Used Barrel for sale (227)

Condition: good (used), • MAFO barrel washer.. • Total dimensions : • Length : 721cm. • Width : 140cm. • Height : 230cm. • Opening : • Width : 60cm. • Heigth : 74cm. • Inlet conveyor: • Length : 200cm. • Width : 200cm. Kodpfx Aod Ixw Uenwedn • INDAUK.

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 310 mm -Width: 82 mm Kdedpfxsb A Ip Aj Anwen -Inner diameter: 200 mm -Weight 22.8 kg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Version: cc/w33 -d= Inside: 220 Kodpob A Imwefx Anwjdn -D = Outside: 340 -B = Width: 90 -Weight: 30 kg

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Kdodjypat Ispfx Anwen Extension 3 m without support beam Chip collection box

Year of construction: 2025, condition: excellent (used), functionality: fully functional, We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 Ksdpfx Ajxxim Ionwjdn • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: ready for operation (used), Year of construction: 2007, operating hours: 62,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 70 mm, displacement volume: 1,077 cm³, Clamping unit: Clamping force 2500 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1877 bar Stroke volume 1077 ccm Shot weight (PS) 980 gr. Injection rate 385 ccm/s Screw speed 220 1/min Plasticising rate max. 76 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Kjdpozfpthofx Anwjdn Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 74,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, displacement volume: 1,237 cm³, injection pressure: 1,635 bar, Clamping unit: Clamping force 3000 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Ksdpfx Anozfarhjwedn Injection unit: Screw diameter 75 mm Ls/D ratio 18,7 Injection pressure 1635 bar Stroke volume 1237 ccm Shot weight (PS) 1126 gr. Injection rate 442 ccm/s Screw speed 220 1/min Plasticising rate max. 87 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Kodpozd Smbjfx Anwjdn Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1490 bar Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Kdedpfxozd Er Re Anwen Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ksdpfx Anoymn Nfewjdn Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping unit: Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 720 x 670 mm Distance between tie bars (h x v) 470 x 420 mm Mould opening stroke 500 mm Kodpfx Anozd Amxewsdn Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 8-fold water distributer - BluePower - Krauss Maffei Robot SPX10 Additional Options: - 1 x Air valve - 1 x hydr. core pull - Robot interface according to Euromap 67 - 8 x hot runner controller

