Used Jpt 310 for sale (2,309)

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Lodpfx Amowfqh Aersac Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. UK Price £9,000 + VAT Single belt Finishing sanding machine which has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Connected to services and available for any demonstration. Excellent Condition. Working width 1350mm. Thickness between 3mm & 200mm. Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers. Lasdpfsyuy R Dex Amrec

Condition: excellent (used), Set of 2x Weinig Powerlock L=310 Z=2 heads 8000 rpm Alu Lightweight Diameter 125 mm 1x bottom + 1x top Weinig 10025811 (20 05 071) Weinig 10025812 (20 05 070) Lodpfx Ajzdq H Tsmrjac Centrolock reversible knife system Z2 Mounting: PowerLock HSK

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic Laodsyf Hhwopfx Amrec - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 331,173 km, first registration: 07/2013, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 6,300 mm, color: other, driver cabin: day cab, emission class: euro5, suspension: steel-air, total length: 11,060 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2013, Tyre size: 315/80 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Steered; Tyre tread left: 10 mm; Tyre tread right: 10 mm; Suspension: Leaf suspension Rear axle: Twin tyres; Tyre tread left inner: 9 mm; Tyre tread left outer: 6 mm; Tyre tread right inner: 8 mm; Tyre tread right outer: 6 mm; Suspension: Air suspension Unladen weight: 11,195 kg Payload: 7,805 kg Gross vehicle weight: 19,000 kg Lsdpjyyhtxjfx Amrsac Damage: none

Condition: good (used), Adept control unit, Model 310, with operating panel. Lasdpjzdimaofx Amrec The control unit is supplied together with the operating panel, cables, and software package.

Condition: used, mileage: 18,000 km, first registration: 12/1993, fuel type: gasoline, axle configuration: 4x2, color: red, gearing type: mechanical, total length: 5,230 mm, total width: 1,970 mm, total height: 2,260 mm, Year of construction: 1993, Empty weight: 2.260 kg MERCEDES 310 1993 EX DUITSE BRANDWEER , DUITS KENTEKEN. PERFECTE TOESTAND WERKELIJK ALS NIEUW. Laedpfoy Uwxyox Amroc

Year of construction: 2015, condition: used, Year of manufacture: Jan 2015 Ljdox T Acnopfx Amrjac New: No Serial number: 310/80R22.5 Very niceheavy duty terminal tractor tires 4 x 28 mm profile 1 x 20 mm profile

Condition: used, Lens Lajdocrcxtjpfx Amrec Height without base: 290 mm Base width: 50 mm Distance: 170 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Ljdpfxjzfilwe Amreac Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes Ledpfex Ei Syjx Amrsac - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Laedpfx Ajzdq Hmemroc Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. Lajdpfx Amstv Iibjroc voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: new, Year of construction: 2025, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 65 mm, rapid traverse X-axis: 1,200 m/min, rapid traverse Y-axis: 1,200 m/min, rapid traverse Z-axis: 1,200 m/min, total length: 800 mm, table width: 400 mm, overall weight: 1,550 kg, ELMAG Tool Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and cost-effectiveness, sure to impress any metalworking professional. This top ergonomic design offers easy operation, stepless speed control, and outstanding value for money, making it ideal for workshops, training centers, and toolmaking. Standard Features: - Digital position display - 4 long milling arbors: 16, 22, 27, 32 mm - 3 reducing sleeves: MK 1, 2, 3 - Operating instructions / CE certificate Advantages: - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw drive on all axes X/Y/Z - Infinitely variable feeds on all axes - Coolant tank integrated into the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED worktable illumination - Vertical milling head with adjustable quill - Includes central lubrication system - Digital spindle speed display - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position display for maximum precision on all 3 axes - Spindle rotation clockwise and counterclockwise - Digital speed display - Potentiometer for stepless feed axis control - Selector switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop switch Technical Data: Drilling capacity in steel: 50 mm Face milling capacity: 125 mm End milling capacity: 40 mm Spindle taper: ISO 40 Speed range: 40 - 2000 rpm Laodpfx Ajy Hlx Eomrsc Speed settings: stepless Quill stroke: 65 mm Table T-slots / width × spacing: 6 / 14 × 63 mm Vertical table T-slots / width × spacing: 3 / 14 × 63 mm Spindle nose to column distance: 180 - 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Spindle nose-to-table distance: 50 - 450 mm Horizontal spindle-to-table distance: 145 - 545 mm Milling table size: 800×400 mm Table travel X × Z: 500 × 400 mm Vertical table surface: 1020 × 225 mm Feeds X/Y/Z: 10 - 1200 mm/min Feed rates X/Y/Z: stepless Motor power: 3,700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Machine dimensions: 800×400×450 mm Length × width: 1500 × 1700 mm Height: 2000 mm Weight: 1,550 kg The machine is located at our facility in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected upon request. Please schedule an appointment in advance.

Condition: excellent (used), mileage: 662,404 km, power: 228 kW (309.99 HP), first registration: 09/1999, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, total length: 7,500 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1999, Equipment: ABS, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Day Cabin - Hydraulics - Open roof - PTO - Rear suspension: Air - Sper - Tipping hydraulics = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering Rear axle 1: Double wheels; Differential lock; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Technical condition: very good Ljdpjzd S I Sjfx Amreac Visual appearance: very good

Condition: ready for operation (used), Heidenhain LS 476C ML 120mm ID: 310 754 02 linear scale, SN: 6968499B, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Lajdpfxox Er Eis Amrec

Condition: ready for operation (used), Heidenhain LS 486C linear scale ML: 1140 mm Id. 329 993-31 SN:13148128 + AE LS 486C reading head Id. 310 727-51, used, in good condition, 100% functional, scope of delivery as shown in photos. Lasdpfox Er Epox Amrjc

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Lajdpodz Spwefx Amroc Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: used, mileage: 641,965 km, first registration: 02/2016, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 6,000 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, cruise control, electric window regulation, power mirror, spoiler, tail-lift, = Additional options and accessories = - CD player - Roof spoiler - Headlights - Toolbox = Further information = Tyre size: 315/70 R22.5 Brakes: Disc brakes Lajdpfxjy Il Ago Amrjc Front axle: Steered; Tyre tread left: 7 mm; Tyre tread right: 7 mm; Suspension: Leaf suspension Rear axle: Twin tyres; Tyre tread left inner: 6 mm; Tyre tread left outer: 6 mm; Tyre tread right inner: 6 mm; Tyre tread right outer: 6 mm; Suspension: Air suspension Unladen weight: 10,665 kg Payload: 8,335 kg Gross vehicle weight: 19,000 kg Damage: none

Condition: used, mileage: 139,000 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 08/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Body/structure: Panel van double cab standard, LED cargo area lighting Lasdpfsza S Rajx Amrec Additional features: 3rd brake light, overhead storage compartment in cab, driver’s airbag, traction control system (ASR), audio system: radio/CD player with multi-function display, electrically adjustable and heated exterior mirrors, integrated indicator lights in exterior mirrors, rubber flooring in cargo/passenger area (fully covered), onboard computer, headliner in passenger area, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), driver assistance system: hill start assist, driver assistance system: emergency brake assist, sliding window in cargo/passenger area: 1st row left, sliding window in cargo/passenger area: 1st row right, 165 A alternator, grab handle B-pillar, rear wing doors without glazing (180-degree opening angle), heater with recirculation function, interior filter: pollen filter, Isofix child seat fixtures, body/structure: high-roof panel van, body variant: medium-high roof, silver radiator grille, partition wall behind 2nd seat row, steering column (steering wheel) adjustable in height and reach, headlight range adjustment, truck registration, engine 2.0 litre – 77 kW TDCi CAT, front and rear parking sensors, manufacturing location: Otosan, wheelbase 3300 mm, full wheel covers, spare wheel matching tire size, low-emission according to Euro 6 emissions standard, right-side sliding door in cargo/passenger area, wide side protective moldings (body cladding), seat package 13: driver's seat (4-way adjustable) – double passenger seat, fabric, seats in cargo/passenger area: 1st row, 3-seat bench, partially painted bumpers, Trend trim, integrated rear step, tinted glazing, half-height trim in cargo/passenger area, second folding remote key. The vehicle is in good condition. New TÜV and emissions test available at an additional cost!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Lsdoyzxa Espfx Amroac Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: new, Year of construction: 2025, machine/vehicle number: XPD00285, fuel type: diesel, motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA Dimensions of cargo space: 409 x 151 x 228 cm CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Production country: CN Additional information Lsdpfx Aozc Dwqsmreac Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: used, Year of construction: 2007, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, Weight: 4.000 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes Ljdeyzp Akepfx Amreac - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: No - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 971,464 km, power: 310 kW (421.48 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: automatic, suspension: other, loading space length: 8,050 mm, loading space width: 2,460 mm, loading space height: 3,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, fog lights, parking heater, retarder, spoiler, tail-lift, = Additional options and equipment = - Aluminum fuel tank - Brake booster - Roof spoiler - Intarder - Air conditioning - Radio/CD player - Sun visor - Auxiliary heater = Notes = Lajdjzdbv Hspfx Amrec TRANSPORT TO ANTWERP €590 = Additional information = Front axle: Steered; Suspension: Parabolic springs Rear axle: Twin tires; Suspension: Air suspension Unladen weight: 9,830 kg Payload: 9,170 kg Gross vehicle weight: 19,000 kg Technical condition: Very good Visual condition: Very good Reference number: 10

Condition: used, mileage: 241,262 km, power: 70 kW (95.17 HP), first registration: 10/2014, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, total length: 7,200 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2014, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, Payload: 1272 kg, Tare weight: 2228 kg, Gross vehicle weight: 3500 kg, Unbraked trailer load: 750 kg, Braked trailer load, center axle: 2000 kg, Cabin type: Single cab, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Color: White, Lighting type: Halogen lamp, Bluetooth, Engine power: 70 kW (94 hp), Fuel: Diesel, Euro standard: 5, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and lengthened, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, L3H2 Maxi Post NL Interior, Automatic, Euro 5, 95 hp!, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: VK-070-B Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth, left: 4 mm; Tire tread depth, right: 4 mm Axle 2: Tire tread depth, left: 1 mm; Tire tread depth, right: 4 mm Weights Unladen weight: 2,228 kg Payload: 1,272 kg GVW: 3,500 kg Functional Loading platform height: 59 cm Condition Overall condition: average Laodpjzcltaofx Amrec Technical condition: average Optical condition: average Damage: none Number of keys: 1