Used Ballas for sale (106)

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate delivery and short-term notice, on our website. Extract from the equipment list. Complete specification available upon request. Cargo Area: * Cargo area with approx. 30 mm thick hardwood floor Nedpexl Nf Rsfx Aghowp * 8 pairs of lashing rings foldable outwards (LC 10,000 daN) Landing Gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck takes place via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display these data. Axles and Suspension: * BPW axles, technical capacity per axle 10,000 kg * 1st and 3rd axles hydro-mechanically steered, mounted on turntable, 2nd axle fixed * Air suspension with lift/lower valve * Axle tool Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M) without interconnecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin ISO sockets * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned with shot blasting machine after welding * Second blasting with corundum for optimum coating adhesion * Final painting with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanised front connection rail * 4 wheel chocks with holder on the front wall * Storage for approx. 1,000 mm stake pockets in the central beam at the rear * At the gooseneck and rear panel, left and right, one bracket each for warning signs incl. socket * Yellow reflector tape according to EU regulations on the side and rear of the trailer * 10 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * European reflector boards (Red-Yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mudflap at the rear of the trailer * Manual and description on USB stick * 80 km/h speed stickers at the rear and on both sides * Electro-hydraulic power unit * 1 shunting coupling bolted with reinforcement to the end traverse * Axle load gauge to determine axle load including load diagram * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * Remote steering from front and rear via cable remote control with push buttons, with axle alignment control (without installation in the tractor unit) * 7 pairs of galvanised plug-in stanchions approx. 100 x 50 mm, approx. 1,000 mm high * 4 pairs of stake pocket rails, mounted transversely in the platform for plug-in stanchions approx. 100 x 50 mm * Spiral cable

Condition: used, empty load weight: 9,500 kg, maximum load weight: 50,500 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 08/1996, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 1,130 mm, loading space volume: 26 m³, total length: 9,300 mm, suspension: air, color: yellow, Year of construction: 1996, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40200 Goldhofer, TN-L6-50/80 * Year of manufacture: 1996 * ABS (Anti-lock Braking System) * Air suspension * Self-tracking steering axle * Air connection coupling heads (red & yellow) * Connection plug 2x 7-pin * Connection plug 15-pin * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 60,000 kg * Unladen weight: 9,500 kg * Payload: 50,500 kg * Permissible gross weight: 60,000 kg * Axle manufacturer: BPW * Internal dimensions: L = 9,300 mm, W = 2,550 mm, H = 1,130 mm * Internal volume*: 27 m² * Pallet spaces: 23 * Heavy-duty trailer * Platform height: approx. 1,130 mm * Axles 5 & 6 self-steering * Tire condition all around approx. 60% * Drawbar: 50 mm Njdpow U Nivofx Aghewp Disclaimer: Subject to change, prior sale, and errors. Find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained sales staff, we are happy to assist you.

