Used Frame for sale (9,015)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: PI2512080FF001, tank capacity: 600 l, usable tank capacity: 600 l, total length: 2,000 mm, total width: 1,520 mm, total height: 1,700 mm, inner diameter: 1,200 mm, wall material: stainless steel, discharge height: 1,000 mm, input voltage: 38 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, 1. The pot liner is made of 304 food-grade stainless steel, with an inner liner of 5mm and an outer liner of 3mm. The pot liner is formed in one stamping process. 2. Pot inner diameter size: 1200mm, depth 750mm, working capacity approximately 200-400kg. 3. The dimensions of the equipment are approximately 2000mm in length (including control cabinet), 1520mm in width, and 1700mm in height. (The height when the large arm is raised is about 2450mm). 4. The total power of the equipment is 38.2 kW, with a heating power of 36 kW (controlled in three levels, each can be turned on separately). The mixing motor is 3 kW (using variable frequency speed regulation). 5. Heating method: The heating tube heats the thermal oil, allowing for setting the temperature, frying time, and continuous frying for extended periods. 6. The main structure of the frame is entirely made of 80*80 high-strength stainless steel. 7. Stirring system: It adopts a special planetary tilt rotation, 360-degree scraper without dead corners, and is equipped with a stirring auxiliary device. The stirrer uses a polytetrafluoroethylene scraper, and the pot has a side scraper device. 8. The stirring belt has variable frequency (the stirring speed can be adjusted), comes with a gear-free maintenance motor and uses thermal oil. 9. The equipment has dual-cylinder hydraulic discharge, equipped with a 1.5kw hydraulic station, with a discharge height reaching 900-1000mm. Hedpo Agm S Tjfx Akiow

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 777, functionality: fully functional, input frequency: 50 Hz, overall weight: 3,500 kg, Machine used for less than one year, in brand new condition. Hsdpfx Ake Agww Djisw

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion system connected by a torsion bar to grant a planar movement of the movable press platen. Hedpfx As Ad Hatjkiow Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: used, Year of construction: 2008, functionality: fully functional, For sale: a window and door pressing machine, model Junior, manufactured by the Italian company Casolin. Bale pressing machine. Working area: 3000 mm (width) x 2500 mm (height). The machine is in good working order. Hedpfx Aezzn Dwekisw We have the instruction manual in English. Export price – domestic price + VAT. Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Hodps Aa A Eqofx Akiow Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: good (used), For sale: HESS frame press pneumatic, retrofitted with pressure booster control max. press length approx. 355 cm in good condition, from a small carpentry workshop. Hsdpfxe Af Hums Akisw

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Hjdpfx As Abbd Iokiew Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus 350 mm, with numerous frame saws and grinding machines. Hodpfxsz R Uvxo Akiew

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Hodpfelqxg Hsx Akiew Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: used, Year of construction: 1992, Used Machine Year of Manufacture: 1992 Features and Technical Specifications: - Electrically and oil-hydraulically controlled frame press - Pressing force up to 1,200 kg - Two movable longitudinal pressure beams are mounted on double ball bearings and guide rails - These rails allow for continuous height adjustment of the cylinders Hodpfx Ajzk Nl Uekijw - The press cylinders are adjusted via a pressure lever with quick-adjustment and self-locking mechanism - Two electrically-controlled oil-hydraulic directional control valves (with 3 operating stages) are operated by hand levers - This allows you to press with precision and assemble even the most complex frame structures - Working height x working length: 2000 x 3000 mm - With 3 vertical pressure cylinders - With 2 horizontal pressure cylinders - Pressure cylinder stroke: 120 mm - Three-phase motor: 1.3 kW - Pressure control unit/press pressure adjustable from 0 to 60 atü Dimensions: 3950 x 900 x 2550 mm Weight: approx. 620 kg Availability: available shortly Location: Flörsheim

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Hsdjig Hzkspfx Akijw The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), Hedez Nkutopfx Akiow subject to prior sale.

Condition: good (used), Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Hodpe Agf Dtefx Akiew Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions for transport mm 3870 x 1040 x 2690 h Weight kg 1800

Condition: used, The second-hand Maweg Euronova-S hydraulic frame press is designed for pressing and assembling windows, doors and frames in professional woodworking. Featuring swivelling pressure shoes, it is also suitable for sloping windows. Hodpfxjz Hiure Akiow Technical data: - Press height: 2,250 mm - Press width: 4,500 mm

Condition: used, Year of construction: 1991, used frame press pneumatic working area 3000 x 2000 mm with center pressure bar absolute angular accuracy without correction comfortable working height due to adjustable press corners actuation of the working cylinders is done via 2 compressed air valves all pressure corners are adjustable Hedpfjw I Un Rox Akisw the pressures can be set from 0-15 bar shipping dimensions: 320x100x270 cm availability: short-term location: Röllbach

Condition: excellent (used), For sale: 3 aluminum frame silos. Previously used as granular material silos for an injection molding plant. 2 x 75 m³ (13.10 m long, diameter 3 m), 1 x 95 m³ (15.70 m long, diameter 3 m). Manhole. Excellent condition. Hedpfew I Efmjx Akiow

Condition: excellent (used), functionality: fully functional, Working width 3200 mm year of manufacture 1992 motor power 7 kW Hedsypg Rmjpfx Akiow pressing time adjustment automatic opening emergency stop switch - pull cord

Condition: used, Year of construction: 2002, Year of manufacture: Mar 2002 New: No Year of construction: 2002 Axle 1: left mm right mm Axle 2: left mm right mm Axle 3: left mm right mm Hedpfx Ajyn Nwgekiew We have the possibility to stack trailers!

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm Hedpfszlyv Tox Akisw • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Hedjzk Nwkepfx Akisw Availability: by arrangement Location: Röllbach

Condition: ready for operation (used), working length: 3000 mm working height: 1600 mm Hsdpfxjzww Epe Akiow 3 vertical actuators 2 horizontal actuators manual operation mode pump motor power: 2.2 kW 1000 kg

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm Hodpoyuylnsfx Akiow – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, arm reach: 3,000 mm, type of input current: three-phase, load capacity: 500 kg, control cabinet width: 600 mm, control cabinet height: 2,000 mm, overall weight: 300 kg, input voltage: 220 V, controller manufacturer: Tawers, input current: 22 A, pivoting range: 270 °, teach pendant manufacturer: Panasonic, Equipment: documentation/manual, type plate available, Panasonic Welding Robot TA-199WG/PA-C Frame, complete with controller, software, and full set of control cables; Robot Controller GIII Modules for rotator and bearing unit Rotator Pana Dice 500 and rotator, Pana Dice 500 (can operate simultaneously on the machine) Wire feeder Power source for MIG/MAG and TIG welding, Panasonic Tawers Pulse Anthropomorphic manipulator Water-cooled welding torch with anti-collision function Water chiller Tawers TA-1900 WG III Manipulator Number of controllable axes: up to 12 Maximum welding speed - 180 m/min linear Maximum working area: 1895/3790 mm Panasonic Pulse Power Source Welding methods - MIG/MAG and TIG Duty cycle 350A/80% Panasonic Controller 7-inch color display Windows operating system Panasonic Pana Dice 500 Rotator Max load - 500 kg Panasonic Pana Dice 1000 Rotator Hedpfxoyzn D Hs Akijw Max load - 1000 kg

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hsdjxz Dqmepfx Akiow

Condition: excellent (used), 0.75 kW motor Working height: 205 cm Working length: 300 cm Working width: 8 cm 4 upper clamping jaws 2 lateral clamping jaws Hjdpfxjzu Ndrs Akijw