Carcase press

HOMAG CABTEQ S-250 / MPH 450/25/07

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll Njdpfjzx Ennox Abysdc iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nsdpoxwaz Hsfx Abyodc

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm Ndsdpfxot U Izpj Abysc - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts - serial number: 1377 - year 2007

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation. Ndjdpfx Abeym Nvtoyoc

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Ndjdpfxex Aqdce Abyjc Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, mileage: 120,150 km, power: 62 kW (84.30 HP), first registration: 04/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI is a reliable panel van, ideal for commercial use. Powered by a 2.0 TDI diesel engine, it meets the Euro 5 emissions standard and delivers an output of 62 kW (84 hp). Equipped with a manual transmission and a total mileage of 120,150 km, this vehicle proves to be economical, with a combined fuel consumption of 7.2 l/100 km. Ndodpfx Ajynti Tjbyoc This T5 features practical transport options, including two sliding doors (left and right) for easy access and a robust wooden floor in the load compartment. With a maximum payload of 2,800 kg, it is well-suited for various transport requirements. A green emissions sticker ensures unrestricted access to urban areas. The vehicle offers seating for three occupants and comes in the striking color "Ginster Yellow." The Transporter was first registered in April 2010 and had one previous owner. Flexible loading solutions are available and, upon request, a registration service can be arranged for an additional fee. The vehicle is in used but good condition and is only sold to trade customers or for export. Viewing is possible during business hours without prior appointment. Sale is only to commercial clients (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Condition: new, The Newpower Generator proudly presents their new NWK250 250kVA Soundproof Plus series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical specifications: Model: NWK250 Soundproof Plus backup generator Fawde Motor Newpower generator set with extra soundproofing Engine : Fawde CA6DL2-27D , 6 cylinder, water cooled Generator: Newpower NW/N80 Continuous power: 180 kW / 225 kVA Maximum power: 198 kW / 248 kVA Noise level (7m): 67 dB Connection: 1x5P 125A-,1x5P 63A-, 1x5P 32A-, 2x2P 16A Schuko sockets, FI protection circuit breaker- 5-wire cable Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 (new) Dimensions (LxWxH) : 3870X1380X2450 mm Weight: 3650 kg Ndedpfx Aenfva Isbyoc Diesel tank: 400 L. (possibility to connect to an external tank) 100% load l/h 41 75% load l/h 33 50% load l/h 21 additional costs 100A automatic switch: € 620 250A automatic transfer switch Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: like new (used), Year of construction: 2022, Demonstration Unit Year of Manufacture: 2022 Condition: Like new, 0 operating hours Features and Technical Specifications: - Sound-insulated, “Silent and SaveEnergy” - With automatic shutdown - 2 fans, speed controlled via inverter - Jet cleaning - Filter categories M and H3 - Filter area: 50 m² - Airflow: 6,927 m³/h - Negative pressure: 3,365 Pa - 4 collection containers - Motor: 2 x 5.5 kW - Total power consumption: 11 kW - PLC touchscreen control - Intake port: 350 mm - Weight: 1,160 kg - Dimensions: 3,900 x 1,620 x 2,660 mm Ndjdpfx Aszwqd Sebysc - Current list price: over €30,000 net, ex works

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 Nedpfx Abezk N Uioyodc Features and technical specifications: - Press length: max. 2,500 mm - Press height: max. 1,350 mm - Working depth: max. 600 mm - Pressing time: adjustable - The vertical and horizontal press beams are driven electromechanically and interlock with one another - Pressure is built up via frequency-controlled gear motors - Press pressure can be adjusted separately in the vertical and horizontal directions - Dimensions: approx. 370 x 100 x 225 cm - Weight: approx. 2,100 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Nodst N Ix Ropfx Abyedc Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)