Condition: excellent (used), axle configuration: > 3 axles, first registration: 06/2006, loading space length: 12,550 mm, loading space width: 2,550 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 425/65/22,5, color: yellow, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Lift axle Nsdpfx Ajw Elwxsghjwp - Air suspension = Further information = Axle configuration Tyre size: 425/65/22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 10,000 kg Rear axle 3: Max. axle load: 10,000 kg; Steering Rear axle 4: Max. axle load: 10,000 kg; Steering Rear axle 5: Max. axle load: 10,000 kg; Steering Weights Empty weight: 11,600 kg Payload: 62,400 kg Gross vehicle weight: 74,000 kg Functionality Loading platform height: 160 cm Condition Technical condition: very good Optical condition: very good ES-GE 5 BAL-74-NA BALLAST SEMI-TRAILER SAF AXLES 1ST AXLE LIFTABLE 3RD, 4TH AND 5TH AXLES STEERABLE TRIDEC STEERING SYSTEM WABCO SMART BOARD MAXIMUM PAYLOAD 62,400KG LOADING DECK LENGTH 1,255CM LOADING DECK HEIGHT 160CM FLOOR ANCHORS REMOVABLE STAKES FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), axle configuration: > 3 axles, first registration: 02/2007, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, total length: 13,230 mm, total width: 2,520 mm, total height: 2,600 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,970 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication = Notes = Very nice 2007 NOOTEBOOM OVB-73-04 4-axle BALLAST TRAILER, axles 2, 3, and 4 are hydraulically steered (including remote control with cable), BPW axles with drum brakes, hardwood floor, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing rings, central lubrication, 3" kingpin, air suspension, unladen weight: 11,400 kg, permitted gross weight: 71,400 kg, twin tires with 275/70 -R22.5 tyres (L: 11/8, 7/13, 12/12, 10/12 mm; R: 12/12, 13/12, 12/11, 12/6 mm), Belgian registration with valid technical inspection until 13.02.2026 Nwsdjxuu Ayjpfx Aghep = Further Information = Axle configuration Tyre size: 275/70-R22.5 Axle Make: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tyres; Max. axle load: 11,600 kg; Tyre tread left inside: 50%; Tyre tread left outside: 70%; Tyre tread right inside: 75%; Tyre tread right outside: 75% Rear axle 2: Dual tyres; Max. axle load: 11,600 kg; Steered; Tyre tread left inside: 45%; Tyre tread left outside: 80%; Tyre tread right inside: 75%; Tyre tread right outside: 80% Rear axle 3: Dual tyres; Max. axle load: 11,600 kg; Steered; Tyre tread left inside: 75%; Tyre tread left outside: 40%; Tyre tread right inside: 70%; Tyre tread right outside: 75% Rear axle 4: Dual tyres; Max. axle load: 11,600 kg; Steered; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 40%; Tyre tread right outside: 75% Weights Unladen weight: 11,460 kg Payload: 59,940 kg Gross vehicle weight: 71,400 kg Maintenance, History and Condition APK (periodic technical inspection): Valid until 02.2026 Technical condition: Very good Cosmetic condition: Very good Further information Please contact Arne Honingh or Piet Swank for more information.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1998, total width: 2,500 mm, total height: 1,550 mm, ROR axle(s), drum brake system, air suspension, support winch(s), trailer for mobile crane - counterweights/counterweights Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us! Nsdpfxsvnm Tho Aghjwp

Condition: used, mileage: 779,786 km, power: 480 kW (652.62 HP), first registration: 05/2007, fuel type: diesel, empty load weight: 7,500 kg, maximum load weight: 10,500 kg, overall weight: 28,000 kg, tire size: 315 / 60 R 22.5 / 11mm, axle configuration: 4x2, wheelbase: 3,500 mm, next inspection (TÜV): 04/2016, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 5,750 mm, total width: 25,500 mm, total height: 39,000 mm, front tire size: 315 / 60 R 22.5 / 11mm, number of seats: 2, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specifications available upon request. Chassis: * Frame construction made of welded longitudinal beams and inserted cross beams * Underrun bar width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch king pin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside * Technical saddle load 26,500 kg Landing Gear: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension system with 10 t load capacity each * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Bracket for lifting and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter on bracket for lifting and lowering, in addition to the lift/lower valve * Without battery (operable only with towing vehicle) * Bracket for lights and brakes at the front of the underrun bar, total height approx. 700 mm * Basic version of tire pressure monitoring, connected to the EBS CAN bus system * With dual-release valve for brake and spring actuator * Test nipple for brake cylinder pressure at the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device mounted at the rear left (in the direction of travel) * EBS brake system by Wabco * EBS diagnostics via CAN bus (EBS plug), no external diagnostic cable provided! Tyres: * 8 x 445/65 R 22.5 - brand of our choice * Hub centering Lubrication: * Grease nipple strips on bogies and at the front of the steering system * No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rearwards), switch on lift/lower bracket * Heavy-duty front wall for platform * Side contour marking in yellow, rear in yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: Nedpfx Aswx Dctsghswp * 2x LED work lights mounted in the lamp plate, switched via reverse gear * 2x LED work lights, switched via reverse gear, 1 each side near landing gear * 2x LED reversing lights, 1 per side in front of 1st axle * Lighting/wiring system brand of our choice * License plate illumination * The towing vehicle must provide sufficient power for the selected lighting (esp. reverse light) * Front position lights, lower, white, 1 each right and left (LED) * 24 Volt lighting system with large multifunctional lamp * Side marker lights (LED) flashing * 1 x 15-pin and 2 x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane departure lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL 3002 flame red * Front wall (steel construction) painted in RAL 3002 flame red * Axle hubs in chassis color * Axles and landing gear in black * Wheels in aluminum/silver, similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side. Lashing load max. 3,000 daN * 12 per side

Condition: used, empty load weight: 7,800 kg, maximum load weight: 42,200 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/1995, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 1,750 mm, loading space volume: 35 m³, total length: 8,000 mm, suspension: steel, color: yellow, Year of construction: 1995, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40199 Goldhofer, TN-L6-50/80 * Year of manufacture: 1995 * ABS (Anti-lock Braking System) * Self-tracking (rear-steering) axle * Air connection coupling head (red + yellow) * Connector plug 2x7-pin Nedew U Nipjpfx Aghewp * Connector plug 15-pin * Lifting and lowering mechanism * Heavy-duty lashing eyes * Suspension: leaf springs * Gross weight: 50,000 kg * Unladen weight: 7,800 kg * Payload: 42,200 kg * Authorized gross weight: 50,000 kg * Axle manufacturer: BPW * Internal dimensions: L=8000 mm, W=2500 mm, H=1750 mm * Internal volume*: 35 m³ * Pallet spaces: 20 * Goldhofer 5-40/62 2+3 * Platform height: approx. 1170 mm * Tyres all round approx. 40% * Towing eye 50 mm Disclaimer: Subject to alterations, prior sale and errors excepted. More photos and videos can be found on our homepage. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Assistance with all (export) documentation * Procurement of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists—we are happy to advise you.

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2022, loading space length: 11,060 mm, loading space width: 2,480 mm, loading space height: 1,500 mm, total length: 113,500 mm, total width: 2,480 mm, total height: 1,500 mm, suspension: air, tire size: 385/65/22.5, color: red, Year of construction: 2022, Equipment: ABS, = Additional options and equipment = Njdpfov I R N Tex Aghewp - Air suspension - Central lubrication = Further information = Axle configuration Tyre size: 385/65/22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Max. axle load: 10,000 kg; Steerable Rear axle 3: Max. axle load: 10,000 kg; Steerable Weights Empty weight: 8,370 kg Payload: 39,630 kg Gross vehicle weight (GVW): 48,000 kg Functional Platform height: 150 cm Condition Technical condition: very good Visual condition: very good NOOTEBOOM OVB-48-03 3-AXLE LOW-BED SEMI-TRAILER AIR SUSPENSION SAF AXLES 2ND AND 3RD AXLE WITH ELECTROHYDRAULIC ADDITIONAL STEERING REMOTE CONTROL CENTRAL LUBRICATION L=1106CM W=250CM 34 x FLOOR ANCHORS 20 x STAKE POCKETS

