Used Engine Test Bench for sale (28,683)

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Pjdpfx Aasxzgn Ij Ejha Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm Phjdoxmvl Tjpfx Aa Eoa LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Podpfxjx Exmtj Aa Esha Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Gillardon GT 16 bench drill - MK2 holder Phsdpfx Ajum Staoa Eea - infinitely variable speed Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: PRJ061185, throat depth: 190 mm, spindle speed (max.): 4,300 rpm, spindle speed (min.): 225 rpm, column diameter: 65 mm, drilling capacity: 18 mm, type of input current: three-phase, spindle mount: MK 2, input voltage: 400 V, spindle stroke: 80 mm, Equipment: rotational speed infinitely variable, Exhibition machine, year of manufacture 2020 – with minor signs of use. The machine was exclusively used for demonstration purposes in our showroom. Includes machine lamp – without drill chuck. Standard equipment: - Mushroom-head emergency stop button (latching) - Reversing switch with neutral position. Manually operated for clockwise and counterclockwise operation - Main switch with lockable motor protection switch - Infinitely variable speed control - Protection class IP 54 - Spindle guard with electrical interlock - Paint finish: DD textured lacquer, signal white RAL9003, PANTONE 7545c, black Technical data: Drilling capacity in steel E335 (St 60): 18mm Thread cutting in steel E335 (St 60): M12 Thread cutting in cast iron EN-GJL-200 (GG 20): M14 Tool holder short spindle: MT2 Throat: 190mm Spindle stroke: 80mm Column diameter: 65mm Feed: Manual Phjdpjx Nn Sgofx Aa Esa Drive: Infinitely variable Drive motor: 750/1,500 rpm, 0.37/0.55kW Spindle speeds: 225–4,300 rpm Operating voltage: 400V/50Hz

Condition: excellent (used), mileage: 19,617 km, first registration: 05/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, suspension: steel, Year of construction: 1992, = Other options and accessories = - Power take-off (PTO) = More information = General information Cab: double Technical information Number of cylinders: 6 Axle configuration Suspension: leaf spring Front axle: steered Rear axle: twin tires Dimensions Dimensions (L x W x H): 676 x 248 x 300 cm Phedpfxsvrkcbs Aa Eea Weights Empty weight: 6,750 kg Payload: 6,250 kg GVW: 13,000 kg Condition Technical condition: very good Visual condition: very good More information Contact Thierry Leemans for more information.

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Phsdox Anaujpfx Aa Eja Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, Colombo dowel boring machine 2 vertical axes, 11 kW each Pjdpfx Aaex Dnl Ts Ejha 2 dowel heads, 3 kW each Weight 3500 kg 35 kW, 400V/50 Hz Year of manufacture 2001

Condition: used, mileage: 630,000 km, power: 338 kW (459.55 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2025, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, * NET TOP PRICE * Engine with rod bearing failure, Engine still starts!!! * Broken Engine with rod bearing failure, Engine still starts!!! * XXL cab with 2 beds * ACC distance warning system * Leaf / air suspension * Emergency brake assist * Hill start assist * ZF Intarder * 2tanks * Cool box * Auxiliary air conditioning * Sun visor Phodpfxjx En Imo Aa Eja * German vehicle * Very good condition WhatsApp: Errors and prior sale reserved !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english - Mówimy po polsku

Condition: good (used), Year of construction: 2011, Ruli folding bench 6020 / A Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Phodpfxsvb Nnhs Aa Eoa Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: new, functionality: fully functional, mileage: 3,000 km, power: 206 kW (280.08 HP), fuel type: diesel, overall weight: 15,000 kg, tire size: 14.00 R 20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, brakes: engine braking, color: beige, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, NEW VEHICLE CHASSIS without first registration! Special approval for registration available! *WARRANTY EXTENSION to 5 years from first registration optionally possible! In addition to the standard equipment, the following factory options are installed. Differential lock on the driven front axle Rear axle ratio i = 5.72 Spare wheel, dimension corresponds to chassis tires Batteries 170 Ah for Eurocargo Battery disconnect switch mechanically on the chassis, mounted on the battery box Generator 2880 watts (24 volts x 120 amps) Voltage converter 24/12 volts (10.5 amps) Preparation for toll system (OBU), includes third DIN compartment, antenna and wiring on the dashboard, without receiver Front & ramp mirrors are manually adjustable but heated Luxury passenger seat, 4-way adjustable, air-suspended, integrated headrest and seat belt, heated, lumbar support Compressed air connection in engine tunnel console Electronic immobilizer and 3rd vehicle key Luxury driver's seat, air-suspended, heated, multi-adjustable, lumbar and headrest, with integrated 3-point safety belt Iveco radio DAB+, Bluetooth, integrated microphone, mini USB / AUX-in connection, LCD display Air conditioning with manual control Phsdpevtwyvjfx Aa Eja Multifunction steering wheel with steering wheel control Pollen filter for driver's cab Rear view mirror for body width 2500 mm Windshield and side windows tinted Protective grille for headlights Sun blinds for side windows, driver and passenger side Sun protection filter integrated in windshield Diesel/air auxiliary heating with timer (Eberspächer, AirTronic D2) heat flow 2.2kW Preparation for rotating beacons Trailer socket for 12 volt operation, 13-pin Trailer socket for 24 volt operation, 15-pin Adaptation of exhaust tailpipe for fords Fuel tank in plastic design, with 200 liter capacity, lockable Fuel pre-filter type Racor with separator, heatable Air tank in aluminum design, number depending on suspension version and trailer version Parabolic spring on the front axle Parabolic suspension on the rear axle End cross member for central axle trailer, D = 190 kN Exhaust tailpipe on the left side CAN bus interface "CAN-OPEN" for body control Air compressor 360 cc, recommended for trailer operation with continuous braking system MICHELIN XZL+ 14.00 R 20 off-road Color: light ivory, IC 074, similar to RAL 1015 Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale reserved! Pictures may contain optional extras at an additional cost! Delivery date by arrangement! Viewing by appointment only! Address only office address, not vehicle location! Our general terms and conditions apply!

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube Phsdpsxxuytsfx Aa Esa - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2230x720x280 mm Weight 135 kg Podpsv A Hxmsfx Aa Ejha Total power requirement 0 kw

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Podpfx Aox A Safsa Eeha Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: used, mileage: 565,000 km, power: 338 kW (459.55 HP), first registration: 07/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, * NET PRICE * Engine damage / Broken engine * XLX cab with 1 bunk * ACC adaptive cruise control * Leaf / air suspension * Emergency brake assist * Hill start assist * ZF intarder * 1 tank * Cooler box * Sun visor * German vehicle WhatsApp: Errors and interim sale reserved!! Sale is made under exclusion of any warranties!! - We speak Russian - We speak English - We speak Polish - We speak ... Pedpfxex En Iae Aa Eeha - We speak Spanish

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Pedpfx Asc Uydaoa Eeha Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: good (used), axle configuration: 3 axles, first registration: 08/2014, total length: 14,000 mm, total width: 2,600 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,910 mm, color: white, Year of construction: 2014, Equipment: ABS, = Additional Options and Equipment = - Rear doors - Refrigeration / Deep-freeze unit Phjdex An Rgopfx Aa Eoa - Air suspension = Notes = Vogelzang Thermoking SLXe 400 Frigo - Low engine hours Model year: 29-8-2014 XL9148261EB532261 Box dimensions: 13.49 x 2.46 x 2.55 m Diesel hours: 3,620 Electric hours: 2,754 Dutch trailer Refrigeration unit brand: Thermo King = Further Information = Axle configuration Tire size: 385/65R22.5 Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 9,140 kg Payload: 33,860 kg Gross vehicle weight: 43,000 kg Functional Cooling: 20 °C to -20 °C Body manufacturer: Thermoking SLXe400 Refrigeration engine: Diesel and electric (3,620 diesel hours; 2,754 electric hours) Condition Technical condition: good Visual condition: good Identification License plate: ON-19-KS Further information Please contact VAEX The Truck Traders for more information.

Condition: new, Year of construction: 2020, power: 380 kW (516.66 HP), fuel type: diesel, CPL: 8471 Approx. weight in kg: 835 kg Phjdpfxoxgdglo Aa Eea Dimensions LxWxH: 120x90x115

Condition: like new (used), Year of construction: 2018, 1 x bench drill Flott TB 10 Eco Pjdpfx Aasx Nbmde Ejha Year of manufacture: 2018 In like-new condition. (Further photos and description to follow)

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Phjdovtp Uxspfx Aa Eja Manufactured in 2001, it was revised in 2013. Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm

Condition: used, mileage: 402,000 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, * NET PRICE * ENGINE DAMAGE / ENGINE BROKEN * XLX cab with 2 beds * ACC distance warning * Leaf / air suspension * Emergency brake assist * Hill start assist * ZF intarder * 2 tanks (580l/580l) * Refrigerator box * German vehicle * Very good condition WhatsApp: Errors and interim sales excepted! Sale takes place with exclusion of any warranties! - We speak Russian - We speak English - We speak Polish Phjdpfjx En Igsx Aa Eja

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm Podpewq Ea Refx Aa Eeha - Weight approx. 70 kg Location: ex stock 54634 Bitburg - available immediately -

Condition: excellent (used), Vötsch Type: VTS 7060-5 Halogen Bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature change rate cooling: 6 K/min Temperature change rate heating: 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Sound level at 1m distance (free-field measurement): < 69 dB(A) Left side port: 50 mm diameter Right side port: 2 x 125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 16 kW, Rated current: 30 A Circuit breaker, customer-provided: 29 A slow-blow Chamber is water-cooled Refrigerants: R-404A and R 23 Phjdpfx Ajxw Uqpja Eoa Weight approx. 675 kg For your safety as the buyer, please note the following information! The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legal, compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: new, Year of construction: 2020, power: 380 kW (516.66 HP), fuel type: diesel, CPL: 8471 Approx. weight in kg: 835 kg Dimensions LxWxH: 120x90x115 Phodpfx Aoxgd Nmja Eja

Condition: used, Straight-Cut Cutting Bench 40, manufactured by MEP Number of bars: - n.1 Ø 40 - n.2 Ø 32 - n.3 Ø 26 - n.4 Ø 20 - n.5 Ø 16 22 Fy= 600 N/mm - ft= 650 N/mm Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Pedpsvtx Eysfx Aa Eoha Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5