Bonding press

Orma LS/ECO/CA 30/13

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, Nwodjtvm Hdepfx Aghsp -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Nwsdew E Ei Ujpfx Aghop Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system Nwsdpfxowya Sye Aghep with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Njdpfjq Auhdex Aghswp Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 Njdpfxoqprk Te Aghjwp - Total connection: 45 kW

Condition: new, Year of construction: 2024, MULTIPLE RIP SAW ANGOMAC MAX DEPTH OF CUT 120 MM Max. width of cut 480 mm Max. passage width 600 mm Nwsdpfxeh Ia Upj Aghsp

Condition: new, Timber driers any capacity, own technology, more than 70 years experience. More than 500 machines all over the world. Machines for treatment ISMP-15. Njdek D S Npopfx Aghjwp

Condition: used, WRAVOR WRC 1050 AC – Power, Precision, and Reliability in Wood Processing Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. _____ Key Benefits: High Efficiency: Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. Precise Cutting: Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. Nwedpfx Agewfq Naohjp Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 30 m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today.

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Njdpfxepyg Itj Aghswp

Condition: good (used), Four side planer Weinig Unimat 23 Lamelling machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, Nodpfjpq T Rbsx Aghswp feed: 5,5 kW / 6 - 36 m/min, spindle arrangement: 1- Down ( 5,5 kW ) 2- Right ( 5,5 kW ) 3- Left ( 5,5 kW ) 4- Right ( 5,5 kW ) 5-Top (11 kW) 6-Bottom (5,5 kW) 7-Top (7,5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table