Used Extruder Screw for sale (5,729)

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Hedpfx Aaoxgh H Ajcenu

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Hnsdpfxjxlcfke Aacsu Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 1125 mm Measurements depth 2120 mm Measurements height 1960 mm Hodpfoxg Ukhox Aacsnu Machine weight 1100 kg Main Drive Spindle speed range 2486 Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS was manufactured in 2014. It features a screw diameter of 45 mm and a length of 1350 mm, operating between 20-200 rpm. The machine includes five heating/cooling zones and a hopper volume of 0.1 m³. Ideal for those looking to enhance their extrusion capabilities. Contact us for more information about this machine. Application Types Extrusion

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. Hjdpfovfd Uqsx Aacenu The extruder is fully functional

Condition: excellent (used), Year of construction: 1997, operating hours: 110 h, The machine was located at a university and used exclusively for teaching purposes. It was in use for only 110 hours. Name: Twin-screw laboratory extruder Manufacturer: Leistritz Extrusionstechnik GmbH Type: MICRO 27 GL / 32D Year built: 1997 Speed: 400 rpm Operating voltage: Electrical connection values: 400V, 50Hz Control voltage: 230V Hours of operation: 110 hours Driving force: 8,4 kW, Input speed: 2200 rpm Dimensions: Extrusion height: 1050 mm Length: approx. 2500 mm Width: approx. 800 mm Height with control panel: approx. 1900 mm Total weight of the extruder: approx. 950 kg. Hsdpfsxlpzfex Aacjnu Technical doc.: Yes Message: Screw diameter: 27 mm, Screw length: 32 D, Screw flight depth: 4.3 mm, Screw rotation direction: co-rotating / counter-rotating, Screw speed range: 10 - 400 rpm, Total screw torque: 200 Nm, Screw back pressure (continuous operation): max. 200 ba,r Gear ratio: i = 5.38 Accessories: Dosing machine, nozzle hop / LSA tool, vacuum unit, temperature control unit, cooling belt (stainless steel version), Strand pelletizer, granulator, profile downstream. Condition: Used very good Price: By request

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Hnsdpfx Aovfxqysacju Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Hodpfxexgh Dzj Aacsnu

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused Hnedpfoxg I Eljx Aacju - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 320 kg This Krauss Maffei KME 30-25 was manufactured in 2016. It operates on a 3-phase 400 V system with a frequency of 50 Hz. The total input current is 31 A, with motor and heating currents at 15 A and 16 A respectively. It's a robust single screw extruder ideal for consistent performance. Contact us for more information about this machine. Hsdpfxexg Ukns Aacenu Application Types Extrusion

Condition: excellent (used), functionality: fully functional, Brabender Single-Screw Extruder – 19 mm / 60 L/D – with Extensive Accessories Technical Data & Features: • Screw diameter: 19 mm • L/D ratio: 60 • 6 heating zones • Equipped with degassing • Cooling: fan and water cooling • Control via Brabender PL 2100 controller – allows computer connection and process analysis • Mobile unit with castors Accessories & Spare Parts: • Strand die • Flat film die • Temperature control units • Computer connection cable and interface • Various spare and wear parts Special Features: • Compact design Hnjdpfjw Iqidex Aacju • Ideal for laboratory and pilot testing • Comprehensive process monitoring and evaluation options • Ready for immediate use

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Hedpotpg D Ujfx Aacenu Propeller Ø: 75mm Working hours: 76,200

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Hsdpfx Asu Itqdjacjnu

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Hjdpexghz Hofx Aacenu

Year of construction: 2013, condition: ready for operation (used), Additional Equipment Extruder (Krauss Maffei) Calibration table (Ide) Haul-off (Ide) Separation unit (Ide) Optionally a sawing unit (Battenfeld) can be purchased the capacity is 180 kg / h This twin screw extruder was manufactured in 2013. It features a robust 4m long base frame, galvanized and powder-coated for durability. The machine includes three liquid ring vacuum pumps and a motorized longitudinal adjustment of 400mm. It's equipped with a caterpillar haul-off capable of speeds from 0.7 to 14.0 m/min. Ideal for producing roller shutter profiles, the Krauss Maffei KMD 75 XS/P machine we have for sale represents a significant opportunity. Contact us for further details. Application Types Hnjdpfx Aaexg Uidjcju Extrusion

Condition: excellent (used), functionality: fully functional, Berstorff Twin-Screw Extruder ZE (CL) 25 Technical Data: • Year of manufacture: 1997 • Motor power: 11.6 kW • Heating capacity: 16 kW • Screw speed: 500 rpm Screw: • Co-rotating twin-screw extruder, 2 × 25 mm × 30 L/D • Modular construction (screw elements) • 2 × degassing zones • K-TRON twin-screw feeder Control: • Conventional contactor control • Control cabinet integrated into machine frame • Separate operating panel with control interface Hnodpfx Asw Iqhmjacsu • Digital displays (temperature and melt pressure) as well as various indicator lights Miscellaneous: • Machine is connected and ready for testing • Test run possible by arrangement

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Hsdpfxetpg Dne Aacenu Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Hnjdpfx Aajxghy Nocou

Year of construction: 2025, condition: ready for operation (used), General Data Hnjdpsxg Ukbofx Aacou Machine weight 1100 kg This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2025. It features a 23 kW drive power, a maximum drive speed of 2486 rpm, and a screw diameter of 45 mm. The machine includes five heating/cooling zones and a maximum installed cylinder heating capacity of 10 kW. Ideal for high-quality extrusion capabilities. Contact us for more information. Application Types Extrusion

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Hjdju Hik Djpfx Aacsnu - Control system

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 036, IDE single screw extruder for PVC profiles Hjdpfx Aaexghxrsconu

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Hnedpfew Spt Nox Aaceu Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 2020, condition: new, functionality: fully functional, Single Screw Extruder Screw diameter: 25mm / 25 LD Motor 2,2 kW Die Head available Feeding system available waterbath and pelletizer available Visit and Trial possible. Hsdpfx Aefw Rigjacjnu

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 5000 kg Injection Unit Screw diameter 61.6 Hnedpexcqm Rofx Aaceu Additional Equipment Dryer Feeder Strand chute Granulator This Leistritz ZSE 60MAXX-44D was manufactured in 2007. A twin screw extruder with a screw diameter of 61.6 mm and a high torque capacity of up to 3750 Nm, it offers up to 50% higher throughput potential than earlier models. Ideal for applications in plastics compounding and pharmaceutical extrusion. Consider the opportunity to buy this Leistritz ZSE 60MAXX-44D twin screw extruder. Contact us for more information about this machine. Application Types Extrusion

Condition: good (used), - Twin-screw extruder - Screw diameter: 52 mm - Drive: 15 kW Hedpsrvxx Hefx Aacsnu - Control system - Screen changer/filter installed - Strand die installed - New control system The system can be inspected in Wuppertal by appointment.

Year of construction: 2012, condition: ready for operation (used), This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, it's designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, it's ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine. Application Types Extrusion Hnsdpjxnd Rasfx Aacou