Edge banding machineBrand: IMAType: Combima/N/I/R80/760/VYear: 1993 Fix stop side left Top pressure with wide v-belt 1 Main stand equipped with: 1 Milling unit with motor 4,4 / 6,6 KW 50/100 Hz - 2860 / 5870 rpm. pneumatic adjustable swivable With manual adjustments, displayed via Siko counters - vertical, horizontal swivel 1 Milling unit with motor 4,4 / 6,6 KW 50/100 Hz - 2860 / 5870 rpm. pneumatic adjustable swivable With manual adjustment, displayed via Siko counters - vertical, horizonta...
Laminate trimmer long B600 to the concurrent RADIUS and flush milling for straight edges and inner and outer radii
Thank you, that you are interested in our offers. If you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.
Edge thickness of approx. 0,4-3, 0 mm
Workpiece thickness is approx. 16-55 mm, but to turn up the 80 mm
Inner radius min. 50 mm
Supply 230V/1kW
Speed infinitely variable approx. 4000 up to 18000 RPM
Suction connec...
sell SCM OLIMPIC M80T edge trimming machine
Oasn2ovf
ideal machine for flush milling on both sides / radius milling of shaped parts
edge thickness 0,5-3mm
Feed rate 2-10m/min.
table size 990x787mm
very well maintained condition
Dimensions 1200x1300x1300mm
Weight 245kg
IMA MEINERT Kantenbearbeitungsmaschine
Blytefqrib
CORNER COPIER
Ibr3sdqhg
Edge thickness: 3 mm / workpiece thickness: 45 * mm Power consumption: 0.5 kW /
Electrical connection: 400 V / 3 Ph / 50 Hz
Dimensions (LxWxH): 800 x 500 x 400 mm / weight 40 kg
PRICE IN REFURBISHED CONDITION -
The Lufthansa Technik offers a used edge nipper from SGM SCHUGOMA.
Bjfghuyfex
TRIMMING MACHINE Make: VITAP Type: RC 92 New machine Technical data:- 2 high frequency motors HP.0,75 (Kw 0.55) each. 12000 RPM, in vertical opposite position with inverter;- 2 cutter heads with cutters one knife straight 15° the other radius 3mm;- CE standards Options (available for a surcharge):- Couple of cutters (without knives)- Set 8 knives 15 degrees angle and radius 2 mms.- Set 8 knives 15 degrees angle and radius 3 mms.- Pneumatic lifting of the upper motor- Optional for panels max. ...
M.Nr. 450/9 - 203,
Built: 1992,
Engine data: 220 V - 50 Hz,
Workpiece thickness: max. 60 mm,
Compressed air approx. 7 bar,
1 pneumatic holder,
Schwabbel,
Footpedal
Weight approx. 120 kg,
Be3lu7dzeu
External dimensions: W/D/H approx. 800/650/1500 mm
Edge thickness 3 mm
Jbhulydgy
Workpiece height 50 mm
min. inner radius 40 mm
RADIUS milling station, Cap saw unit
workpiece dimensions min. 80x200mm
Minimum thickness 8 mm
max. thickness 40 mm
Copying path horizontal 10-50 mm
Lj7zwz8
Power of milling motor 220 V / 0,5 kW
Tool holder collet chuck 6 mm
possible edge processing: flush milling, chamfer milling, radius milling R2 to R5
Dimensions 740x760x1270 mm
Weight 95 kg
incl. chassis, cleaning station with buffing wheel, pneum. clamping device
Corner rounding machine Make: VITAP Type: ROUNDER New machine Technical datas:- For corner rounder and straight corners- Standard cutters 15° R2 mm or R3 mm;- Foot pedal to start the cycle;- Movable reference with mechanical digital readout;- Complete protection with safety microswitch;- CE standards Options:CUTTER R1 MMCUTTER R2 MMCUTTER R3 MM
Veimgjmnc
I sell the radius milling machine for curved shaped edges BIESSE Active Trim 120, year 2010. Condition like new.
Dzclss0ig
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sponsorship of Michael van Gerwen and TV advertising
10 valuable tricks for buying used machines online
New Machineseeker.com TV commercial with Michael van Gerwen
Photo gallery: the 10 strongest forklift trucks in the world
Photo gallery: The World's 10 biggest excavators
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Edgebanding machines
Dealer for Edgebanding machines
