KRAUSS-MAFFEI KMD-2-50-KK

KraussMaffei KMD-2-50-KK

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Codpfohz Dyaex Ac Terg

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Cedpfx Aceuanq To Tsrg

Condition: new, Funnel opening: 2,500 x 2,000 mm Rotors: 2 units Rotor diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic locking system for sieve flaps to remove disruptive materials Crjdpsbq St Hefx Ac Teg Weight: approx. 18,500 kg

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle locks, low-range gearing) with 7 seats Cedpfx Acefarx Ue Torg Water tank: 2,500 liters Pump: Metz, with a flow rate of 2,800 l/min Additional equipment: quick attack connection on the right side with a 50-meter hose Dimensions (LxWxH): 7100 x 2300 x 3000 mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm Crsdev Tpxqepfx Ac Teg -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000 Csdpfx Ajt Akgwoc Tjrg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 010/Q, For sale is a paper bag making machine manufactured by the company GAPS from Italy. Web width: 670–1670 mm Roll diameter: 1200 mm Core diameter: 76 mm Paper weight: 90–140 g/m² Bag width: 240–540 mm Cut-off length with handles: 380–670 mm Gusset: 90–270 mm Handle height: 100 mm Credeww T Naspfx Ac Tjg Handle width: 16 mm Patch length: 160 mm Patch height: 52 mm Patch roll diameter: 1200 mm Patch roll width: 100 mm Patch roll basis weight: 80–100 g/m² Maximum production speed: 120 cycles Connected load: 30 kW Weight: 24,500 kg Machine dimensions: 16,500 × 3,500 × 2,800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests Cjdsyyw T Uspfx Ac Terg

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 Crsdpfoxvyymex Ac Tog - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Crodpfx Acex Dmdho Teg Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow