Used Barrel for sale (232)

Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Frame: DB 7350 nova gray, support legs: black coated Podpfx Amei Riwqspspr Available immediately!

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Barrel width 1 - 15 mm Psdpsi Ab Unjfx Ampspr - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - Drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT Pedpfowzy N Usx Ampopr • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Year of construction: 2014, condition: refurbished (used), machine/vehicle number: 714_0917, Robot palletizing system KEG barrels loading and depalletizing. Capacity of up to 120 / h loading and depalletizing. We have been operating these systems successfully for several years. Our KEG gripper can grap KEGs from 300-450mm (adjustable). The system is equipped with a protective housing and access control through a light curtain. PLC Controlled via Siemens S7 TIA Portal. Required space approx. 4500x3500mm. Optionally also a flow keg weigher, pallet labeler, automatic capsule application available from us. We would be happy to integrate your existing components into our system. We have the full KNOW HOW! Pedpfxog N S Eds Ampjpr Have references for several years. We also provide support after the purchase. Can be implemented at short notice, assembly, integration and commissioning from a single source.

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 37 kW Rotor-width: 450 mm Ppjdsckg Rfepfx Ampjr Working-width: 600 mm Rotor with 4 blade-rows 2 stator-blade rows Roller feed hopper Size reduction of film, hollow containers, barrels, boxes, pipes, profiles,...

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD Ppedpjckg Rajfx Ampjr manufacturing year: brand new machine drive: 55 kW Rotor-width: 450 mm Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, barrels, pipes, profiles,...

Condition: new, Cutting mill / Granulator Podpfeckg Nzex Ampopr brand: NEUE HERBOLD manufacturing year: brand new machine drive: 75 kW Rotor-width: 600 mm Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, pipes, profiles, barrels,...

Year of construction: 1996, condition: used, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: 1996 drive: 37 kW Rotor-width: 300 mm Working-width: 800 mm Rotor with 3 blade-rows 2 stator-blade rows Roller feed hopper Ppedpsf Rlbijfx Ampor Size reduction of film, hollow containers, barrels, boxes, pipes, profiles,...

Condition: used, Year of construction: 2024, functionality: fully functional, pressing force: 100 t, stroke length: 250 mm, reverse speed: 60 mm/s, table width: 700 mm, table length: 500 mm, table height: 900 mm, total length: 1,525 mm, total width: 1,075 mm, total height: 2,675 mm, overall weight: 2,540 kg, distance between side stands: 800 mm, Equipment: safety light barrier, RIGID FRAME HYDRAULIC PRESSES We have engineered the motorized rigid frame hydraulic presses of the R/NC series in six different capacities ranging from 80 to 500 tons. Specially designed for stamping, die-cutting, and drawing operations. The latest generation R series hydraulic presses have evolved into highly versatile machines, including the capability to integrate seamlessly into automatic production lines. They operate at a hydraulic pressure below 320 BAR to ensure maximum durability of the entire hydraulic system. The R/NC series drawing and stamping presses feature an electro-welded frame made exclusively from S355JR steel, stabilized and precision-machined after welding for perfect parallelism and accuracy. The frame design and strength are optimized using finite element analysis software, ensuring our high standards of precision and quality are always maintained. Both the upper and lower tables are made from precision-machined C45E steel and feature DIN-650 T-slots. The upper table maintains perfect parallelism by means of four lateral cylindrical guides with maintenance-free, anti-friction bimetallic bushings. The double-acting cylinder features a lapped barrel, a chrome-plated piston, and maintenance-free wear guides. The hydraulic unit is motorized, offering two speeds with automatic disengagement of the rapid speed, and includes a cylinder decompression valve. Standard features include a SIEMENS SIMATIC S7 1200 safety PLC and a 4” MTP-400 touchscreen positioned above the electric foot pedal control. This setup allows for programming of semi-automatic and automatic operating modes, power, stroke, and dwell time of the upper cylinder. Up to 99 recipes can be stored, with full parameter settings for each recipe. The electrical control panel includes a selector switch for manual/automatic operation, and a key switch for maintenance tasks. All electric and hydraulic controls are redundant and self-monitored, with an additional safety block and safety self-monitoring features. The machine includes verification and certification of correct operation, as well as the safety distance of the light curtains. Safety features include type 4 PLe photoelectric light curtains at the front working area, two fixed side guards, and a rear access guard equipped with a magnetic disconnect sensor, polycarbonate windows, and LED interior lighting. Installation of a hydraulic cushion or ejector is supported. Compliant with all essential CE safety and health requirements. Supplied with an instruction manual. Technical Specifications: Pjdpfx Aewlgkmempspr - Force: 100 t - Motor power: 13 kW - Working speed: 3–9 mm/s - Approach speed: 40 mm/s - Return speed: 60 mm/s - Maximum pressure: 319 bar (up to 320 bar) - Ram stroke: 250 mm - Guide diameter: 50 mm - Lower table: 700×500 mm - Upper table: 600×450 mm - Max. vertical opening: 500 mm - Front opening: 800 mm - Working height: 900 mm - Overall front width: 1,525 mm - Overall length: 1,075 mm - Overall height: 2,675 mm - Weight: 2,540 kg

