Bench drill

FEHLMANN P18S

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Fpodjxgdr Iepfx Afnsc

Condition: new, Model Name Airtower FT 20.000 Fpodpfx Afjgvqzconoc

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle Fedpfxovbifgo Afnopc >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: new, Cutting range: Fjdpfx Asilk H Tsfnopc round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 Fodst Ipi Ispfx Afnspc with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 85 - 1800 U/min feeds 0,1 - 0,2 - 0,3 mm/U Fsdpfefv H H Hex Afnjpc total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. range L-W-H 965 x 515 x 1920 mm

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Fsdpfomdn Dxox Afnspc

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Fpodoma Snxspfx Afnjc

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) Fpjdpfxjby Stpe Afnec NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: Fodsbnfxuepfx Afnspc - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions