Bench drilling machine

OPTIMUM OPTigrind GH 20 T

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Itedpfx Akjht Rl Eopjn Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 26230 Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs are to be covered by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Ijdoy Drkcopfx Akpstn Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Itodpfxod Id Ugs Akpon Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm Isdpfx Asfg Rlaokpetn · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Itodpfoharwvsx Akpen Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: ready for operation (used), Width: 1000 mm Isdegq Nawopfx Akpotn Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Weight:

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Ijdpfx Ajtqdqgjkpetn Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: reconditioned (used), Steel grinding machine Manufacturer: REMA Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm Ijdpfx Akehvu Tmepjtn with mounting flange - Operating manual Used, as is, no guarantee

Condition: excellent (used), Year of construction: 2020, The Canon Arizona 1360 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: 2020 Mileage: 25.000m² only! Print head status: perfect Print area: 3,08x2,50 meters Roll option: not available In production, demo possible Location: Western Europe Iodoylwhnjpfx Akpetn For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Year of construction: 1985, condition: used, 1 used engraving machine Manufacturer: KUHLMANN Type: GM I-I Working area: 320 x 200 x 280 Stencil table: 500 x 400 mm Work table: 500 x 200 mm 3D form engraving attachment TGV plate engraving attachment Various stencils and type sets Various engraving tools Itedpfx Akek Tt Axjpen Speed range: 4,200 – 20,000 rpm Space requirement: approx. 1.2 x 1 x 1.5 m Weight: approx. 250 kg