Used Pendulum Impact for sale (1,505)

Condition: used, empty load weight: 6,270 kg, axle configuration: 3 axles, first registration: 08/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 197,196 km, ref: F0847122 Equipment: * Air connection: Red/Yellow connector, * Power connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, Dodpfx As Agcpzscyokw * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion bar (aluminum): 30 VIN: WKESD00000847122 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.04m Internal height: 2.79m

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 890 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced transmission support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, at the rear, surcharge for front panel grid 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 folding supports at the rear, price: 1,900 euros, -- printing errors, mistakes and changes reserved, sample images --, more data under: !, More Details: ! Djdj Agfqrspfx Acyjkw

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 233,617 km, ref: W0015560 Equipment: Djde Agw Upjpfx Acyokw * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210875 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013056, empty load weight: 3,290 kg, maximum load weight: 9,800 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2023, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,060 mm, total length: 9,690 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: air, tire size: 235/75 R17,5", color: yellow, Please note: the images are archive photos. The vehicle may be in use! #Chassis centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly inclined, new design with "Load-Lock-Profil" for lashing straps Dkjdpo Afwuzefx Acysw - 1 pair of geared landing legs at front, straight lower section, one-side operation on the right in direction of travel - Side door stays, steel underrun protection - Anti-spray mud flaps on last axle only, rear impact protection - Spare wheel carrier (1 wheel) with fastening kit - Platform height 1060 mm #Towing equipment - Drawbar with approved 40 mm drawbar eye, haulage version - Drawbar height mechanically adjustable via threaded spindle, below floor level, max. range 200 mm - Drawbar length mechanically adjustable approx. 1950 - 2300 mm, lockable approx. every 50 mm, set to approx. 2100 mm #Axles + suspension - BPW axles at manufacturer's choice, tapered roller bearings, S-cam brakes - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system, colour-coded lines for easy servicing, spring-brake parking brake - Duomatic connection at front, with connecting line to the truck - EBS, electronic braking system with EBS connector at front - Please note: only to be towed by vehicles ensuring ABS effectiveness! - Raise/lower valve, vehicle stability system #Wheels and tyres - 235/75 R17.5, make at manufacturer's choice, steel rims, factory silver #Electrics - 24 V, multi-chamber lamps - Yellow LED side lighting, also coupled with indicators (flashing side marker lights) - 2 white front position lights, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front - 2 additional LED work lights at rear, switched via reversing light #Floor - Film-faced plywood approx. 30 mm, for high point loads - Premium floor sealing, floor jointed all round - Platform length approx. 7,300 mm #Front wall / front corner posts - Through-loading via double-leaf front portal doors, each with 2 internal cam bar locks - Steel corner posts, release device for side tarpaulin - Bridge plate approx. 2,400 mm wide, divided once, approx. 350 mm long for resting on tail lift, capacity approx. 1,800 kg, incl. tail lift support - (Drawbar length then approx. 2300 mm; with 2000 mm tail lift, coupling set-back on truck min. 20 - max. 240 mm) #Side boards - 25 mm aluminium hollow profile, 400 mm high, drop-down and removable #Centre stanchions - 1 pair of sliding stanchions, movable along entire length #Insert slats - Wooden insert slats #Rear wall / rear corner posts - Steel corner posts up to lower edge of roof - Tarpaulin attachment with round tube and tensioning ratchet - Double-leaf rear portal doors, each with 2 internal cam bar locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning buckles - Customer lettering Dachser on side tarpaulins and rear portal #Roof - Fixed roof with tarpaulin and roof bows, tarpaulin colour: white - Optimised rain gutter at rear on end bow, above doors #Country of registration / plates - Germany, Dekra inspection and expert report (§13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL

Condition: good (used), mileage: 378,757 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 6,360 mm, loading space width: 2,480 mm, loading space height: 2,360 mm, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, tail-lift, = Additional Options and Accessories = - Brake booster - EPS (Electronic Power Steering) - Particulate filter - Radio/CD player - Side door = Additional Information = Year of manufacture: 2012 Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,340 kg Payload: 5,160 kg GVW (Gross Vehicle Weight): 13,500 kg Technical condition: good Optical condition: good Reference number: 21 Vehicle number: 21 Mercedes Benz Atego 1324 / Carrier Supra 850 / Euro 5 / Tail lift .: Automatic Suspension: Leaf / Air Transmission: WDB9702651L640494 Air conditioning Engine brake EURO 5 - AdBlue Wheelbase: 4760 mm Tail lift Refrigeration unit Brand: CARRIER Type: Supra 850 Refrigeration engine: Diesel Internal dimensions: Length: 6.36 m Width: 2.48 m Height: 2.36 m Dkodpozuthusfx Acyow Special equipment: Audio system: CD radio, Electric windows, Graphic information display with eco-meter, Hydraulic steering gear LS 6 / LS 8, Fuel tank: 180 L, plastic, Splash guards on rear fenders, Steel rims 7.50x19.5 Additional equipment: Emission standard EURO 5, Axle configuration: 4x2, Exterior mirrors elect. adjustable and heated, Battery 115 Ah, Cockpit distributor, Roof hatch (steel), Cab: S (short), Suspension: Leaf / Air, Generator 80 A, Transmission 6-speed - Type: G 60-6, Urea tank (AdBlue): 25 L, Urea tank (AdBlue): plastic, Rear axle H 4, Crown wheel 368, Interior filter: Pollen filter, Body/Superstructure: Chassis, Model update Atego 2, Engine 6.4 L - 175 kW Diesel (OM 906 LA), Engine start/stop system, Engine brake with constant throttle, Wheelbase 4160 mm, Disc brakes, Side impact protection, Seats in cab: Co-driver single seat, fixed, Seats in cab: Driver's seat, standard suspension seat, Stabilizer rear axle, Underrun protection rear fixed, Underrun protection front, Immobilizer, Permissible total weight 13.50 t No liability for printing and typographical errors, changes, prior sale and errors reserved! = Company Information = No liability for printing and typographical errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, mileage: 407,000 km, power: 185 kW (251.53 HP), first registration: 07/2018, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,150 mm, loading space width: 2,470 mm, loading space height: 2,150 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Iveco Eurocargo 140 E 250 freezer vehicle with Mitsubishi TDJ 430 D refrigeration unit, Lamberet Multitemp – box body and tail lift. ATP/FRC: NEW!! New PARTS ENGINE (engine and cylinder head) from IVECO! Chassis: * Emission standard: EURO 6 C * 250 hp engine, 6,728 cm³ * Cruise control * Leaf/air suspension * Automatic transmission * Lane departure warning system * Brake assist * Hill start assist * Differential lock * ABS * ASR / switchable * Airbag * Air conditioning * Central locking * Double bench seat for passenger (3-seater) * Electric windows * Fog lights * Headlight range adjustment * Tire size: 285/70 R 19.5 * Tread depth: 8/6/6/5/9/13 * 14,000 kg GVW * Unladen weight: 8,580 kg * Payload: 5,420 kg! * Vehicle overall dimensions: 9,130 x 2,600 x 3,450 mm (L x W x H) Superstructure: LAMBERET freezer box body, year of construction 2018 * 18 pallet spaces * 3-leaf portal doors at the rear * Aluminum impact strips, 2 x on the right and left, bottom and top * Lashing rails, 2 rows on the right and left * Floor: aluminum tread plate * Internal dimensions: 6,980 x 2,470 x 2,200 mm (L x W x H) Dkjdpfx Ao Ahqagecyew * BÄR BC1500 S4-B4 tail lift, vertical * 1,500 kg lifting capacity Refrigeration unit: Mitsubishi TDJ 430D Multi refrigeration unit (year of construction 2017): * Engine / Electric (380 V) * Remote control in the cab * Temperature recorder * German vehicle * 1st hand! * TÜV / MOT / Inspection: new Errors and prior sale excepted!

Condition: used, machine/vehicle number: WKESDC27051236671, empty load weight: 4,400 kg, maximum load weight: 34,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2005, suspension: air, tire size: 385/55 R22,5", tire condition: 44 %, - The vehicle is currently in transit to stock. - The images are archive images. The vehicle may still be in use. - 3-axle semi-trailer for general cargo transport - #Chassis - Longitudinal members – container chassis – fixed design - No front or rear extension - 13.60 m chassis - Gross vehicle weight, permitted / technical: 39000 kg - Payload, permitted / technical, approx.: 34140 kg - Unladen weight (basic version), approx.: 4560 kg - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Container fittings: - 1 x 40 ft with tunnel - No front extension - 1 wheel chock with holder - Aluminium side underrun protection - Galvanised steel rear underrun protection - Half-shell mudguards Dkodpj Af Uv Sefx Acyow - 2 anti-spray mudflaps - Rear impact protection - 1 ADR plate - #Axles and suspension - SAF disc-brake axles - #Wheels and tyres - 385/55 R22.5" - Steel wheels, factory silver finish - #Electrical system - 24 V, multi-chamber lights, rear and brake lights, yellow LED side marker lights - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable - #Paintwork - Painted chassis - Landing legs, black-coated - Final character count: to be verified

Condition: used, machine/vehicle number: WKESDC27061272060, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2006, suspension: air, tire size: 385/55 R22,5", tire condition: 70 %, color: grey, - Vehicle in transit! - Archive images are used. The vehicle may still be in use. - 3-axle goods-carrying semi-trailer - # Chassis - Longitudinal members – container chassis - 13.60 m chassis - Permissible / technical gross weight: 39000 kg - Approx. permissible / technical payload: 34600 kg - Approx. unladen weight (basic version): 4400 kg - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Container fittings: - 1 x 40 ft with tunnel - 2 x 20 ft - 1 x 20 ft centrally positioned - 1 x 30 ft - With front and rear chassis extensions - 2 wheel chocks with holders - Aluminium side underrun protection Dodpfo Af Uzdex Acyokw - Galvanised steel rear underrun protection - Half-shell mudguards - 2 anti-spray mudflaps - Rear corner impact protection - 1 ADR plate - # Axles and suspension - SAF axles with disc brakes - # Wheels and tyres - 385/55 R22.5" - Steel rims, factory silver - # Electrical system - 24 V, multi-chamber lamps, LED rear and brake lights, yellow LED side marker lights - 2 white LED front position lamps - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cable - # Paint finish - Painted frame - # Landing legs - Black coated

Condition: new, Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: Dodpfxei E St So Acyskw NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system Dodpfxei Riv No Acyokw 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Dkodpfx Aoi Ri N Ujcyjw Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h Djdpjfydzbsfx Acyekw • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm  Capacity approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Dkodpfx Aeg I Uqiscysw Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) o Bearing lubrication located externally, optional central lubrication system available at an extra cost Delivery time approx. 16 to 18 weeks.

Condition: used, Size: 200x1280 mm 3 EUR/piece 100x1280 mm 1.5 EUR/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Dedpsik E Npjfx Acyokw Further accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/disassembly, buying/selling Changes and errors in technical data, specifications, and prices, as well as sales pending, are subject to change!

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Dedpfx Acsit I Sbjyskw Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: as good as new (ex-display), Suitable for shelving systems: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x Impact protection guardrail, 2nd quality Material color: yellow/black/galvanized Overall height: 400 mm Overall depth: 180 mm Clear width: 400 mm Dkedpfx Acsib H Dtsysw Consisting of: 01x CS Sigma profile, 2nd quality Material color: Sendzimir galvanized Profile dimensions: 300 x 75 x 15 mm Profile type: CS300-2.0 Material thickness: 2.0 mm Length: 300 mm 02x L-shaped impact protection corners, new Material color: yellow/black According to DIN standard Overall height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x Screws: M12 08x Nuts: M12 16x U-washers: M12 The impact protection guardrail is delivered completely pre-assembled.

