Used Pendulum Impact for sale (1,505)

Condition: used, mileage: 446,000 km, power: 355 kW (482.67 HP), first registration: 10/2021, fuel type: diesel, overall weight: 26,000 kg, color: green, gearing type: automatic, Equipment: soot filter, Vehicle number: 263240 1st owner, accident-free, fully serviced according to maintenance schedule, non-smoking vehicle ---- ASSISTANCE SYSTEMS * Lane Change Warning System * Lane Change Warning System INTERIOR * Armrest on the driver's seat OTHER EQUIPMENT * ZF Intarder * ZF Intarder Additional features ----- Color / Paintwork ----- Cab color: Opal Green * Color of headlight bezel and bumper: Opal Green * Underside and sides of cab * Cab structure and fenders, Opal Green * Air intake, door handles, black * Chassis color, gray ----- Tires / Wheels ----- Steel disc wheels, silver-gray * Wheel trims without center piece, silver-gray (RAL 9006) * F1, 315/70R22.5MI XMZ 156/150 L Steering CB72-1 * R1, 315/70R22.5MI XMD 154/150 L Traction DC75-2 * R2, 315/70R22.5MI XLEZ2 156/150 L Steering AB72-1 * Spare wheel, not applicable ----- Equipment / Optional Equipment ----- Cab - Super Space Cab * Cab with air suspension * Driver's seat: Luxury Air * Passenger seat: Comfort Air * Upper sleeper bunk * Antennas: AM/FM, 2x mobile phone, GNSS Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Front: 8.00 t, air suspension, 161 N * Rear: 11.50 + 7.50 t, air suspension, SR1344 * MX-13 engine, 355 kW/483 hp, cab emblem: 480 * Emission class Euro 6 * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * Rear axle ratio 2.38 * Wheelbase 4.80 m / rear overhang 1.72 m * EAS unit on the right side * Aluminum fuel tanks 620+340 l, height 620 mm * Fuel tanks on the left and right * AdBlue tank 45 l, left chassis side * Vertical battery box, left * Technically approved GVW, max. 27000 kg * Max. total weight with drawbar coupling 53000 kg * Daytime running lights with four LEDs on each side, integrated into the headlight units * Skylights * Fog lights and turning lights function * Translucent sun visor outside in green above the windshield * LED headlights with impact-resistant Lexan lens glass * Central locking with exterior light check function * Black steering wheel with easy-grip surface * Color of interior trim, Dark Sand * Cab, interior trim, Delta black * Cooler box (42 l) with luxury handle in aluminum look under the sleeper bunk * Storage space under the lower sleeper bunk * Lower sleeper bunk with Xtra Comfort spring core mattress * Sleeping area with upper sleeper bunk with step. * Curtains along the windshield and side windows. * Automatic climate control * ECAS remote control * Digital (intelligent) tachograph VDO DTCO Dkjdpfxs Ah Nwnj Acyjw * Radio/USB player. Speaker system with 2 speakers. * Standard antennas: AM/FM radio frequencies, 2x mobile phone for mobile phones, GNSS for location purposes Extra: CB antenna. * Predictive Cruise Control * Axle load monitoring * Wheelbase 4.80 m / rear overhang 1.72 m. * LED work lights 2x * Vertical battery box on the left side. Without spare wheel holder * Wheel chocks 2x * Loose wiring harness with LED side marker lights * Preparation for body systems * Analog gearbox auxiliary drive control, no gearbox auxiliary drive * Generator 120 A, batteries 2 x 210 Ah AGM. * Battery energy monitoring * Standard tool set * Auxiliary heater Slim Cool 1400 Watt * Suitable for bodies with a stacking height of 1.32 m + 1.22 m * with attachment for a forklift * Steered trailing axle ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and

Condition: used, empty load weight: 5,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2016, loading space length: 7,430 mm, loading space width: 2,290 mm, loading space height: 1,430 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2016, mileage: 501,958 km, Equipment: ABS, Unladen weight: 5,440 kg, permissible total weight: 36,000 kg, cargo area (L W H): 7,430 mm x 2,290 mm x 1,430 mm. Tire size: 385/65 R22.5, cargo area volume: 24 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum flap (resting), roof roll tarp, platform, connection plug 1x15-pin and 2x7-pin, light alloy rims. You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer you individual financing solutions, full-service, and telematics services. We are happy to advise you. Dkedpfx Acsxu Rpcsysw

Condition: used, functionality: fully functional, Clamping fixture for SK 40 tools The metal plate bears the inscription Lorenz Ettlingen 7-191-020-0001. Used for securely clamping tool holders with SK40 during tool changes – tool mounting. For example, as an accessory for the Lorenz gear grinding machine – impact machine. Clamping vise / mounting table / mounting cube. Clamping device for secure fixation and mounting. Clamping tower – tool changing device. Suitable for the 4 pieces of SK 40 tool holders. Weight: 75 kg Dimensions: 80 x 60 x 60 Price: Negotiable Our asking price is €190 net, ex works, plus packaging costs. All technical specifications are subject to printing errors and inaccuracies. Dkedpfsyuwzmex Acyow We only sell to countries within the European Community.

Condition: used, Year of construction: 2007, machine/vehicle number: M251, Used Clean pack Filling Monoblock Completely Refurbished in 2016Introduction to the cleanpack MonoblockThe Clean pack filler, a filling monoblock with a 24/24/6 configuration for carbonated and still water, stands out for its reliability and high-performance capabilities. Additionally, this machine, refurbished completely in 2016 and unused since then, ensures optimal working condition.Performance and Operational Capacity of the Used filling monoblock Clean pack completely refurbished in 2016This monoblock’s operational capacity is remarkable; it produces 9000 pieces per hour for 330 ml bottles, demonstrating its versatility in handling various bottle sizes, ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height.Technical Features of the MonoblockAmong its key features, the presence of an aluminum cap and an effective rinsing system are noteworthy. Furthermore, the monoblock comes equipped with 24 grippers and utilizes a single treatment. Moreover, the filler incorporates 24 valves with an isobaric filling type and a fixed nozzle, while the capper features 6 heads for aluminum screw caps.The filling machine accommodates caps with dimensions of 28×16 mm. It supports bottle heights ranging from a minimum of 160 mm to a maximum of 350 mm. Furthermore, the machine works with both 330 ml and 750 ml bottles, and it also fills volumes up to 1000 ml, with a minimum capacity of 200 ml.Additionally, this model specifically fills round bottles. Clean Pack in Italy supplied the filler at the end of 2016, and technicians have since fully refurbished it with new spare parts to ensure optimal performance.Current Status and SafetyThis machine, currently stored in a warehouse, is ready for use and ensures safe operation. Additionally, manuals are included to facilitate easy operation and effective maintenance. Furthermore, the monoblock is equipped with integrated safety features and rotates counterclockwise for optimal operation.Benefits of Purchasing a Refurbished MonoblockPurchasing a used filling monoblock can provide advantages for companies seeking to reduce production costs without compromising quality. Moreover, the Clean pak completely refurbished in 2016 offers the opportunity to benefit from the performance of a high-quality machine at an affordable cost.Environmental Impact and SustainabilityChoosing a refurbished machine also means reducing the environmental impact associated with manufacturing new equipment. Reusing and refurbishing existing machinery contribute to waste reduction and resource optimization.Conclusion of the Used filling monoblock Clean pak completely refurbished in 2016In conclusion, the Clean pak monoblock, completely refurbished in 2016, is an excellent choice for companies seeking a reliable and cost-effective solution for their bottling needs. With its high-performance capabilities and impeccable condition, this machine stands out as an ideal solution to meet the production requirements of various beverages. Djdo Aifrbjpfx Acyokw

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Dkodpfx Aozvhkyjcyjw

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers to protect against chips and coolant. Spindle head slide: Dkjdpfxez Dvycs Acyow Cast iron design with hydraulic weight compensation, guided by combined roller/plain bearing guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head arbor 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool holder SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic changeover; speed 22–4,000 1/min. Feed drives: Digital AC individual drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control system / measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Optional: Heidenhain iTNC 530. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox / milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides / ball screws pulse central lubrication. Coolant: Internal / external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant / air changeover. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical, via 2 vertical ball screws with separate drives, measuring systems, and CNC axes. Working platform: Moves in the X direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free adjacent slots Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy class 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 positioning slots 22 H7; T-slot spacing 160 mm; centering bushing Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X=5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D touch probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety areas; manually adjustable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Painting: Machine / control cabinet RAL 7035, milling head / spindle head RAL 5021; DD structured paint, semi-gloss, oil and alkali resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on-site; adapter plates for chip / coolant return are not included. Coordinate information: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space length: 42,000 mm, loading space width: 24,200 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power mirror, seat heater, soot filter, trailer coupling, - All-wheel drive - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Leaf suspension - Differential lock - High beam - Catalytic converter - Automatic climate control - Air-suspended seats - Particulate filter - PTO - Radio/multimedia system - Reverse camera - Seat heating - Sun visor - Lane departure warning assistant - Stability control - Windshield Internal reference number for customer inquiries: 4-031 MAN TGM 18.320 4x4 BB WITH PAVIC 3-way Tipper Body AND PALFINGER CRANE Vehicle: MAN TGM 18.320 4X4 BB Truck-Mounted Crane Tipper Cab CC: the compact one (narrow, short, standard height) Wheelbase 3,875 mm Suspension leaf/leaf (also available as leaf/air on the leading axle) Drive 4x2 Tires front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 Total weight 18,000 kg Automatic transmission MAN TipMatic Diesel engine MAN D0836 LFLAP, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e Transmission feature: EfficientRoll Cruise control Differential lock on rear axle MEILLER axial pump 270/45 Tipper operation control in cab MAN EasyControl operation panel, 4 functions, operable from outside with door open Trailer coupling RINGFEDER Type 4040/G150B Brake connection 2-line at end of frame Sun visor in front of windshield Central locking with remote MAN Media System Navigation Advanced 7-inch Online traffic for navigation function Smartphone integration Heated and electrically adjustable wide-angle and rear mirrors Driver comfort seat air-suspended, with lumbar support, shoulder adjustment, and heating Height-adjustable driver’s seat belt 2 work lights on cab roof 2 halogen beacon lights on cab roof GSR equipment (reverse camera, turning assistant, tire pressure monitoring, etc.) Body: 3-way tipper body 4200x2420 mm, Manufacturer PAVIC Front wall height 800 mm Side wall height 600 mm 8 fully recessed lashing rings in platform floor (4 per side) Material: Hardox 450 Offset for horizontal mounting of the side wall with rubber pad (long goods transport) Dsdpfx Aey E Hx Rocyekw Springs as side wall lifting aid for easier opening and closing Tipper body galvanized and side walls, etc. completely painted with 2K truck paint in RAL9016 Subframe galvanized and painted in RAL 9011 Left and right side in one piece, can be opened pneumatically on both sides from the cab via air valve, all sides openable from below (pendulum), manual from top to bottom, removable center stanchions. Springs as side wall lifting aid for easier opening and closing Loader Crane: Palfinger PK 14.501 K SLD 5 PALFINGER SOLID TRUCK LOADER CRANE with KTL coating Hydraulic four-section extension – 11.7 m Lifting moment 142.4 kNm (14.5 mt) Slewing range 420° Electronic overload protection PALTRONIC incl. emergency stop and load display Operating hours counter with service interval display Scanreco radio remote control LOAD DISPLAY and overload PALTRONIC on remote control unit 5 selectable speeds Financing, as well as leasing or lease-purchase, is possible. This is a non-binding offer. Subject to prior sale, errors, and changes...

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum drop-side panels, foldable and removable, 3 central stake pockets for 80 x 80 stakes, removable stakes, 6 lashing eyes, outer frame with lashing points, reinforced transmission support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression at the rear, surcharge for 1,600 mm high front panel grille (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps with a load capacity of 9 tons per pair and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more details at: ! Dkjdpo Ad U Sqefx Acyow

Condition: used, empty load weight: 6,190 kg, axle configuration: 3 axles, first registration: 05/2020, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2020, mileage: 68,252 km, ref: F0929354 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15 + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting distance meter, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, Dodo Agcplspfx Acyskw * Floor: Plywood floor, * Insertion strip (aluminum): 30 VIN: WKESD00000929354 Tire size: 385-65 R22.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.04 m Internal height: 2.79 m

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 05/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 179,144 km, ref: F0847123 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15 + 2 x 7-pin, * ABS, Dkedpfe Agcpwex Acysw * EBS, * Side impact protection, * Lifting distance meter, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32 VIN: WKESD00000847123 Tire dimension: 385-65 R22.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.04 m Internal height: 2.79 m

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 06/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 175,140 km, ref: F0832749 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 31 VIN: WKESD00000832749 Tire size: 385-65 R22.5 Dkedpfxj Agcp Tj Acyew Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.04m Internal height: 2.79m

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 211,020 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Dksdpfxsz Ecbvj Acysw

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 212,500 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Dkjdpfxjz Eccao Acysw

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 221,120 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Dodpj Ahl H Rofx Acyskw

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 214,701 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Dkjdpfx Aj Ahl H Uecyew

Condition: new, empty load weight: 6,350 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,660 mm, loading space volume: 28 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2026, Equipment: ABS, Unladen weight: 6,350 kg, permissible total weight: 36,000 kg, cargo area (L x W x H): 7,480 mm x 2,354 mm x 1,660 mm. Tire size: 385/65 R22.5, cargo area volume: 28 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle at the front, electronic braking system (EBS), pendulum tailgate (resting), sliding roof, connection plug 1x15 and 2x7 pin, antispray, tire pressure monitoring system. You can find our complete range of vehicles at . Interested in financing? With our Value Added Services, we offer you customized financing options, full service, and telematics solutions. We are happy to advise you. Dksdpfj Ahl Icsx Acysw

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 227,023 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Dsdpo Ahl Ntjfx Acyjkw

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 210,314 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Dkodpo Ahl Nwjfx Acyow

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINUM chassis, Jost axle assemblies 22.5" / off-road, 3 axles with air suspension, 9 tons per axle, 1st axle lift with starting aid and electric operation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tires size 385 / 65 R22.5 on STEEL rims, 2" kingpin screwed into a 10 mm thick plate, mechanical design of the trailer supports with single-sided operation, braking system according to E.E.G. standard, dual-line Westinghouse system, spring accumulators acting on two axles, and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air tanks, electrical system according to STVZO with 2 five-chamber lights, type Aspöck, 24-volt system, aluminum tipper body, hydraulic system manufactured by Edbro with approximately 2 m of hydraulic hose, 6 PVC fenders with rubber mud flaps, side impact protection, underrun protection, walkway on the frame, fully welded, long-life rubber sealing, spindle locks on the rear door, preparation for a soil compactor, mud-tight! Dsdpfxeu Dvw Eo Acyokw FURTHER EQUIPMENT CAN ALSO BE ORDERED ACCORDING TO CUSTOMER REQUIREMENTS COLOR CAN BE FREELY CHOSEN +590¤ Delivery costs ?Images and offers are subject to change?

Condition: used, empty load weight: 5,940 kg, axle configuration: 3 axles, first registration: 03/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, Ref: F0866625 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin, * ABS, * EBS, * Side impact protection, * Access ladder, * Multi-lock system, * Floor: Plywood floor VIN: WKESD00000866625 Tire size: 385-65 R22.5 Interior length: 13.62m Width: 2.55m Interior width: 2.48m Height: 3.97m Dedpfx Acez S N Aujyskw Interior height: 1.2m

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced gearbox support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Dksdpfo Afcwkex Acyjw

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Dodpfxs Adzhro Acyskw Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: used, mileage: 110,685 km, power: 132 kW (179.47 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 5,880 kg, overall weight: 7,200 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, emission class: euro6, Equipment: ABS, air conditioning, cruise control, onboard computer, soot filter, Special features - 6-speed manual transmission - Electric windows - Radio - ABS / ASR - Differential lock - Air conditioning - Power steering - Central locking - Rear view camera - 6 new tires - New windscreen Superstructure Aerial work platform France Elevateur 172 CPL - Working height: 17.4 m - Maximum outreach: 10.3 m - Basket load: 265 kg / 2 persons 220V power outlet in the platform - Turret rotation: 400° - Maximum working inclination: 5% - Maximum tilt: 15% - Steel boom with 2 telescopic sections - Articulated jib with 180° pendulum motion - Cable duct integrated into the telescopic boom - Electrohydraulic and sequential controls - Remote control in cab - 4 hydraulic outriggers - Tilt alarm - Plastic work basket (1000 V insulation) - Priority electrohydraulic emergency controls - Road position return light in cab - Hour meter - Emergency pump - Sine wave inverter 2500VA - Basket dimensions: 1300 x 780 x 1150 mm The aerial work platform, mounted on a very stable 7.2-ton truck, is especially suitable for safe operation on telecommunications networks, public lighting maintenance, telecommunication lines, or facade work. This is an especially robust vehicle with numerous additional features and equipment. The platform from France Elevateur allows work at heights of up to 17.4 m and a lateral outreach of up to 10 m. A 220V socket in the work basket enables connection of various power tools such as drills, lamps, or measuring devices. The vehicle is equipped inside with a workshop setup including drawers, cupboard and workbench for secure storage of tools and small parts. All functions of the access platform have been checked in our workshop and are fully operational. The vehicle is ready for registration. Included in the price are German registration documents, TÜV inspection, and UVV safety inspection. Additional equipment such as a tow bar, lighting, shelving, and further options are available on request. The vehicle is now available at our location in Langenfeld. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles we offer are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations use only original photos taken at our own premises – thus we guarantee full transparency concerning the actual condition of the vehicle. Our vehicles undergo comprehensive preparation before sale in our own specialist workshop – including mechanics, bodywork and painting. Thus, they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, your vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service for you: Delivery of your vehicle to your desired location Complete processing of export formalities, including export license plates Individual financing and leasing offers Dodpfx Acjxwlr Rsyjkw Trade-in of your current vehicle Installation of special equipment on request

Condition: used, fuel type: gasoline, empty load weight: 199 kg, Year of construction: 2018, Honda Petrol Hand start. Weight: 199 kg Impact force: 30kn Plate width: 50cm Forward/reverse Price: €1.700,- ex. VAT Dkedpfx Acjxw H Hveysw Several in stock!!

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Djdpfxexw N N Hj Acyskw Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -