Used briquetting presses for sale (89)

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Isdpsfmqq Eefx Alxsbb Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2025, Small hydraulic briquetting press. Main motor is 4 kW, briquette diameter is 50mm. Capacity of the press is 30-50 kg/hour. The machine is new, and has CE certificate. Customer can order it with oil cooler. For more information visit our YouTube channel, webpage or Facebook site. Ijdpfsfk N Tpjx Alxebb

Condition: new, Year of construction: 2026, Your advantages Stable pressing mechanism with a wear-resistant, chrome-plated die Press chamber wear bushing Ibodpfxecnz U Ej Alxjb Pre-compressor with end-position damping cylinder and screwed-on cover Control panel with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, small footprint: The machines in the C-series are particularly suitable for small and medium-sized businesses whose required throughput of 50-80 kg/h or 200 to 400 kg/day is not exceeded. Virtually any suitable material can be briquetted, such as wood, styrofoam, foam, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (material-dependent) Hydraulic motor (kW) 5.5 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the length of the briquette to a uniform size Press chamber wear bushing: Prevents wear in the press area Location: Ex works - free loading

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Ibedj E Dqujpfx Alxjb Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, Year of construction: 2026, Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated clamp Pre-compactor with end-position dampened cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Ibodpfxebtnf Es Alxob Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Ibjdpsd Db N Iofx Alxsb Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Ibodpfx Ajxfwdjlxob Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Technical data: Motor output power 100% ED 11 kW Ibedpfx Aljvrvfnsxsb Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically Isdpfx Alofci D Asxebb * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Ibsdsd Nnwljpfx Alxob Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: new, Year of construction: 2026, THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips produced in the wood processing industry. The briquetting process can generate additional revenue and reduce storage and transportation costs. Another advantage is the flexibility of our wood briquetting presses. You can press different material grains into high-quality briquettes without any binding agents. As a valuable source of energy, RUF briquettes therefore have a higher utility value and an optimum CO2 balance. Our LIGNUM series also shines thanks to the innovative RUF hydraulics with high energy efficiency and low wear. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design - Direct integration into existing production systems possible Ibjdpfxeq Rut Tj Alxeb - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquettes - Without binder - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM CLASSIC Max. throughput of wood (kg/h) 410 Motor power (kW) 30 Max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.1 x 1.9 x 2.0 Approx. weight (t) 3.3 t Availability/delivery time after consultation

Condition: new, Year of construction: 2026, BRIQUETTING WOOD CHIPS AND GENERATING MORE REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way - without the use of binding agents. The briquetting process allows you to achieve higher yields while reducing transportation and storage costs. Our robust wood briquetting presses from the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - More revenue for briquettes - Without binding agent - CO2 neutral fuel - Higher calorific values compared to logs - Space-saving storage due to rectangular format Technical data RUF LIGNUM R4 Max. throughput of wood (kg/h) 590 Ijdpfoq Ruvvox Alxebb Motor power (kW) 30 max. specific pressing pressure (kg/cm²) 1700 Briquette size (mm) 150x60 Dimensions (m) length x width x height 2.9 x 2.1 x 2.1 Approx. weight (t) 4.1 t Availability/delivery time after consultation

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Ibjdod Nm Sispfx Alxjb Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Ibsdjffh Atepfx Alxjb Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.