Condition: new, empty load weight: 5,620 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,450 mm, loading space width: 2,340 mm, loading space height: 1,500 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2025, Equipment: ABS, Unladen weight: 5,620 kg, permissible total weight: 36,000 kg, cargo space (L x W x H): 7,450 mm x 2,340 mm x 1,500 mm. Tire size: 385/65 R22.5, cargo volume: 25 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (overlapping), sliding roof, 1x15- and 2x7-pin connector sockets, anti-spray system, alloy wheels. View our complete vehicle inventory on our website. Interested in financing? With our Value Added Service, we offer tailored financing options, full-service, and telematics solutions. We are happy to advise you. Djdpjyi Id Uofx Acyskw

Condition: new, cutting diameter 355 mm Dkjdpfx Acsmhm Aqjyew dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: used, Frame 7000*1100 mm Crossbeams 3600*120 mm Dksdpfsx U Agpsx Acysw Load capacity 2T/level If you require shelving or accessories in different configurations or versions, please contact us. We offer a comprehensive range of new and used shelving as well as accessories and are happy to support you with your planning. Additional accessories such as: Frames, corner and impact protection, anti-push-through devices, chipboard panels, wire mesh decks, rear mesh panels, depth bars are available. Shipping: Please enquire about shipping costs, stating your postcode, location, and the desired quantity of items. Additional services: Planning, racking assembly/dismantling, purchase/sale Subject to technical modifications, errors in details and prices, and prior sale!

Condition: used, Nagy PB-80 Add-on Bay for Pallet Racking With a standard pallet height (1.20 m), you can install 6 beam levels in the 10.3 m high add-on bay. Together with the storage locations on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet locations per rack bay with 4 pallets per bay. Material & Construction: The galvanized surface provides long-lasting corrosion protection. The bolted truss (diagonal and cross braces) allows for the easy replacement of individual components in the event of damage (e.g., from forklift impacts), unlike welded frames. Profile: The profile dimension of 80 x 60 mm is a typical dimension for medium to heavy-duty pallet racking uprights, to ensure the necessary buckling stiffness at over 10 meters in height. Manufacturer: Nagy Type: PB-80 Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Truss: bolted Upright surface: galvanized Clear bay width: 3.60 m Beam: 3600 x 120 x 45 mm Beam surface: blue painted (RAL 5015) Number of bays: 1 add-on bay Number of levels: 7 incl. floor location Max. pallet weight: 500 kg Permissible bay load: 2000 kg Permissible bay load capacity: 12000 kg Pallet locations: 28 Scope of supply: 01 x Upright approx. 10.30 x 1.10 m, galvanized 12 x Beam approx. 3.60 m, blue, incl. safety pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed professionally and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Dkedpfxjyvr Dgj Acysw Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse liquidation – we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Warehouse mezzanines for optimal use of space Rack inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load signs. - Creation of a legally sound test report including test label. We would be happy to offer you a suitable bank financing for your project. More pallet racks - new and used - can be found in our shop! International shipping costs on request!

Condition: used, This listing is for a Kern EMB 220-1 Balance. The unit is in full working condition and is ready for immediate release. Djdpexxzi Uefx Acyskw The Kern EMB 220-1 is a precision balance tailored for laboratory and educational settings. Its compact design and user-friendly features make it an excellent choice for accurate measurements in various environments. Key Features: Capacity and Resolution: Maximum Capacity: 220g Resolution: 0.1g This capacity and resolution make it ideal for weighing small samples, chemicals, and powders with precision. Compact Dimensions: Size: 170 x 240 x 38 mm Weight: 600g Its lightweight and compact form factor allow for easy handling and storage, perfect for classroom or lab benches with limited space. User-Friendly Display: The balance features a large LCD display with a digit height of 15 mm, ensuring readability from a distance. This is particularly useful in crowded work spaces. Simple Operation: Designed for ease of use, it operates with a two-button interface, making it accessible for users of all experience levels, including students in educational settings. Tare Function: The tare function facilitates easy adjustments when weighing items in containers, allowing users to exclude the weight of bowls, plates, or cups for accurate net weight readings. Power Supply: The balance runs on batteries (included), enhancing portability. The automatic shut-off function helps conserve battery life during periods of inactivity. Additional Features: It includes a ring-shaped draft shield (available on certain models) to minimize the impact of air currents on measurements, ensuring greater accuracy. A hook for underfloor weighing expands its functional versatility, allowing for weighing larger or bulkier items. Applications: The Kern EMB 220-1 Balance is versatile and suitable for various applications, including: Laboratories: Ideal for weighing chemicals and samples in research and testing environments. Educational Use: Perfect for classrooms where students learn about measurements and experiments. Field Experiments: Lightweight and battery-operated, making it a practical choice for outdoor scientific work. Technical Specifications: Weighing Capacity: 220g Resolution: 0.1g Dimensions: 170 x 240 x 38 mm Weight: 600g Display: Large LCD display with 15 mm digit height Operation: Simple two-button operation Tare Function: Yes Power Supply: Batteries (included) with automatic shut-off function

Condition: excellent (used), Year of construction: 2012, CNC machining center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of manufacture: 2012 Internal machine no.: 5 Travel paths: X-axis: 2,340 mm Y-axis: 800 mm Z-axis: 600 mm Clamping surface: 2,900 x 750 mm Pendulum machining: 2 x 945 x 800 mm Table load: approx. 2,800 kg Spindle taper: SK 40 Tool magazine: 30 stations Spindle speed: 30 - 8,000 rpm Equipment: Chip conveyor Paper band filter unit Handwheel HR410 Machine enclosure Dodpfx Aeylid Uscyokw 2x LTA extraction systems Partition wall Pickup magazine for angle heads

Condition: new, axle configuration: 2 axles, loading space length: 44,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 275/70-22,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Remarks = Internal reference number for inquiries: 3-478 PAVIC THTA 44Z tandem trailer with LIFT AXLE for timber transport, suitable for log lengths of 2, 3, 4, and 5 meters. ALCOA DURA BRIGHT * Stake body * 4x OptiPa SL bolster bodies, optionally 2x bolster bodies * 8x OptiPa AL10 stakes, optionally 4x AL10 stakes * Permissible technical gross weight: 21,000 kg * Air suspension * Ride height unladen approx. 1050 mm (loaded approx. 25-30 mm lower) * Chassis length: approx. 4400 mm (frame to frame) * Shunting coupling at the rear * Cross loader mount at the front on the side of the main beam * Welded ring elements for lashing, 2x per side * Folding support winch for improved ground clearance * Axle reinforcement for off-road specification * 2x SAF axles, 10t capacity each * Disc brakes * Twin tires 275/70R22.5 on steel rims * Safety cables for the air suspension * Axle lift control: first axle automatic lift with starting aid for EBS * Lifting and lowering device with 1 rotary slide valve * Smartboard/TIM/Infocenter * LED work lights (beams to rear and sides) * Rear lighting system: Rubolight/Trucklite multifunction LED lamps (dynamic indicators) -> At extra cost: ALCOA Durabright aluminum wheels and impact guard with lifting bar (see pictures) Price with Alcoa Dura Bright rims and 2 bolsters with 4 stakes = €38,990 net Deduction for steel rims. Financing available through our finance companies. Our sales team will be happy to assist you with any questions. Dsdpfx Aoylvkbecyokw This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Axle configuration Tire size: 275/70-22.5 Brakes: Disc brakes Suspension: Air suspension Center axle 1: LM rims; lift axle Center axle 2: LM rims Weights Gross vehicle weight (GVW): 19,000 kg Functionality Superstructure brand: PAVIC Short Log Stake OPTIPA SL Condition General condition: very good Technical condition: very good Optical condition: very good

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system Dkodpfx Aoyfgzdscysw 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, operating pressure: 10 bar, machine/vehicle number: 5789, CYCLONE MAXI is an indispensable and powerful 10 bar steam cleaning machine designed for a wide range of industrial environments and applications in demanding and diverse sectors such as food and beverage processing and manufacturing, transportation, and general industry. The CYCLONE MAXI range has been conceived and developed to provide a truly professional alternative to conventional cleaning equipment, with a focus on cleaning effectiveness while minimizing environmental impact. The hot, dry steam penetrates deep into surfaces to deliver thorough cleaning and disinfection. CYCLONE MAXI is supplied complete with a set of professional tools and accessories. CE-PED tested/certified Accessories: 6-metre steam hose Dedpeyft T Tofx Acyskw Steam gun