740 mm Drill head stroke radial approx. 1000 mm Space requirement approx. 2.5 x 2.5 x 3 m, weight machine approx. 1.500 kg

more

Listing

Haiger

1,162 km

Radial Drilling Machine

HKS 34 MT

€16,500

Call

Condition: as good as new (ex-display), Year of construction: 2008, Universal Drilling Machine from HKS ( Germany ) apply for toolmaker , mold maker, education and Locksmith Drilling Cap. 45mm Table : 1200 x 560 mm Drilling capacity 45mm Spindle mount MK 4 Dwhpvjz0m7 Quill stroke 150mm Speeds / Steps 102-2000 U/min Feeds / Steps 0,1 0,2 0,3mm/U Motor 1,5 KW

more

Listing

Gemmingen

1,286 km

Weyrauch SW 32 VE-SL

Call

Condition: new, Year of construction: 2023, Technical data: SW 32 VE-SL Delivery time: available at short notice! Also possible with Digitalreadout Heidenhain ND 7013 RADIAL! Throat: 1200 mm Permanent drilling capacity in E335: 32 mm Permanent drilling capacity in EN-GJL-200: 40 mm Thread cutting in E335 / EN-GJL-200: M27 / M36 Feeds approx .: 0.08-0.1-0.2-0.3 mm / rev (other variants possible!) Feed number: 4 pieces Short spindle: MK 4 Spindle stroke approx .: 200 mm Speed range: 80-2000 rpm Drive power approx. 2.0 / 2.4 kW Standard equipment: Bjcx7siyj8 Electromagnetic feed clutch with overload protection and 3 push buttons in the hand cross, Lockable main switch, Full engine protection, Emergency stop switch latching in the front panel, Digital speed display, Protection class IP 54, clockwise rotation via contactor control, Operating voltage 400 V, 50 Hz, Control voltage 24V, Swivel spindle protection, with microswitch, Execution according to VDE and UVV, Painting: smooth paint RAL 7035 light gray / RAL 7016 anthracite, speed adjustment infinitely Advantages of our radial drilling machines: - Automatic threading device with changeover when the drilling depth is reached - Machined clamping surface on the back of the machine - Infinitely variable control gear for spindle speed - Easy, time-saving positioning of the drill head when the workpiece is stationary - Electromagnetic feed clutch - Telescopic steel cover for vertical column - Machine body and table in one piece - Digital speed display - Hydraulic central clamping system - Made in Germany

more

Listing

Tata

1,972 km

Donau DR 40 DIGI

€4,670

Call

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Cfjtqjhzca Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

more

Listing

Bächingen an der Brenz

1,404 km

DONAU DR 32

Call

Condition: refurbished (used), Year of construction: 1974, Work table 500mm x 1200mm cantilever travel 600mm tool holder MK 4 drilling capacity 32mm in steel Tapping device Coolant device Electrical system 24V control voltage emergency stop 2-channel Protective device on drill C0hjlo0qcc General overhauled 2023 12 months warranty New painting RAL 7035/7031

more

Listing

Staufenberg

1,232 km

EFI FGR 204

Call

Condition: good (used), Fast radial drilling machine/ Articulated arm radial drilling machine Fabr. EFI Type FGR 204 Make # 105/8104 Technical data: Drilling capacity in steel St 60 32 mm drilling capacity in GG 18 38 mm quill stroke 170 mm 12 spindle speeds 80 - 2800 rpm. spindle adaptor MK 4 Cfwvrplk3 3 automat. feeds 0,1 / 0,15 / 0,26 mm/rev. throat / radius 300 / 710 mm distance spindle / table 210 / 585 mm distance spindle / base plate 945 / 1320 mm column diameter 160 mm table size 585 x 890 mm connected load 1,3/ 1,9 PS weight approx. 887 kg outer dimensions approx. 1500 x 850 x 2060 mm used, in good condition

more

Listing

Bächingen an der Brenz

1,404 km

DONAU DR 32

Call

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm cantilever travel 600mm tool holder MK 4 drilling capacity 32mm in steel Thread cutting device Coolant device Electrical system 24V control voltage emergency stop 2-channel Protective device on drill General overhauled 2022 12 months warranty 9it9h0bxd3 New painting RAL 7035/7031

more

Listing

Bächingen an der Brenz

1,403 km

CNC Quick Radial Drilling Machine

DONAU Danuflex 130

Call

Condition: excellent (used), Year of construction: 2005, Work table 630 x 1200 mm with 5 T-slots 18 mm Boom travel 900 mm Drilling spindle MK 4 with ejector without DIN ejector wedge Infinitely variable speed setting Infinitely variable spindle sleeve feed Thread cutting device Coolant system Drilling capacity 30mm in pc. 60 Ckormb7k

more

Listing

Bächingen an der Brenz

1,404 km

DONAU Danumeric 440

Call

Condition: excellent (used), Year of construction: 2000, Machine version - Work table 1800 x 600 mm with 4T grooves - extension arm travel 1050 mm - Drilling spindle SK 40 with tool clamping device - Stepless speed programming - Stepless quill feed via three-phase servo motor - 2 T-slots 18 mm at the rear of the machine base frame - 2 T-slots 18 mm at the machine base on the left side - Thread cutting device - Central lubrication - Coolant device - machine light - CE marking - Protective device on the drill - USB interface Dimensions and travels Tool holder SK 40 column diameter mm 195 table dimension mm 1800 x 600 Number of T-slots 4 distance of T-slots mm 125 quill stroke (Z axis) mm 200 column stroke (W axis) mm 410 distance spindle lower edge - min mm 70 Table top edge - max mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 drilling radius mm 540 - 1590 Work table height mm 900 Machining values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency controlled kW 5,5 at 100 % ED. Speed range: min -1 15 - 2800 Hsyiprxr Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0,25 Y axis - AC - servo motor kW 0,25 Z axis - AC - servo motor kW 4,50 W axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 feeds stepless mm/min 5 - 2000 Accuracy positioning accuracy X-,Y-axis on 1200 mm mm ± 0,075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic power unit for clamping kW 0,75 Total connected load kVA 13,0 Weight Danumeric 440 (without packing) with table 1800 x 600 mm kg 2700 CNC - control axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, good readable from all sides well readable, 215 x 160 mm Position information: cartesian or polar, dimensions absolute or incremental, unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking & chip removal: possible with drilling cycle Hole patterns: hole line, hole circle, matrix Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selector functions for targeted entry Zero point determination: Cycles for the determination of zero points through manual probing the workpiece for: - any clamped rectangular parts - arbitrarily clamped round parts - Mediation of cast and flame-cut parts - Measuring the angular position of round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

more

Listing

Bächingen an der Brenz

1,404 km

Fast radial drilling machine

DONAU DR 28 Z

Call

Condition: good (used), Year of construction: 1988, drilling capacity: 28 mm in steel E335 Bnlsxfifwy Thread cutting: M 30 in steel spindle speeds: 45 - 2240 rpm Feed rate 5 pcs: 0.075; 0.15; 0.30; 0.45; rpm Work table: 500mm x 1200mm jib travel: 600mm Operating voltage: 400 V, 50 Hz 3 phases with neutral Control voltage: 24 V Thread cutting device Drilling spindle MK 3 Documentation Test report for mechanics and electrics delivery time 5 - 6 weeks

more

Listing

Bächingen an der Brenz

1,404 km