Used Engine Test Bench for sale (25,939)

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening Rjdpfxjttg S Uo Acver • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Rodpjrt U Nuefx Acver Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2022, operating hours: 320 h, condition: as good as new (ex-display), functionality: fully functional, working width: 2,100 mm, type of cooling: water, working length: 6,000 mm, machine/vehicle number: Serien Nr.000025, World first: Meltio has reinvented 3D laser printing with this machine. With this unit, you can use welding wire and the corresponding 3D data to produce any conceivable component made from metallic materials. (see photos) We are a specialist dealer for welding technology and operate an application center for laser welding technology. The machine offered is located in this application center. Meltio Engine – 1.2 kW laser power, 976 nm wavelength, multiple 200W direct diode lasers – power supply 400V with 2-5kW. Equipped with active water cooling. Rodeyk D T Uspfx Acver For wire diameters 0.8-1.2 mm. Advanced control module for equipping existing robotic systems with Meltio technology. 390x660x1000 mm – 90 kg. Transform any motion platform into a metal 3D printing system, subject to size restrictions. Meltio Engine Dual Wire – dual-wire welding system for different materials in the welding head. Meltio Engine Hot Wire – inductive wire preheating. Meltio powder feeder, 2x with USB connection. Can be used individually. Enables users to calibrate the Meltio multi-laser deposition head precisely and effortlessly before each print. KUKA KR30 with 2100 mm reach, 6-axis robot including KRC4 controller and robot control panel – rated payload: 30 kg KUKA DKP400 turn-tilt table – load capacity 400 kg 3 m linear axis for the robot (can also be omitted) The area must be designed to be laser-safe; partitioning or construction works are not included in this offer. No manufacturer’s warranty; the system will be delivered in working condition, spare parts availability is guaranteed. The complete systems are CE certified.

Condition: good (used), Hardness tester functional Redoydlf Sopfx Acvsr

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry Rjdpsxmv H Rjfx Acvjr - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Determination of compressive strength Redpfx Aoxb Nv Ujcvjr

Condition: excellent (used), Double bench grinder Redpfxok Iwx Ej Acver

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, wheel diameter: 400 mm, overall weight: 4,000 kg, distance between centers: 550 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens 840 D, TECHNICAL DETAILS Max. wheel diameter: 400 mm Workpiece diameter: 36–400 mm Centre distance: 135–290 mm Max. spindle speeds (infinitely variable): 3,000 rpm Centre width: 100–550 mm MACHINE DETAILS Control: CNC Siemens 840 D Dimensions & Weight Space requirement: approx. 2,000 x 3,055 x 2,788 mm Machine weight: approx. 4,000 kg Rjdsywg Hxspfx Acver EQUIPMENT Single-flank rolling test Double-flank rolling test Structure-borne noise testing Helical contact testing (double-flank contact) Use of up to 6 test carriages Highest test accuracy and repeatability Machine table with workpiece drive Swivelling pneumatic unit Spray lubrication (Type: Vogel) Oil mist extraction (Type: Elbaron)

Condition: not inspected (used), Year of construction: 1999, machine/vehicle number: 55194, functionality: unexamined, drilling depth: 16 mm, rotational speed (max.): 2,580 rpm, table width: 230 mm, table length: 230 mm, spindle stroke: 80 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Drilling capacity: 16 mm Spindle travel: 80 mm Speed: 120 – 2,580 rpm Table dimensions: 230 x 230 mm MACHINE DETAILS Rodpfx Acsyr Hr Novjr Connected load: 650 W Operating voltage: 400 V Dimensions & weight Dimensions (L x W x H): 650 x 350 x 960 mm Weight: 70 kg External reference: 29

Condition: not inspected (used), functionality: unexamined, drilling depth: 100 mm, rotational speed (max.): 4,500 rpm, table width: 220 mm, table length: 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the purchaser to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Rjdpfxoynimbs Acvor TECHNICAL DETAILS Spindle speed: 220 – 4,500 rpm Drilling depth: 100 mm Table dimensions: 280 x 220 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 540 x 400 x 1,600 mm Machine weight: 300 kg External reference: Lot 1 / Training workshop