Condition: good (used), axle configuration: > 3 axles, first registration: 03/2007, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, total length: 13,230 mm, total width: 2,520 mm, total height: 2,600 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,970 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and equipment = - BPW axles - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication system = Remarks = Very nice 2007 NOOTEBOOM OVB-73-04 4-axle ballast semi-trailer, axles 2, 3, and 4 are hydraulically steered (including wired remote control), BPW axles with drum brakes, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing eyes, central lubrication system, 3" kingpin, air suspension, curb weight: 11,620 kg, permissible gross weight: 71,400 kg, twin wheels with 275/70 -R22.5 tyres (left: 10/13, 13/13, 14/14, 7/7mm; right: 10/7, 14/14, 13/12, 11/12mm), Belgian registration with valid technical inspection until 25/03/2026. = Further information = Axle configuration Nwodpoxuu Aaefx Aghsp Tyre size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tyres; max. axle load: 11,600 kg; tyre tread left inner: 65%; tyre tread left outer: 80%; tyre tread right inner: 65%; tyre tread right outer: 45% Rear axle 2: twin tyres; max. axle load: 11,600 kg; steered; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 90%; tyre tread right outer: 90% Rear axle 3: twin tyres; max. axle load: 11,600 kg; steered; tyre tread left inner: 90%; tyre tread left outer: 90%; tyre tread right inner: 75%; tyre tread right outer: 80% Rear axle 4: twin tyres; max. axle load: 11,600 kg; steered; tyre tread left inner: 45%; tyre tread left outer: 45%; tyre tread right inner: 70%; tyre tread right outer: 75% Weights Curb weight: 11,620 kg Payload: 59,780 kg Gross vehicle weight: 71,400 kg Maintenance, history and condition APK (main technical inspection): valid until 03/2026 Technical condition: very good Visual condition: average For more information Please contact Arne Honingh or Piet Swank for further information.

Condition: used, maximum load weight: 13,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2008, loading space length: 3,700 mm, loading space width: 2,420 mm, loading space height: 200 mm, Equipment: ABS, BALLAST TRAILER, weight holder, drop sides, steel chequer plate floor, 50 mm towing eye, 'haacon' landing gear, ABS, EBS, BPW EcoPlus axle(s), drum brake system, air suspension. The vehicle may be fitted with advertising stickers and/or inscriptions. Nwsdpjwzfzcsfx Aghep Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be fitted with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: excellent (used), axle configuration: > 3 axles, first registration: 11/2010, Year of construction: 2010, Rear axle 1: Lift axle; Steered; Tire profile left: 70%; Tire profile right: 70% Nsdpfx Asw I T Szjghswp Rear axle 2: Lift axle; Tire profile left: 70%; Tire profile right: 70% Rear axle 3: Tire profile left: 70%; Tire profile right: 70% Rear axle 4: Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle 5: Lift axle; Steered; Tire profile left: 70%; Tire profile right: 70% Technical condition: very good Visual condition: very good Contact John de Koning for more information.

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Nwjdpfxjwx Dcae Aghsp The following is an extract from the specification. Complete specification available on request. Chassis: - Welded construction made of high-quality steel profiles with through-go crossmembers, designed for high point loads - Outer frame made of UNP steel Coupling equipment / fifth-wheel load: - 2-inch kingpin - Technically permissible fifth-wheel load: 26,500 kg Underrun protection: - According to EU regulations, bolted design Side impact protection: - According to EU regulations Landing legs: - Landing legs with single-side operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: - 5 x 10 t air suspension axle units, make: SAF, with drum brakes approx. 400 x 200 mm - ABS - Wheel attachment, center-bored, 10-hole, offset ET 0 - Total air suspension stroke: approx. 200 mm, lift approx. 140 mm, lowering approx. 60 mm; control via rotary valve with detent function Steering: - 1 axle with leading steering, 2nd axle rigid, 3rd, 4th, and 5th axle with mechanical forced steering (Tridec) - Greasing points are routed centrally to the outside Axle lift: - First and second axle automatically liftable, with additional cut-off at the chassis Brake system: - Two-line pneumatic brake system according to EU regulations with EBS and RSS, automatic load-dependent control, make: Wabco 4S/3M - Spring-actuated cylinders as parking brake - Interlocked coupling heads mounted securely on the front crossmember, no connecting line to the towing vehicle - Aluminum air tank Tyres: - 10 x 445/65 R22.5 164J on rim 11.75 x 22.5 ET 0 – brand of our choice TPMS: - Tire pressure monitoring system - TPMS according to ECE R141, with data transmission to towing vehicle Fenders: - According to EU regulations: 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with 1/4 PVC fender - Rear fender with mud flaps Load securing: - 5 pairs of folding lashing rings, evenly distributed (pulling force approx. 14 t) - 11 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) - 10 pairs of lashing rings in the side outer frame, evenly distributed (pulling force approx. 8 t) Stake pockets: - 10 pairs of stake pockets set into the outer frame - 6 pairs of stake pockets set into the floor (at the outer longitudinal beam) Removable stakes: - 16 pieces galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: - One magazine per side in front of the front wall, each for 8 plug-in stakes approx. 80/80 mm Front wall: - Bolted corner stakes filled with aluminum hollow profiles, inside with a steel collision plate across the entire width and height Floor: - Approx. 28 mm Z hardwood flooring, let into the outer frame, flush-mounted Lighting system: - According to EU regulations, 24 V with multi-chamber lamps - LED side marker lamps - LED position lamps white front - LED outline marker lamps rear - License plate lamps - 1x15 and 2x7-pin plug connections on the front crossmember Equipment: - Wheel chocks with double holder - Warning sign in accordance with ECE 70 - Work spotlight on lamp mounting (activated via reverse gear) - Holder for rotating beacon at the rear (incl. rotating beacon) - 1 piece climbing ladder mounted rigidly on each side left and right, incl. removable climbing aid - Smart Board - Sticker indicating vehicle swing-out - Sticker indicating load cen

