Used Barrel for sale (227)

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Lsdpoh U Rznjfx Amrjac Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Laodpfoyhcghjx Amroc Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain Lsdpfjp E Eglsx Amrjac

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm Lajdpfx Amep E Ed Roroc speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: used, first registration: 07/1980, color: grey, gearing type: mechanical, suspension: other, , Otto Klein water barrel vacuum barrel capacity 4.000 l year of construction 1980 suction hose pump overhauled hydraulic opening/closing immediately ready for use FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE For further questions please contact Mr. Faller at the number. //*EXCHANGE, PAYMENT ACCEPTANCE OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Laedpst Aikusfx Amrjc

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Ljdpfxoyhbt Hj Amreac Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor Laodpfx Aeu Idvwsmrec - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Lodpeu Idxfefx Amreac Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle Lodsu Idv Dspfx Amreac - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles Lsdsu Idwbopfx Amreac - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. Lsdju Idxropfx Amroac - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Year of construction: 2001, condition: used, The line is suitable for high-quality mono film production with automatic thickness control, IBC cooling, and full surface treatment capability. Single-layer blown film extrusion line based on a 120 mm extruder with a 30:1 L/D ratio and water-cooled grooved feed section. Die Head • Model: TE594 Lodpfx Amszcz Rujrsac • Die diameter: 350 mm • Die gap: 1.5 mm Metering System • 4-component gravimetric system (Octagon configuration) Cooling & Control • Plast-Control GmbH Procon automatic air ring & profile control • K-Design GmbH USBC-4-G2 IBC with WR-4 width control Corona Treatment • AFS G100S • Double treater station, 2600 mm width Take-up & Winding • 2800 mm take-up and winding unit • Oscillating take-up with gusset boards • Erhardt+Leimer GmbH web guiding system • 3” and 6” air shafts Recently replaced (less than 12 months of use, original Macchi parts): • Main motor • Gearbox • Screw & barrel • Mixing tip • Grooved feed section

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Lsdpfx Amjzb Ab Esrjac Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 Lsdjyyz Ddjpfx Amrjac L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Laedpov Stbmsfx Amrec Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: used, oil 10W30 fully synthetic Duramax Barrels with 20 liters Cevoman bvba. Lenskensdijk 5 Lodpfjy R Ntuox Amrjac 2200 Herentals Belgium

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Ledpfx Aexhfuaomreac Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation Lodpfxszc N Axs Amroac 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas Lajdpfxst Nfaro Amrec • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Laodpoy Abclsfx Amrjc Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 1998, condition: used, Manufacturer : Clextral Model : BC 45 Year : 1998 Type: Twin-screw extruder Laodpfsyzt Ukex Amrjc Previous application: Food processing – Cooking and extrusion AC motor: 25 kW Length of screw/barrel: 1800 mm Screw elements: nominal diameter 55 mm. L/D : 33 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 1990, condition: used, Manufacturer : Clextral Model : BC 45 Year: 1990 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire DC motor: 21 kW Length of screw/barrel: 1500 mm Ledeyzt Udopfx Amrsac Screw elements: nominal diameter 55 mm. L/D : 27 Included in the package: Granulator, water pump and control panel Peripheral equipment not included but available on request: Dosing unit. (Its integration may be subject to a feasibility study and a supplementary quotation.)

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec Laedpfxjttxg Is Amrec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Year of construction: 1999, condition: ready for operation (used), travel distance X-axis: 275 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 2, Cylindrical grinding machine manufactured in 1999. This STUDER S30 LEAN PRO features maximum table swivel 8.5 degrees, X-axis travel of 275 mm, and Z-axis travel of 50 mm. If you are looking to get high-quality grinding capabilities, consider the STUDER S30 LEAN PRO machine we have for sale. Contact us for further details. TECHNICAL SPECS:- Centre height: 175 mm (6.9") - Centre distance: 00 mm (39.4")- Longitudinal slide Max. travel: 50 mm (41.4")- Longitudinal slide Speed (vt): ,000 mm/min (394 ipm)- Longitudinal slide Resolution: mm (.000.004")- Maximum table swivel (Centre distance 00): 8.5 degrees- Wheelhead slide Max. travel: 275 mm (.8")- Wheelhead slide Speed (vt): ,000 mm/min (394 ipm)- Wheelhead slide Resolution: mm (.000.004")- Max. workpiece weight between centres: 130 kg (286 lbs)- Max. load moment (Mmax): 160 Nm (116 ft lbs)- Workhead: Non-swivelling, Roller bearing, AC-Servodrive - Workhead Option: Camlock Adapter - Tailstock Fitting taper: Morse 3 - Tailstock Travel of barrel: 35 mm (1.37")- Control Unit: Fanuc Series 16 (32-Bit processors, ISO and pictogram programming)- Wheelhead Variants: Turret wheelhead U left 400x80 mm Turret wheelhead U left 500x80 mm Grinding wheel right 400x40 mm Grinding wheel right 250x25 mm- Internal grinding attachment: For belt driven spindles Ø0 mm - Max. grinding length (Ls): SPW + b - 80 mm - Max. diameter with three-jaw chuck (ØF): 129 mm - Max. diameter with closed steady (ØL): 140 mmHours: 47.550Condition: Well maintained*The internal grinding spindle has not been in operation for a long time because it was disconnected due to a fault in the frequency converter. Lajdpey Hi T Hsfx Amrsc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Ledsrq Hmzopfx Amreac Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)