Condition: used, This listing is for the PTI Veripac P425 M5 Integrity Testing System. The unit is in full working condition and ready for immediate use. Designed for non-destructive leak detection using vacuum decay technology, it ensures packaging integrity for pharmaceutical and medical applications with precise, repeatable results. Rsdpfxeyyqa Is Acvjr Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Dimensions (LxBxH): 170 x 65 x 160 cm Price: On request - Details: - └ Description: Roller width 1050mm - Documentation available: No Rjdoyymxyspfx Acvjr - CE certificate present: No - Voltage [V]: 220 - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,690 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,910 mm, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 33,479 kg, Own weight: 8,521 kg, Gross weight: 42,000 kg, Type of chassis: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year of manufacture: 2015, Refrigeration unit manufacturer: Schmitz Cargobull, Refrigeration unit model: tkm, Refrigeration unit: Diesel/electric, Electric unit hours: 96, Diesel unit hours: 9,885, Wall thickness: 45 mm, Axle type: SCHMITZ, Tail lift, Tail lift type: under-slung tail lift, Tail lift capacity: 2,000 kg, Tail lift manufacturer: d hollandia, Tail lift material: Steel and aluminum, Tail lift size: 170x240 = Further Information = General Information Cab: Day cab Registration: ON-98-PY Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Redpfsvu Rxuex Acvor Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 13 mm; Right tyre tread: 15 mm Axle 2: Left tyre tread: 5 mm; Right tyre tread: 8 mm Axle 3: Left tyre tread: 10 mm; Right tyre tread: 10 mm Weights Unladen weight: 8,521 kg Payload: 33,479 kg GVW: 42,000 kg Functional Tail lift: d hollandia, retractable flap, 2,000 kg Refrigeration unit: Diesel and electric (9,885 operating hours diesel; 96 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers for used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our stock includes all European brands, years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Reliable business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) number plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And more… Please visit our website for special offers and for the complete stock. Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system Redpfxsyyw E Rs Acvsr - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Rsdeyyvwxspfx Acvjr Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units Rsdpfx Aoyyvrvscvsr - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Version: water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with extended safety features for battery and accumulator testing (e.g. lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning device for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and testing environments (subject to a customer-provided safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system allows for temperature and humidity testing across a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and service life testing - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g. lithium-ion) under defined climate conditions (subject to customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel, programs can be stored and automated. The system was in operation until recently and is fully functional. General information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Redeyyu Rqspfx Acver Condition: used, functional CE marking: available Made in Germany Control system: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % RH Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3,300 × 5,000 × 2,500 mm Internal dimensions (W×D×H): approx. 3,000 × 2,200 × 1,500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see image) (Change and errors in technical details and specifications excepted!) For further questions, please feel free to contact us by phone.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, total height: 3,800 mm, total length: 7,000 mm, total width: 5,550 mm, table length: 1,600 mm, table width: 1,200 mm, table height: 965 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, overall weight: 26,500 kg, LAGUN BM 3RT Bed Milling Center with Rotary Table – Available at Short Notice Rodpeq I Ncqofx Acvsr The LAGUN BM 3RT is a highly rigid bed-type milling center with a rotary table, designed for heavy-duty and precise machining. Ideal for single-part manufacturing as well as series production with the highest demands on rigidity, accuracy, and reliability – and all this without the need for expensive foundation work. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts direct from JMT ✔ Leasing / financing options available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain's leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the manufacture of bed-type milling machines. These machines are known for their high reliability, ease of maintenance, and economic operation. Technical features: Control: HEIDENHAIN TNC 640 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: 40-position chain magazine with double gripper Chip removal: Double hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your benefits with JMT: ✔ Official LAGUN sales partner in Germany ✔ On-site technical support and service ✔ Prompt spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and prepare an individual offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TM 4 T-Type Travelling Column Machining Centre Rsdpfx Ajq I Nkbscvjr The LAGUN TM 4 is a highly rigid T-type travelling column machining centre designed for heavy-duty and precise milling applications. It is ideal for both single-part production and serial manufacturing where maximum demands for rigidity, accuracy, and reliability are required. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts supplied directly through JMT ✔ Leasing / financing options available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain's leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in bed-type milling machine manufacturing. These machines impress with their reliability, ease of maintenance, and cost-effective operation. Technical specifications: Control: HEIDENHAIN TNC 640 CNC path control + 19" TFT monitor HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Through-spindle coolant supply (IKZ) at 36 bar Tool changer: 60-pocket chain magazine with dual gripper Chip disposal: Double hinged belt conveyor (front and rear) Enclosure: Full (perimetric) enclosure Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and commissioning included ✔ Reference machines available in Germany Contact us – we are happy to advise you and provide an individual quotation.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TL 4 T-Design Travelling Column Machining Centre The LAGUN TL 4 is a highly rigid, T-frame machining centre designed for heavy-duty and precise machining operations. Ideal for both single-part and series production, meeting the highest standards for rigidity, accuracy, and reliability. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Lease-purchase / financing options available ✔ No special foundation required (standard industrial flooring is sufficient) ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (part of MAHER HOLDING), renowned for robust construction, high dynamics, and decades of experience in the field of bed milling machines. These machines stand out for their high reliability, ease of maintenance, and efficient operation. Technical specifications: Control: HEIDENHAIN TNC 640 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Internal coolant supply (IKZ) 36 bar Rodeq I Nlyepfx Acvsr Tool Changer: 60-position drum magazine with double gripper Chip disposal: Dual hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimetric) Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailored offer.