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, Clamping force 500 kN Mould opening force, max. 39 kN Travel force movable platen opening 22 kN Travel force movable platen closing 17 kN Size of mould platens (h x v) 600 x 600 mm Distance between tie bars (h x v) 370 x 370 mm Mould opening stroke 400 mm Mould height min 200 mm Max. daylight 600 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 54 gr. Injection rate 59 ccm/s Screw speed 365 1/min Plasticising rate max. 8,5 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 11 kW Installed heating capacity 8 kW Adjustable barrel heating zones 5 Reservoir capacity 180 ltr. Dimensions and weights: Dimensions of the machine ca. 3,50 x 1,40 x 2,00 m Total machine weight 3000 kg Accessories: - Anti vibration pads - 6-zones water distributer - Krauss Maffei Robot SPX10 Kedpozdrcijfx Anwjdn Additional Options: - 1 x hydr. core pull on movable plate - 1 x airvalve - 6 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2017, condition: ready for operation (used), travel distance X-axis: 900 mm, controller manufacturer: SIEMENS, controller model: SINUMERIC TOUCH DITTLE control, overall weight: 40,000 kg, total width: 2,700 mm, total height: 2,500 mm, spindle motor power: 31,000 W, product length (max.): 11,500 mm, spindle speed (max.): 2,000 rpm, number of axes: 4, This 4-axis WALDRICH KLEINKNECHT WS III C 6.00 X 5000 CNC was manufactured in 2017. It features a maximum grinding length of 5,000 mm and a roll diameter capacity of approximately 600 mm. The machine is equipped with a modern CNC control system and includes essential safety equipment. If you are looking to get high-quality grinding capabilities, consider the WALDRICH KLEINKNECHT WS III C 6.00 X 5000 CNC cylindrical grinding machine we have for sale. Contact us for further details. Kdodpfxezcniks Anwen - Control Voltage: AC 230 V 50 Hz, DC 24 V, AC 24 V- Network System: TN- Mains Voltage: 3 AC 400 V ±5%- Mains Frequency: 50 Hz ± 1%- Solenoid Valve Voltage: DC 24 V- Coupling Relay Voltage: DC 24 V- Control Voltage for Monitor and PCs: AC 230 V 50 Hz- Ambient Temperature: > 5 and < 35°C- Relative Humidity: < 85%- Altitude: < 1000 m above sea level- Noise Level (Machine): < 75 dB (A)- Max. Grinding Diameter (with Ø 915 mm grinding wheel): 1,100 mm- Min. Grinding Diameter (with new grinding wheel 915 mm): 0 mm- Min. Grinding Diameter (with abraded grinding wheel 580 mm): 300 mm- Max. Workpiece Weight (in steady rests, limited by headstock framework size): 6,500 kg- Max. Workpiece Length (retracted faceplate): 5,450 mm- Center Height: approx. 750 mm- Max. Clearance Width (retracted faceplate and tailstock quill): 5,450 mm- Barrel Length: 5,150 mm- Connected Load: approx. 200 kVA (Connection power listed as 123 kW)- Machine Length: approx. 11,500 mm[- Machine Width: approx. 2,700 mm- Machine Height: approx. 2,500 mm- Machine Weight: approx. 40,000 kg- Headstock Motor Power: 22 kW- Headstock Drive: V-belt- Headstock Torque: 208 Nm- Headstock Speeds: 1-100 min⁻¹- Tailstock Center Sleeve Taper: Metric 80- Tailstock Movement: Motorized- Tailstock Clamping: Spring clamping cylinder- Tailstock Quill Travel: 270 mm- Tailstock Quill Movement: Manual and motorized- Z-Axis (Longitudinal Axis) Max. Speed: 0-6,000 mm/min- Z-Axis Motor Type: Siemens 1FT7- Z-Axis Rated Torque: 28 Nm- Z-Axis Stall Torque: 50 Nm- Z-Axis Motor Speed: 3,000 min⁻¹- X-Axis (Infeed Axis) Speed: 0-1,000 mm/min- X-Axis Motor Type: Siemens 1FT7- X-Axis Rated Torque: 3.7 Nm- X-Axis Stall Torque: 6.0 Nm- X-Axis Motor Speed: 6,000 min⁻¹- X-Axis Travel: 900 mm- X-Axis Infeed Accuracy: 1.0 µm- U-Axis (Eccentric Spindle) Speed: 50 mm/min- U-Axis Motor Type: Siemens 1FT7- U-Axis Rated Torque: 2.0 Nm- U-Axis Stall Torque: 3.5 Nm- U-Axis Motor Speed: 6,000 min⁻¹- U-Axis Travel: 3.0 mm- U-Axis Max. Crown (Radius): 1.5 mm- U-Axis Infeed Accuracy: 0.1 µm- Grinding Spindle Motor Type: Siemens 1PH8165-1DD00-2FA1- Grinding Spindle Motor Power: 31 kW (Optional upgrade to 71 kW motor at 1000 min⁻¹ and 673 Nm supported)- Grinding Spindle Motor Speed: 1,350 min⁻¹- Grinding Spindle Speed: 80-2,000 min⁻¹- Grinding Spindle Motor Torque: 257 Nm- Max. Cutting Speed (with corundum wheels): 45 m/s- Max. Cutting Speed (with CBN wheels, min. diameter 700 mm): 65 m/s- Grinding Wheel Max. Diameter: 914 mm- Grinding Wheel Min. Diameter: 580 mm- Grinding Wheel Bore: 508 mm- Grinding Wheel Max.

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. Kedpfx Aoy N Sqmenwedn • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm Kodpfjydnp Hsx Anwjdn • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, II. choice Kodpek Nmmhofx Anwodn Manufacturer: SSI Schäfer Volume: 770l Total width: approx. 1.350 mm Total depth: approx. 1.115 mm total height: approx. 1.470 mm Material color barrel: black Material color lid: green tires: 4 tires (2x braked) Dead weight: 68 kg Remark: Useful width and depth are tapered towards the bottom. General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Year: 2004 Kjdpfow Uaw Dex Anwsdn Operating hours: 32,000 New screw and barrel

Year of construction: 2014, condition: used, Leistritz ZSE 60 MAXX-36D Extrusion Line (2014) comprising Koch Technik and Scholz Dosiertechnik feeding system dosing units Leistritz ZSE 60 MAXX-36D twin-screw extruder with 2x 60mm diameter screws 36:1 L/D ratio, co-rotating 8-barrel housing section, electrically heated and water-cooled 2 degassing ports 1200 rpm maximum screw speed 495kW motor with Flender direct-driven gearbox Free-standing control panel with microprocessor and interconnecting wiring BD Plast BDL double screen changer Ettlinger ERF 200 melt pump Econ EUP 600 pelletizer Stainless steel water bath incl 2x sifters on legs Kdodpfozb N Hzsx Anwon Tredkamp 1C-T 10,000L stainless steel mixing silo Motan 14,000L mixing silo on legs with elevator Big bag system

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts Kdsdpfjzbvqtox Anwen - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction description? Truck with trailer (MAN, beverage body) Kedpfjy Nuqpex Anwsdn General The vehicle is a MAN truck with beverage bodywork, including a trailer combination. The truck is configured as a drawbar combination (tractor unit + trailer) and is primarily used in beverage transport applications. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Large sleeper cab, suitable for long-haul transport * Interior features: * Multifunction steering wheel with integrated controls * Clearly arranged dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, sleeper berth behind the seats 2. Body (truck + trailer) * Type: Beverage body / box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), provides daylight for loading/unloading * Internal floor: Durable wooden floor, heavily used, suitable for roll carts, pallet jacks, or pallets 3. Trailer * Type: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates or barrels * Large cargo volume due to combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Spacious cargo area with reinforced floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction description? Truck with trailer (MAN, beverage body) General The vehicle is a MAN truck with beverage bodywork, including a trailer combination. The truck is configured as a drawbar combination (tractor unit + trailer) and is primarily used in beverage transport applications. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Large sleeper cab, suitable for long-haul transport * Interior features: * Multifunction steering wheel with integrated controls * Clearly arranged dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, sleeper berth behind the seats 2. Body (truck + trailer) * Type: Beverage body / box body * Material: Aluminum/composite construction, insulated Kodpfx Ajw Ii A Nenwjdn * Roof: Translucent tarpaulin roof (visible from inside), provides daylight for loading/unloading * Internal floor: Durable wooden floor, heavily used, suitable for roll carts, pallet jacks, or pallets 3. Trailer * Type: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates or barrels * Large cargo volume due to combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Spacious cargo area with reinforced floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,700 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction description ? Truck with trailer (MAN, beverage body) General The vehicle is a MAN truck with a beverage body and trailer combination. The truck is designed as a drawbar combination (rigid truck + central axle trailer) and is primarily used in the beverage transport sector. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA Kdodpfx Ajx R Rcwsnwjn * Axle configuration: 6x2 * Cab: Large space sleeper cab, suitable for long-distance haulage * Interior equipment: - Multifunction steering wheel with controls - Clear dashboard with analog round dials - Air conditioning and ventilation system - Passenger seat, sleeping bunk behind the seats 2. Body (Rigid truck + trailer) * Body type: Beverage body/box body * Material: Aluminum/Composite construction, insulated * Roof: Translucent tarpaulin roof (interior visible), ideal for daylight use during loading/unloading * Interior floor: Robust wooden floor, heavy-duty, suitable for trolleys, pallet trucks, or pallets 3. Trailer * Type: Central axle trailer, also with beverage body * Axles: 2 axles 4. Intended use * Mainly for transporting beverages in crates and barrels * Large loading volume due to truck and trailer combination * Easily accessible from the side and rear for fast loading/unloading 5. Special features * Clean interior * Spacious loading bay with sturdy flooring * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 06/2028, total length: 1,010 mm, total width: 630 mm, total height: 1,220 mm, input frequency: 50 Hz, type of input current: three-phase, power: 4 kW (5.44 HP), electrical fuse: 16 A, Spiral kneader Model: SP 50 T Kneading machine with sophisticated and robust technology! for the best kneading results! Digital easy touch control with rewind key Dough machine with 3 timers 1 mixed speed and 2 forward speeds for min / max. 6 - 50 kg of dough Flour dust hood with steamer Stainless steel kettle and spiral Kettle left and right barrel Mobile machine with 4 brakes DGUV V3 tested Connection 400V, 4 kW, 16A-CEE plug Kedpfx Ajhfha Donwsdn Dimensions: 630 x 1010 x 1220 / 1600mm, WxDxH With a 24 month warranty Visit our large bakery machines warehouse!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. Kdsdpfxjrivv Ej Anwen At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Kjdpsyhcghefx Anwodn Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.