Condition: like new (used), functionality: fully functional, pressing force: 400 t, stroke length: 750 mm, operating speed: 106 mm/s, reverse speed: 125 mm/s, table width: 2,000 mm, table length: 1,000 mm, pressing speed: 12 mm/s, Equipment: safety light barrier, HYDRAULIC C-FRAME PRESS FOR RAILWAY RAIL STRAIGHTENING We are offering a new/replica version of this press. The press will be placed on sale by the customer in the second or third quarter of 2026 due to the project's extension. The CF-400E/NC hydraulic press belongs to the CF/NC series and was specifically designed for railway rail straightening. Equipped with an upper and lower table made of machined C45E steel with DIN 650 grooves. It uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements according to CE regulations. TECHNICAL DATA Press force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Push plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Podpfewkv A Nox Ampepr Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The gooseneck structure is electro-welded and made entirely of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The upper table ensures perfect alignment with four 80 mm diameter lateral cylindrical guides equipped with maintenance-free bimetallic bushings. CYLINDERS AND HYDRAULIC GROUP • Single-acting main cylinder with jacketed barrel, chrome-plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with chrome-plated pistons and wear-resistant guides, enabling fast start-up and return speeds. • Includes two independent hydraulic safety blocks. • Motorized hydraulic group with pre-fill valve for forward and reverse flow. Constant power, variable flow pump. • Equipped with a directional control valve, a pressure relief valve, a decompression valve, and an air-oil cooling system. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 CONFORT, located in the control cabinet. It allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. It has a memory capacity of 300 recipes, with each recipe capable of programming all previous values. • Electrical and hydraulic maneuvers are redundant and self-controlled. It includes an additional safety block and self-checking devices for maneuvers and safety. It includes verification and certification of correct operation and the safety distance for photocells. • Operation is via a low-voltage electric pedal. • For safety, lasers and work area protection with Category IV photoelectric barriers are integrated.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 450 mm, reverse speed: 230 mm/s, throat depth: 375 mm, ram plate width: 650 mm, ram plate length: 450 mm, total length: 1,240 mm, total width: 1,950 mm, total height: 2,790 mm, overall weight: 3,820 kg, pressure: 290 bar, working height: 850 mm, Equipment: documentation/manual, safety light barrier, Model CF-100/VR + frequency converter, inverter system. We have designed the CF/VR series C-frame motorized hydraulic presses in a range of three different capacities, from 80 to 150 tonnes. Specifically engineered for medium to high volume production processes such as stamping, die-cutting, and deep drawing. The new generation of CF/VR hydraulic presses offers versatile applications, making it possible to integrate these machines into automated production lines. They operate at hydraulic pressures below 290 BAR to ensure increased longevity of the entire hydraulic system. STRUCTURE AND TABLES: The CF/VR series hydraulic C-frame presses feature an electro-welded frame made exclusively of S355JR steel, stabilized and machined after welding to ensure perfect parallelism and high precision. The structure is designed and calculated using finite element analysis (FEA) software, guaranteeing our high standards for precision and quality at all times. Each press is equipped with upper and lower tables made of machined C45E steel, featuring DIN 650 T-slots. The upper table maintains perfect parallelism via four 50 mm diameter lateral cylindrical guides with maintenance-free, anti-friction, bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: The main cylinder is single-acting, with a lapped barrel, chrome-plated piston rod, and maintenance-free wear guides. For rapid approach and return movements, two double-acting lateral cylinders are fitted, also with lapped barrels, chrome-plated rods, and maintenance-free wear guides, enabling fast approach and return speeds. The motorized hydraulic unit includes a prefill valve for approach and return, and a fixed displacement pump for constant-speed operations. The assembly also features a check valve, pressure relief valve, cylinder decompression valve, and air-oil cooling system. Ppodpfx Amswpg Uaopjr ELECTRICAL INSTALLATION AND SAFETY: Standard equipment includes a SIEMENS SIMATRIC S7 1200 series PLC and a 7'' tilting touch screen panel (MPT-700 model), enabling programming of press force, cylinder stroke, and speeds, with storage for up to 300 programs. All electric and hydraulic controls are redundant and self-monitoring. An additional safety block and self-checking devices are installed for operational safety. Includes verification and certification of proper functionality and correct safety distances for photocell protection. Activation is via a low-voltage electric foot pedal. To guarantee safety, the presses feature type 4 PLe safety light curtains at the working area front, two fixed lateral safety guards with polycarbonate windows, and internal LED work lighting. Supplied with operator's manual. Fully complies with all essential health and safety requirements according to CE standards.

