Used Bhx 050 for sale (5,101)

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Guodpfewuclxex Aacjh Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: excellent (used), Year of construction: 2018, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 0-250-95-7962, workpiece height (max.): 850 mm, workpiece length (max.): 2,500 mm, power: 11.5 kW (15.64 HP), compressed air connection: 7 bar, Machine is excellent working order with no faults. Can be seen working and test it your self. It has low hours, picture will be added soon. Located in Nort East London. Can be shipped anywhere in Europe. Please ask if you need any more info. Godpfstwfv Rsx Aacouh

Condition: used, Gearboxes, angle gears, worm gears, Godpfx Aet Iyu Isacjuh -Manufacturer: Motovario, gearbox type NMRV / 050 -Translation: i 030.0 -Hollow shaft: Ø 25 x 90 mm / Ø 14 x 32 mm -Dimensions: 140/160/H190 mm -Weight: 3.7 kg

Condition: used, Shell end mills, shell cutters, milling cutters, indexable inserts -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg Guodpfx Aeb A R E Uoacoh

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. Gsdefv Axfepfx Aacouh

Condition: new, Indramat TDM 1.2-050-300-W1-220 Controller SN, unused in opened original packaging, 100% functional, scope of delivery as per photos Gsdpsi Ebnkefx Aacjuh

Condition: used, Year of construction: 2025, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW Gusdpfjxabu Hex Aacjh weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: excellent (used), Year of construction: 2015, Weeke BHX 200 Year of manufacture: 2015 Split-head machine Main features: Working area X: 200 – 3050 mm Working area Y: 70 – 850 mm Working area Z: 12 – 60 mm, special workpiece thickness: 8 mm Split-head drilling unit, 36 drilling spindles Vertical drilling spindles: 20 pcs (2×10) Horizontal drilling spindles in X: 12 pcs (2×6) Horizontal drilling spindles in Y: 4 pcs (2×2) Grooving saw, tiltable 90° in x/y direction Milling spindle: 9 kW; 1,250 – 24,000 rpm 4-position tool changer Workpiece clamping system Control: POWERCONTROL PC86 powerTouch with 17" TFT flat screen, operating system Windows XP WoodWop incl. MDE and production list software Godpfoxal Uqex Aacouh Delivery includes only all tools and HSK holders shown!

Condition: like new (used), Year of construction: 2018, operating hours: 687 h, machine/vehicle number: 0-250-78-0124, with 4-position pick-up tool changer Gedpfoxbq S Rox Aaceuh Outfitting V 13 HIGH SPEED DRILLING UNIT incl. quick-change system and spindle clamp HORIZONTAL DRILLING UNIT WITH 4 SPINDLES X-AXIS HORIZONTAL DRILLING UNIT WITH 2 SPINDLES Y-AXIS GROOVE SAW X-AXIS 10 KW TOOL-CHANGE SPINDLE INCL. INVERTER 4-POSITION PICK-UP CHANGER PLAUSIBILITY CHECK (X/Y) POWERCONTROL PC86 POWERTOUCH

Condition: used, Year of construction: 2015, functionality: fully functional, The heating/cooling unit from Carrier, type 30WG-050--0117-PE, is for sale; 2 units are in stock. Refrigerant: R410a Cooling capacity: 22 kW Gsdpfxjxakvae Aacouh Connected load: 36 kW

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TAG050/HE-BIO-FSH - 2200415896, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,253 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 18.9 m³/h, pump pressure: 1.18 bar, total width: 1,110 mm, total length: 3,407 mm, total height: 2,155 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Air Cooler/ Chiller/ Air-Cooled Water Chiller, Type: Taurus TAG 050/HE-BIO-FSH Manufacturer: MTA S.p.A. Gedew Tbqvopfx Aacouh The Taurus TAG 050/HE-BIO-FSH are compact water chiller units, suitable for outdoor installation, including a hydronic kit (200 l tank + pump), designed for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Cooling capacity: 111 kW Chilled water outlet/inlet temperature: 7 / 12°C Flow rate: 18.9 m³/h Available pump pressure: 1.18 bar Ambient temperature: 32°C Refrigerant: R 454B Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input: 51 kW Max current: 85 A Starting current circuit: 302 A Protection class: IP54 Dimensions: Length: 3407 mm, Width: 1110 mm, Height: 2155 mm Weight: 1253 kg Connection: Rp 2 1/2" Serial no.: 2200415896 Year of manufacture: 2024 Condition: Visual grade 1, technically OK Stock unit, as new (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: ready for operation (used), KUKA KS5CC-YYY-050 AC servo motor E Stand B SN:98F19797 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Gedpsi D I A Iofx Aacsuh

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-050 - - - Working width: 950 mm 1st unit: steel roller Guedpfx Aexivb Hjaceh 2nd combined unit: roller/pad Motor power: 11 kW

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 10900 € 209.28 € 60 mm 595 mm 363 mm 900 mm 130 kg 10.5 cm³ 60 x 3 mm 2"Gas x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 4 mm 60 x 4 mm 64 x 4 mm 64 x 4 mm 60 x 4 mm 50 x 4 mm 35 mm 60x30x4 stehend, 60x40x5 mm 300 mm 10 mm 10 mm 1,25 / 2,50 U/min 1.5 kW digital read out for bending angle Guodpfx Aaowirxkjceh manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included

Condition: like new (used), Year of construction: 2021, For sell Full automatic line for edge banding with loader, edgebander, robots for handling and drilling machine Edgebander specification: HOMAG EDGETEQ S-500 Profi KAR 375/20/V25/WZ edge bander Year of manufacture 2021 Continuous feed 16 – 25 m/min Workpiece thickness 12 – 60 mm Workpiece feeding system WZ10 fully automatic Workpiece length approx. 240 – 2500 mm Workpiece width approx. 120 – 1200 mm Release agent spray unit Jointing and trimming unit S2 with 2 motors, each 3 kW Gluing unit PUR with QA/PU adhesive application Edge magazine 24-position automatic Edge thickness approx. 0.3 – 3 mm Automatic and continuously variable edge clamp Pressure zone A with approx. 5 rollers Cross-cut saw unit PK25 with 2 motors, each 0.8 kW Pre-trimming unit BF10 with 2 motors, each 0.55 kW Profile trimming unit PF21 Flextrim with 2 motors, each 0.4 KW Form milling unit FK30/V20 with a maximum speed of 20 cycles/min Flextrim trimming unit, motor 0.7 KW and servo drive Multi-profile scraper MN21 automatic with triple tracing Flat scraper FA20 Buffing unit FP10 Standard trimming unit SF21 with a 5 KW motor For grooving and rebating Continuously adjustable vertical and horizontal axis Power Control PC 23 Powertouch control system Flexible edge tracking control and setup in the gap Specification of all the line: MUTZ Portal loading Year of manufacture 2022 Gantry with vacuum loading 3 pallet positions Feed roller conveyor WANDRES Una H-X 321 Surface cleaning Year of manufacture 2021 Brush top/bottom HOMAG RKT 100 Feeding K Feed roller conveyor Year of manufacture 2021 KUKA KR 140 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 140 kg Maximum reach approx. 3195 mm Vacuum traverse HOMAG RKT 100 outfeed roller conveyor with circulation system Year of manufacture 2021 KUKA KR 140 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 140 kg Maximum reach approx. 3195 mm Vacuum traverse Stacking station for pallets or circulation system HOMAG RKT 100 Buffer and sorting compartment system with circulation system Year of manufacture 2022 Buffer high-bay racking system Roller conveyors Robot removal roller conveyor for the racking system Racking system Circulation system KUKA KR 180 R3200-2K/FLR Robot with approx. 4 axes Year of manufacture 2021 Maximum load capacity approx. 180 kg Maximum reach approx. 3505 mm Plate gripper Gedoxf Tvtopfx Aaceuh HOMAG DRILLTEQ H-600 Optimat BHX 500 CNC-controlled drilling machining center with circulation system Year of manufacture 2021 Workpiece length approx. 200 – 3100 mm Workpiece width approx. 70 – 1000 mm Longitudinal feed table with automatic workpiece feed Drilling head vertical top/bottom with each approx. 42 spindles Drilling head horizontal top/bottom with each approx. 8 spindles in X direction Drilling head horizontal top/bottom with each approx. 2 spindles in Y-direction Grooving saw unit top/bottom pivots 90° Milling spindle ETP top/bottom with each approx. 6 kW Speed 6.000 – 18.000 U/min Power Control PC86 Powertouch WoodWOP 7.2 HOMAG RKT 100 Stacking system Year of manufacture 2022 Roller conveyors WANDRES Una X 121 surface brush Outfeed roller conveyor KUKA KR 180 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 180 kg Maximum reach approx. 3195 mm Vacuum traverse Layouts

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Godpfx Aovz A E Tjacsuh

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Gusdpfxewuckhj Aacjh Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: new, Indramat TDM 1.2-050-300-W1 / S0102 Controller, SN:232252-768198-003, unused in opened original packaging, 100% functional, scope of delivery as per photos Gedpfx Asi Ebm Heacsuh

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022128, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gujdpfxji Ebncs Aacsh

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022133, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Guedpsi Ebngsfx Aaceh

Condition: new, Indramat TDM 1.3-050-300-W1-000 Controller SN:245687-03354, unused in opened original packaging, 100% functional, scope of delivery as per photos Gedpoi Ebpaofx Aacouh

Condition: ready for operation (used), KUKA KS5CC-YYY-050 AC servo motor E Stand B SN:98F19816 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Gjdpfxei D I A Ss Aacsuh

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022000, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Godei Ebm Rjpfx Aacsuh

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022086, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Guodpfx Aaei Ebm Ujcjh

Condition: ready for operation (used), Indramat KDS 1.1-050-300-W1-220 A.C. Servo Controller, used, good condition, 100% functional Gedpfx Aaow Rkdtecouh