Condition: used, empty load weight: 1,950 kg, maximum load weight: 8,050 kg, overall weight: 10,000 kg, axle configuration: 1 axle, first registration: 01/1998, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, loading space volume: 9 m³, total length: 3,000 mm, suspension: steel, tire size: 385/65 22,5, tire condition: 50 %, color: green, Year of construction: 1998, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40323 Goldhofer, Ballast * Year of manufacture: 1998 * ABS (Anti-lock Braking System) * Air connection with coupling heads (red + yellow) * Double 7-pin connector * Suspension: leaf springs * Gross vehicle weight: 10,000 kg * Unladen weight: 1,950 kg * Payload: 8,050 kg * Permissible total weight: 10,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% / 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=3,000 mm, W=2,500 mm, H=1,300 mm * Internal volume: 10 m³ * Pallet positions: — * Manufacturer: Obermaier TFB 100 Disclaimer: Subject to change, prior sale, and errors. Nwodpfx Agjxv Rtwshop More pictures and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, graphics, coatings, etc. * Professional loading and load securing * TÜV inspections, registration service * Transport of commercial vehicles Contact our trained specialists — we are happy to advise you.

Condition: excellent (used), mileage: 398,000 km, power: 441 kW (599.59 HP), first registration: 08/2010, fuel type: diesel, color: beige, axle configuration: 8x6, tire size: 385/65R22,5, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2010, = Additional Options and Equipment = - Leaf suspension - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Toolbox - PTO (Power Take-Off) = Notes = Transmission: Manual transmission Number of gears: 16 Transmission model: ZT 440 Torque converter Color: Red Payload capacity: 375,000 kg Manufacturer: Mercedes Benz Model: Actros MP 3 / 4160 8x4 SLT VIN: WDB9301821L470692 First registered: 19-08-2010 Odometer: Approx. 398,000 km Engine: V8 / 600 HP / Euro 5 Transmission: Manual ZF Transmission / Low – High Range + Split 16 Gear with Clutch Pedal 8x6x4 Axle 1: Steel suspension / 9,000 kg / Tyres 385/65R22.5 Axle 2: Air suspension / 8,000 kg / Tyres 385/65R22.5 Axle 3: Steel suspension / 13,000 kg / Hub reduction / Tyres 315/80R22.5 Axle 4: Steel suspension / 13,000 kg / Hub reduction / Tyres 315/80R22.5 GVW: 41,000 kg GCW: 5th Wheel Application / 250,000 kg Drawbar Application / 375,000 kg Additional information: - Front push coupling - Rear Rockinger RO56E coupling - Jost JSK 38 fifth wheel mounted on sliding frame - Toolboxes fitted behind the cab - ZF retarder Nwsdpfxeuu Hb Is Aghsp - ZF 440 torque converter - PTO + hydraulic pump - Counterweight box loaded with 15 tons of steel for extra rear axle load - Tractor fuel tank volume: 1,000 liters = Further Information = Driveline Fuel tank: 1,000 liters Transmission Transmission: Manual ZF Transmission / Low – High Range + Split 16 Gear with Clutch Pedal, 16 gears, manual transmission Axle Configuration Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Rear axle 1: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Reduction: planetary axles; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 13,000 kg; Reduction: planetary axles; Suspension: leaf spring Rear axle 3: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 13,000 kg; Reduction: planetary axles; Suspension: leaf spring Dimensions Width: 255 cm Weights Unladen weight: 15,920 kg Payload: 250,000 kg Gross vehicle weight: 41,000 kg Condition Technical condition: very good Optical condition: very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: new, Reglaj Attachment( Ballast Leveling Bucket) Designed to improve sub-rail stability, our Reglaj Attachment is used for ballast leveling operations. For more detailed information, please feel free to contact us. Nedpfx Ajv Spfzeghswp