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2026, Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Gearbox: ZF TraXon, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Tyre tread left: 100%; Tyre tread right: 100%; Suspension: Parabolic suspension Rear axle: Tyre size: 315/70R22.5; Max. axle load: 13,000 kg; Tyre tread left: 100%; Tyre tread right: 100%; Suspension: Air suspension Condition Overall condition: very good Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: Geen Rsdpoyypqrsfx Acvsr

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2026, Availability Stock status: Expected soon Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Transmission: ZF TraXon, 12 speeds, automatic Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Tread depth left: 100%; Tread depth right: 100%; Suspension: Parabolic spring Rear axle: Tire size: 315/70R22.5; Max. axle load: 13,000 kg; Tread depth left: 100%; Tread depth right: 100%; Suspension: Air suspension Condition Rsdpfx Asyypdlocvjr Overall condition: very good Technical condition: very good Optical condition: good Damages: none Warranty Warranty: None

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm Redpfeya Eqaex Acvor max. module --- min. module --- Control --- total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: good (used), mileage: 521,562 km, power: 188 kW (255.61 HP), first registration: 12/2019, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,650 mm, total width: 2,550 mm, total height: 3,680 mm, loading space length: 7,480 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Tail lift - Manual - Radio/Cassette - Reversing camera - Lane departure warning system Rjdpfsyi S T Hox Acvor - Fabric - Xenon lamp - Central lubrication Number of axles: 2, configuration: 4x2, payload: 4111 kg, unladen weight: 7879 kg, gross weight: 11990 kg, total fuel tank capacity: 300 liters, fifth wheel: fixed, central lubrication, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, reversing camera, lighting type: xenon lamp, speed limiter, lane departure warning system, seat heating, Bluetooth, engine power: 188 kW (252 hp), fuel type: diesel, Euro 6, transmission type: Optidriver, speed limiter, gears: 6, power steering, ABS, ASR, starter battery, central locking, seats: 2, seating arrangement: 1+1, seat upholstery: fabric, seat adjustment: manual, tail lift, tail lift type: rear flap, tail lift capacity: 1500 kg, tail lift manufacturer: Dhollandia DHLM.20, tail lift material: steel, tail lift size: 175 x 250, NEW ENGINE 10 TKM / 14.3T TECHNICAL, 11.9T PERMITTED, spare wheel, spare wheel tread: 5% Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; left tire tread: 7 mm; right tire tread: 7 mm; suspension: leaf spring Axle 2: twin tires; steered; left inner tire tread: 6 mm; left outer tire tread: 7 mm; right inner tire tread: 6 mm; right outer tire tread: 7 mm; suspension: air suspension Weights Unladen weight: 7,879 kg Payload: 4,111 kg Gross vehicle weight: 11,990 kg Functional Tail lift: Dhollandia DHLM.20, rear flap, 1,500 kg Platform height: 103 cm Condition Technical condition: good Cosmetic condition: good Damages: none Number of keys: 1 Financial information Lease price: €333 per month (default, 60 months); Please inquire for further information and conditions Identification Registration: 46-BPD-4 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive pricing • Fair business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Professional technical services • The assurance of “recognizable quality” • And much more... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask us directly about our European warranty package.

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 00127634, functionality: fully functional, High-speed bench drill, Made in Germany - Clamping table: 290 x 225 mm - Travel: 150 mm with hand crank - Spindle fitting: Drill chuck included - Drilling capacity in steel Ø 1 - 6 mm - Throat depth: 180 mm - Speeds: 900 - 10,000 rpm, 8 steps - Column: diameter 75 mm - Spindle stroke: 60 mm, with fine stop - Voltage: 380 V - Dimensions: 640/330/H740 mm - Weight: 92 kg Rjdpfoyx Dzpsx Acvor