Used Channel for sale (945)

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: BA 20090966, For sale is a film die / single-channel die from the manufacturer EDS GmbH, Austria, type FK-TID 1650mm, manufactured around 2010. General information: • Manufacturer: EDS GmbH, Austria • Type: Film die FK-TID 1650mm • Serial number: BA 20090966 • Year of manufacture: approx. 2010 • Lip width: 1,650 mm • Opening ratio: 0.5 – 1.5 mm • Weight (approximate): 970 kg • Nominal torque of screws: 70 Codpfx Ae Ahm Tvjp Djhd - 70% for operating temperatures of 17.8°C - 288°C - 60% for operating temperatures above 288°C • Electrical equipment: 240 volts, single-phase • Total power: 27,000 watts • Number of control zones: 16 Condition Used, fully functional. • Sale from location (EXW) • Further information and additional photos available upon request. • Errors, changes and prior sale reserved.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,500 h, functionality: fully functional, Channel baling press Paal Pacomat III-50D, year of manufacture 2022, very good condition Technical data: Manufacturer Kadant Paal Type Pacomat III-50D Year of manufacture 2022 Operating hours approx. 1500 Pressing force 50 t Connected power 24 kW Feed opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, film Cjdpfxo Ah Riks Ap Djhd The press is still in use until the beginning of December and can be inspected while in operation. The condition is very good. It has only been used for paper/punching waste. The complete operating manual including electrical/hydraulic wiring diagram and CE declaration is available. The conveyor belt shown in the pictures is not included in the scope of supply. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any guarantee.

Condition: used, functionality: fully functional, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserting machine. Chsdpfxjy Izcps Ap Ded

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons Chodpfx Apoz R S T Uj Dsd maximum width: 600 mm inner and outer coil diameter: 508–920 mm hydraulic jaw expansion: 460–640 mm 4 kW Roll forming line Type H 18 stations maximum width: 600 mm maximum thickness: 0.8 mm shaft diameter: 60 mm maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use; new value 450,000 euros Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Elektror SD-6/S892 German Industrial Side Channel Vacuum Pump / Blower (2.3 kW, 400 V), Used Equipment Technical Data: Manufacturer: Elektror Airsystems / Karl W. Müller (D-7300 Esslingen, Made in Germany) Type: SD-6 / S 892 Serial No.: 806166 Chjdpfxs Ahqmdo Ap Dsd Overall Dimensions (W × D × H): 400 × 460 × 430 mm Power (50 Hz): 2.3 kW (2800 RPM) Power (60 Hz): 3.1 kW (3360 RPM) Supply Voltage: 400 V (3-phase) / 220–290 V / 380–500 V Current Consumption (50 Hz): 9.2 A (Δ) / 5.3 A (Y) Maximum Pressure / Vacuum (50 Hz): 300 mbar / 300 mbar Airflow (50 Hz): 4.6 m³/min (276 m³/h) Airflow (60 Hz): 5.6 m³/min (336 m³/h) Protection Rating: IP54

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Chedpfxjzhap Es Ap Djd Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Includes documentation, wiring diagram, and operating manual.

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Cjdpfjz H I Dxex Ap Djhd Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Codpfxe Af Ig Uo Ap Dohd Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: used, This listing is for the Gilson PIPETMAN L P20L 2-20uL Single Channel Pipette Light Yellow The unit is in full working condition and is ready for immediate use Chjdpjxv Drmsfx Ap Djd Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the Gilson PIPETMAN P20 2-20uL Single Channel Pipette Light Orange 535744 Colour-code Orange The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods Cjdpfx Aexv Drgsp Dohd GLP features include 2-D bar code for traceability

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Pressing force 75 t Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h Cjdpfxe Afwy He Ap Dohd 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Chjdpfxsxv Dt Ds Ap Dsd Fully adjustable 1–10 µL range with fine decimal display Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic

Condition: used, This listing is for the Gilson PIPETMAN P5000 500-5000uL Single Channel Pipette. Colour-code Purple The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Cjdpfoxv Dqpsx Ap Dohd Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, Yokogawa WT5000 Precision Power Analyzer Yokogawa WT5000-HG-F High-precision power analyzer for electrical power measurements For sale is a used Precision Power Analyzer from Yokogawa Test & Measurement Corporation. The device is suitable for highly accurate power, voltage, current, and energy analysis in development, research, testing laboratories, power electronics, drive technology, and quality assurance. Technical Data Manufacturer: Yokogawa Type: WT5000-HG-F Device Type: Precision Power Analyzer Date of Manufacture: November 14, 2024 Serial No.: T11C17539 Equipment Name: Precision Power Analyzer Model: WT5000 Suffix: -HG-F Made in Korea Measuring Element: 760903 Current Sensor Element Voltage Input: 1000 V max. Sensor Power: ±15 V DC Configuration / Modules as shown in the pictures Connections / Interfaces: Ethernet USB 3.0 USB Front Connection GP-IB / IEEE 488 Video Out / XVGA BNC Connections Ext. Clock Analog / Pulse Inputs Power Connection: 100 - 120 V / 200 - 240 V AC 50 / 60 Hz 650 VA max. Dimensions (W × H × D): approx. 430 × 221 × 550 mm Weight: approx. 18 kg Features Large color display Touchscreen operation Front-side control buttons Multi-channel measurement system Pluggable measuring elements Current sensor element 760903 USB data interface Cjdszhl D Iepfx Ap Dshd Ethernet interface GP-IB interface Video output Power cable Accessories as shown in the pictures Applications Power measurement Energy analysis Electric motor testing Inverter testing Power electronics Battery and drive technology Automotive Research and development Testing laboratory Quality assurance Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table or other items shown in the photos that are not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by phone.

Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z Makino Professional 6 (FANUC FS31i-B) Professional 6 Version X-axis 350 mm Y-axis 300 mm Z-axis 250 mm B-axis (swivel range) 180° (0° – 180°) C-axis (rotation angle) 360° continuous Distance table surface – spindle center 160 – 410 mm Table Max. load capacity 75 kg Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions) Chuck EROWA Speed range 100 – 30,000 min⁻¹ Drive power (25 % ED / continuous) 15 kW / 11 kW Torque (25 % ED / continuous) 23.8 Nm / 21 Nm Interface HSK-E50 Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm Repeatability X/Y/Z ± 0.0010 mm Positioning accuracy B/C-axis ± 2.0 s Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C. Capacity 20 tools Max. tool weight 3 kg Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions) Max. tool length 200 mm Interface HSK-E50 Connected load 40 kVA Compressed air 5 – 8 bar, max. 500 l/min 2,300 × 1,868 × 3,030 mm 4,600 kg Spindle with 30,000 rpm, HSK-E50 interface Rigid tapping Table with EROWA / System 3R chuck (DD motor), high-precision bearings Linear scales (X, Y, Z) Tool changer with 20 pockets (ATC 20), HSK interface Collision Safeguard (CSG) Robot door, loader interface (A-type) Chip conveyor with drum filter and downstream cyclone filter Flushing channel, air blower, coolant nozzles at spindle nose Fully enclosed work area, safety-guarded operator door Portable hand pendant Super GI.5 control, High-speed smooth TCP, GI-Smoothing Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining 3-dimensional cutter compensation, tilted working plane Dynamic fixture compensation for rotary table, VP control Adaptive control (AC Control), energy saving function 2 GB part program memory, Data Center 1 GB, 1,000 programs Tool compensation memory: 400 offsets, type C 54 workpiece coordinate systems (6 + 48) User macro programming with 1,100 variables MRDF sensor (Machine Relocation Detection Function) EROWA Power Chuck Loader interface (A-type) instead of (L-type) Cedpfo Ah D Twsx Ap Dohd Coolant temperature control unit (constant coolant temperature, with heating) Workpiece wash gun (operator side) Coolant shower Connection for oil mist extraction (Ø 125 mm) Air dryer Tool length measurement by BLUM laser, incl. tool breakage detection 3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point) i-Set-up (additional operator panel for easy workpiece alignment) MML interface (fast Ethernet card) Network integration Remote diagnostics setup (VNC/EDM viewer, installation and training) OPC UA interface for Professional 6 (35 readable tags) Tool retract and re-approach function 3D model of the working area

Condition: used, Borelli cap chute for MCA 28 mm. Item number: ID6133. Cedps Ahliiefx Ap Djhd

Condition: used, This listing is for the Rainin E4 XLS Electronic Single Channel Pipette The unit is in full working condition and is ready for immediate use Chjdpoxhf E Sjfx Ap Djd Large color screen with 360° trackball/joystick and carousel menu for easy navigation Multiple pipetting modes: Standard: e.g., basic, multidispense, mix Advanced: titration, dilution, fixed‑volume, reverse pipetting True Manual mode: real‑time control over aspiration/dispense speed Independently adjustable speeds for aspirate, dispense, and mix RFID-enabled for tracking service info, calibration, and protocols (supports GLP/GMP)

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Codpfsxl Ezhox Ap Dehd Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserter. The issue that needs repair concerns only the reading function. Csdpfxjyq Rm Ue Ap Dohd

Condition: used, RMS Chjdjzdta Aepfx Ap Dod Type: SW 3009 RMS Vibration Exciter RMS Vibration Exciter SW 3009 with side-channel blower SKP49033-01/06 Type: SW 3009 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the PIPETMAN L P1000L 100-1000uL Colour-code BLUE The unit is in full working condition and is ready for immediate use Chedpsxv Drajfx Ap Djd Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the PIPETMAN L P10mL 1-10mL Colour-code Light Blue Chsdpfx Apoxv Dq Ne Dod The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the Gilson PIPETMAN P2 0.2-2uL Colour code Red The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Chsdpjxv Dqvsfx Ap Dsd Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, 4 ink trays with 22-channel control from Microcolor I unit remotely (off-press controls) Cedpfxov Nzrns Ap Dshd

Condition: used, volume flow: 230 m³/h, Becker SV 5.250/2-74 Industrial Side Channel Vacuum Pump / Blower (230 m³/h, 3.0 kW), Used Equipment Technical Data: Manufacturer: Gebr. Becker GmbH (Made in Germany, Wuppertal) Type: SV 5.250/2-74 Codpfj Ahqniex Ap Djhd Serial No.: E 1264885 Airflow / Suction Capacity: 230 m³/h Suction-Side Vacuum: -300 mbar Blower Speed: 4600 RPM Drive Motor Data (VEM): Manufacturer: VEM-Antriebstechnik AG (Made in Germany) Type: KPER 100 L 2 Power: 3.0 kW (50 Hz) / 3.6 kW (60 Hz) Supply Voltage: 230/400 V (3-phase) Current Consumption: 10.7 A / 6.15 A Motor Speed: 2840–2880 RPM Protection Rating: IP55 Features: Robust cast housing and complete unit mounted on a heavy-duty base plate Enclosed, oil-free operation providing clean air Integrated silencer unit Overall Dimensions: Width: 660 mm Depth: 425 mm Height: 500 mm