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. Nodpoq Nxrxofx Aghewp 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine Nsdpfx Agsxttc Ajhswp * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: used, empty load weight: 3,400 kg, maximum load weight: 15,300 kg, overall weight: 18,700 kg, axle configuration: 2 axles, first registration: 02/2006, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, loading space volume: 9 m³, total length: 3,000 mm, tire size: 385/65 22,5, tire condition: 60 %, color: red, Year of construction: 2006, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40205 Goldhofer, Ballast • Year of manufacture: 2006 • ABS, Anti-lock Braking System • Air connection coupling heads (red + yellow) • Electrical connectors: 2 x 7-pin plugs • Gross weight: 18,700 kg • Unladen weight: 3,400 kg • Payload capacity: 15,300 kg • Permissible total weight: 18,700 kg • Tyre condition, axle 1: 50% – 50% — Tyre size: 385/65 R22.5 • Tyre condition, axle 2: 60% – 80% — Tyre size: 385/65 R22.5 • Tyre sizes: 385/65 R22.5 • Internal dimensions: L = 3,000 mm, W = 2,500 mm, H = 1,300 mm • Internal volume*: 10 m³ • Pallet spaces: • Goldhofer • TX2-15/80 Disclaimer: Specifications subject to change; intermediate sale and errors excepted. More photos and videos available on our website. Our comprehensive service portfolio includes, for example: • Purchase / sale / rental of commercial vehicles Nwjdpfx Asxatwgjghjp • Fast, straightforward financing • Assistance with all (export) documentation • Ordering of export / customs number plates • Vehicle preparation: new tarpaulins, branding, painting, etc. • Professional loading / load securing • TÜV approvals, registration service • Transfer / delivery of commercial vehicles Consult our trained professionals — we are pleased to advise you.

Condition: new, maximum load weight: 61,050 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment list available upon request. Loading Platform: * Loading platform with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technically rated at 12,000 kg each * 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169K – manufacturer of our choice TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to process and display this data Brake System: * Wabco brake system as per EU regulations with EBS-E (4S/3M) without connecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations * Lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically blasted after welding using a shot-blasting machine * Second blasting with corundum for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint finish not possible Including the following accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection rail * Storage for approx. 1,000 mm long insertable stanchions in the rear central beam * At the gooseneck and rear plate, left and right, one bracket each for warning signs including socket * Remote steering from front and rear via cable remote control with push-buttons, with single-track monitoring of the axles (no installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stanchion pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading status * 7 pairs of galvanized insertable stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stanchion pocket strips mounted on the loading platform for stanchions approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading platform, for 1x10' * 1 shunting coupling with reinforcement bolted to the rear crossmember * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 Nsdpfjw Tpr Uox Aghewp

Condition: used, empty load weight: 3,160 kg, maximum load weight: 14,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2001, tire size: 385/55 22,5, tire condition: 60 %, color: black, Year of construction: 2001, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40207 Hueffermann, HTA1800 * Year of manufacture: 2001 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Air connection coupling head (red & yellow) * 15-pin connection plug * Lifting and lowering device Nodpfxsxatwtj Aghowp * Heavy-duty lashing eyes * Gross vehicle weight: 18,000 kg * Unladen weight: 3,160 kg * Payload: 14,840 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60% -- 60% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 60% -- 60% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Manufacturer: Hüffermann Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Handling all (export) documentation * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained professionals—we will be happy to advise you.

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members Nwjdpfowx Dbpex Aghep - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: used, empty load weight: 3,460 kg, maximum load weight: 14,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2008, tire size: 385/55 22,5, tire condition: 40 %, color: black, Year of construction: 2008, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40208 Hueffermann, HTA1800 * Year of manufacture: 2008 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension Nwedpfx Agjxatwyshsp * Duomatic air connection * 15-pin connector plug * Lift and lowering device * Gross weight: 18,000 kg * Unladen weight: 3,460 kg * Payload: 14,540 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 40% -- 40% - Tire size: 385/55 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 Disclaimer: Specifications subject to change, prior sale, and errors excepted. Further photos and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Arranging all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TüV inspections, registration service * Transfer / delivery of commercial vehicles Consult our trained specialist staff — we will be happy to advise you.

Condition: used, empty load weight: 7,800 kg, maximum load weight: 42,200 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/1995, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 1,750 mm, loading space volume: 35 m³, total length: 8,000 mm, suspension: steel, color: yellow, Year of construction: 1995, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 401991 Goldhofer, TN-L6-50/80 * Year of manufacture: 1995 * ABS (Anti-lock Braking System) * Self-tracking steering axle * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Leaf spring * Gross vehicle weight: 50,000 kg * Unladen weight: 7,800 kg * Payload capacity: 42,200 kg * Permissible total weight: 50,000 kg * Axle manufacturer: BPW * Internal dimensions: L=8,000 mm, W=2,500 mm, H=1,750 mm * Internal volume*: 35 m³ * Pallet spaces: 20 * Goldhofer 5-40/62 2+3 * Platform height: approx. 1,170 mm * Tyre condition all round approx. 40% * Drawbar 50 mm Liability disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Processing of all (export) documentation * Ordering of export licence plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer/transport of commercial vehicles Please contact our trained staff—we will be happy to advise you. Njdpfsw U Nkgsx Aghjwp

Condition: used, empty load weight: 9,500 kg, maximum load weight: 50,500 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 08/1996, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 1,130 mm, loading space volume: 26 m³, total length: 9,300 mm, suspension: air, color: yellow, Year of construction: 1996, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 402001 Goldhofer, TN-L6-50/80 * Year of manufacture: 1996 * ABS (Anti-lock Braking System) * Air suspension Nedpfx Agsw U Nkmehjwp * Self-tracking steering axle * Air connection coupling head (red/yellow) * 2x 7-pin electrical connector * 15-pin electrical connector * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 60,000 kg * Unladen weight: 9,500 kg * Payload: 50,500 kg * Permissible gross weight: 60,000 kg * Axle manufacturer: BPW * Internal dimensions: L = 9,300 mm, W = 2,550 mm, H = 1,130 mm * Internal volume*: 27 m² * Pallet spaces: 23 * Heavy-duty trailer * Platform height: approx. 1,130 mm * Axles 5 + 6 with self-tracking steering * Tires approx. 60% tread remaining all round * 50 mm towing eye Disclaimer: Subject to prior sale, changes, and errors excepted. More photos and videos available on our website. Our extensive services include, for example: * Purchase, sale, and rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documents * Ordering of export/transit license plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transfer of commercial vehicles Please contact our trained team – we are happy to advise you.