Used conveying machinery for sale (431)

Condition: like new (used), functionality: fully functional, Year of construction: 2023, lifting height: 11,000 mm, overall weight: 7,000 kg, lifting speed: 250 mm/s, power: 5.5 kW (7.48 HP), input voltage: 230 V, input frequency: 50 Hz, Two (2x) entire units, each with maximum 11m lift, procured directly from manufacturer, delivered in 2024 but never assembled or used. All components have been stored in dry conditions. Can be configured for less than maximum lift. All documentation available. Price is per unit. Open to counter-offers. Fsdpjymx Avsfx Ag Dspd Purchaser must collect.

Condition: good (used), Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm Fpsdpfx Aegv Nqxsg Djd -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm -Weight: 284 kg

Condition: good (used), Screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor, trough screw conveyor, trough screw conveyor -Auger conveyor: Conveying length: approx. 2500 mm -Design: stable -Drive motor: EM Marelli 1.5 kW -Transmission: Rossi -Speed: 35 rpm Fedpfxowna Rlo Ag Dopd -Auger: Ø approx. 240 mm -Auger pitch: 230 mm -Inlet/Outlet: 255 x 225 mm -Dimensions: see technical drawing in the photos -Transport dimensions: 3380/600/H670 mm -Weight: 310 kg

Condition: excellent (used), Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Fpjdpfxoxqgf Ej Ag Djd

Condition: good (used), Roller conveyor, conveyor belt, roller track -Roller width: 700 mm -Conveyor length: 5020 mm -Roller diameter: 80 mm -Axle spacing: 100 mm -driven: via belt Fedpfjb Rr S Hjx Ag Depd -Geared motor: 0.55 kW -Speed: 12.6 m/min -Number: 1x roller conveyor available Price: per piece -Dimensions: 5380/1050/H450 mm -Weight: 450 kg

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, Axial fan Axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Fan wheel: Ø 630 mm / see photos Fpjdpfx Aoylhwgsg Dsd -Quantity: 1x fan available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg Fpjdpfxsrv Av Ij Ag Ded

Condition: good (used), Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm Fpodpfx Asrrzfgog Ded -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

Condition: used, length 5650 mm height over floor 400 mm Fpjdpfeynntysx Ag Dsd width 300 mm total power requirement 2,9 kW Reinhardt conveyor belt type DB300 A for the efficient transport of wood, firewood, chips, and workpieces in woodworking. The robust construction enables a reliable and continuous conveying process in production lines, firewood production, and workshops.

Condition: good (used), Year of construction: 2007, - Spaleck Feeders . Type: SFLU 1950-300x3000 . L X W: 3.000 x 1.950mm. . Year of Manufacture: 2007 . Fedpfx Agjxwn H Do Djpd With 2 Pcs. Friedrich Unbalance motors of 2KW each, Springs and Frame with rubber springs. Feeders can be sandblasted and painted .

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Fodpfxstw Sm Ne Ag Dspd Condition: slight paint wear, otherwise as good as new

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. Fsdpfeyrffhjx Ag Djpd The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2025112701, Aluminum Inclined Conveyor Belt with Substructure Including adjustable feet and machine feet for leveling uneven surfaces - Infeed height: 500mm - Inclined section: 3,000mm - Discharge height: 2,000mm Design: Aluminum construction profile - Triple-reinforced profile, 135x45mm - Full-surface discharge sheet, 2.0mm galvanized Fpsdpfeydb Rwsx Ag Djd Drive roller and return roller: S235 steel, welded and machined Ø150x620mm, crowned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor, 1.10kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be performed by a qualified electrician) PVC Conveyor Belt DM 10/2 0+005 PVC green Belt width: 600mm Endless, high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs. corrugated sidewalls, 80mm high, 50mm wide, flush high-frequency welded 18 pcs. T60 cleats, 430mm long, pitch approx. 508mm, center-mounted Belt material: 2-ply, highly cross-stable Due to the side corrugated edge, the usable belt width is reduced: Usable width 500mm, as follows: (Top view) Transverse configuration: 50+500+50mm

Condition: good (used), Axial fan, fan, blower, electric motor, blower, axial fan, axial ventilator, axial fan, axial ventilator -Manufacturer/Type: unknown -Fan wheel: Ø 750 mm Fjdpfsyhl Arox Ag Dspd -Item No.: 99082644/001 -Dimensions: Ø 750 x 240 mm -Weight: 28.4 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: seri nr 84138, Year of construction: 2024, operating hours: 5 h, load capacity: 30,000 kg, fuel type: electric, empty load weight: 16,800 kg, total length: 140,000 mm, Combilift container loading system suitable for 20, 30, and 40 FT containers. Includes 2 container transport wagons. Fpodeyigkdspfx Ag Dod

Condition: good (used), For sale are 2 identical spiral conveyors / sorting machines 1* with silenced sheathing pot dm 820 cm Pot depth 36 cm Dimensions without cabin 125*158*135 with cabin 125*158*128 The cabin has several access doors Sorted were various holders for drywall screws (cable ties probably also possible) The spiral conveyors are functional and control to the respective machine are present The devices can be visited and/or tested by arrangement Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website Fsdpfx Agjhrntms Dspd

Year of construction: 2000, condition: used, functionality: fully functional, We offer this used Packtech collecting belt / conveyor belt, year of manufacture 2000. The belt is designed as an industrial take-away belt and is supplied complete with control cabinet and drive, suitable for integration into production and packaging lines. Machine Information Manufacturer: Packtech bv Machine type: Collecting belt / conveyor belt Machine number: 20121 Fpsdpfeyhl Izsx Ag Dsd Year of manufacture: 2000 Technical specifications Electrical connection: 3 × 400 V AC + N + PE Installed power: 2 kW Includes control cabinet with frequency inverter Drive with electric motor and gear reducer Adjustable product guides Suitable for transporting and grouping products in industrial environments The machine is supplied as shown and is ideal for applications in the packaging, sorting, or processing industries. Interested or have questions? Feel free to contact us for more information, a quotation or to arrange a viewing.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design Fjdpsyfm Spjfx Ag Depd The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ S355 / St52-3 vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed Fpodpouqynmjfx Ag Dod 2 x imbalance motors 2,5kW NEW

Condition: used, Manufacturer: REWA Type: Solid body auger, with bearings on both sides, Other: without cover, WITHOUT motor and gearbox, with solids pusher Length: 8.00 m Fpodpfx Agsrk Etue Djd Ø screw: 300 mm

Condition: used, FULL-BODY AUGER STEEL, TOTAL APPROX. 7,49 M Type: Full-body auger steel Fjdpfxsrn Uxie Ag Dspd Diameter: 160 mm Round housing: galvanized steel Complete length: 7.49 m Length: from round housing with motor and gearbox

Condition: used, Solid body auger: Steel with bearings on both sides Diameter: 330 mm Housing: galvanized steel and painted sheet metal (hopper) Manufacturer: ROEDER Fodport T Alofx Ag Depd Type: TS 315 Year of construction: 1992 Gearbox: SK 22-100 L/4 , 59 1/min max. 302 Nm Length: 3,40 m

Condition: used, Machine: Screw conveyor, hollow screw Fodjrn T R Iepfx Ag Dopd Length: 6.30 m Ø auger: inner auger 170 mm, outer auger 460 mm

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Fsdpfxern U H He Ag Dspd Model: TSF 315, No. 197 Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: used, Machine: Discharge Screw, Screw Conveyor, TSF 315 Solid Body Screw, second-hand Manufacturer: Askania Mass: 495 kg Fsdpfx Aerl Sv Ssg Depd Year of construction: 1996 Length: 5,20 m Ø auger: 350 mm Weight: 435 kg Speed: motor 1400 rpm / gearbox 53 rpm Engine power consumption: 2.2 kW Gear oil: 1.8 l Material: Housing > galvanized steel, auger > mild steel / cover > stainless steel