Condition: good (used), Year of construction: 2010, clamping force: 1,600 kN, Equipment: documentation/manual, Sumitomo Demag Systec 160/520 – Injection Unit 430 CLAMPING UNIT Clamping force: 1600 kN Mould closing force: 1760 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 2200 kg Max. weight on moving platen: 1300 kg Max. weight on fixed platen: 1700 kg EJECTOR Psdpeyarfdofx Ampepr Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l MACHINE OVERALL Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total installed power: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95–364 / 1.75–364 / 1.75–364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), Ppodpfxjuhaqne Amper 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - Hirth cylinder barrel locking - Bar feeder Iemca PRA40/33F

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6 000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - 1 Bar feed cam parts 60 [mm] - 1 Auxiliary camshaft drive Ppjdouhaqzspfx Ampor - 1 Pick-up. 20 [mm] with lever - Hirth cylinder barrel locking - 8 cross slides, stroke 30 [mm], optional - Central slide, stroke 60 [mm] - Cutting oil tank with magnetic drum conveyor - Coolant pump capacity 150 [l/min] - Iemca PRA52/33F bar loader n°020651PA03, year 2006

Condition: used, TECHNICAL DETAILS - Minimum/maximum bar diameter : 8-25.4 [mm] - Maximum workpiece length : 120 [mm] - Spindle speed : 5,000 [rpm] - Spindle power : 18 [kW] - Number of digital axes : 17 - Barrel locking with Hirth teeth - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8,500 [kg] MACHINE HOURS - Powered hours : 63,341 [h] EQUIPMENT - TORNOS TB DECO CNC - Spindle stop Pedpfx Aouharfompepr - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling machine - Pick-up machine - Turning tool holders - Bar feeder: IEMCA SIR 25 P - KNOLL lubrication tank - Chip conveyor - Cutting oil air conditioning

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] Ppsdsuhap Depfx Ampor - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, TECHNICAL DETAILS Ppedpfx Aouhapdsmpor - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, TECHNICAL DETAILS - spindle number : 8 - number of turning slides : 8 - number of longitudinal posts : 8 Pjdpfx Ameuhapkopepr - max. bar clearance : round Ø 22 [mm] - max. bar clearance : hexagonal 19 [mm] - max. bar clearance : square 15 [mm] - max. feed length : 60 [mm] - number of spindle speeds : 20 - spindle speeds : 620 to 6035 [Rpm] - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [part/min] - transversal slides strokes : 30 [mm] - independent feeds max. stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4 700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - chip conveyor

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] Pjdpfxeuhap Rs Ampjpr - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI KM 4000-24500 MC Injection Moulding Machine _____ Basic Information • Year of manufacture: 2003 • Control system: MC4 • Software languages: Swedish, German, English _____ Clamping Unit • Clamping force: 40,000 kN • Mold opening force: 2,525 kN • Platen dimensions (H × V): 3315 × 2920 mm • Tie bar clearance (H × V): 2240 × 1800 mm • Mold opening stroke: 3,100 mm • Min./max. mold height: 1,100 – 2,000 mm • Maximum daylight: 4,200 mm • Ejector stroke: 350 mm • Ejector force (front/rear): 772 / 368 kN _____ Injection Unit (HPS-AT) • Screw diameter: 150 mm • L/D ratio: 23 • Maximum injection pressure: 1,843 bar Psdpfx Aeyifg Djmpepr • Injection volume: 13,254 cm³ • Shot weight (PS): 12,061 g • Injection rate: 1,431 cm³/s • Plasticizing capacity: 266 g/s _____ Electro-Hydraulic System • Hydraulic pump motor power: 200 kW • Installed heater power: 159 kW • Number of barrel heating zones: 7 • Dry cycle time (Euromap 6): 270 cycles/h • Hydraulic oil tank capacity: 2,700 l _____ Machine Dimensions and Weight • Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m • Machine weight: 247 t • Maximum mold weight: 90,000 kg

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Ppjdoxu E E Sepfx Ampjr Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Psdpsw S Ewqsfx Ampopr Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 45 = 90kW 2. Machine Weight: 12.000 kg 3. Shredding Capacity : 3 - 4 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material HARDOX 500. Blade thickness is 6 cm and coated with HRC 60 hardfilled welding. Blades are easy to replace. 5. Loading Chamber Dimensions: 800 mm x 1200 mm 6. The walls will be covered with HARDOX 500 material. Ppodpfx Amsgwcfzoper 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The rotors are moving independently of each other 11. The loading of the shredder can be done by grape or conveyors 12. In case of a jam between the rotor blades the machine turns the rotors in the opposite direction to remove the compression. 13. After the jam is solved the rotors return to their normal direction, If Jam is continuing the machine will stop with an acoustic warning. 14. A Hydraulic Oil cooling system is implemented. 15. Rotors are independent from each other and work at 18-20 rpm. 16. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical parts will be SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic with SIEMENS S7-1200 PLC control. 19. The machine is certified with ISO 9001 issued by URS, and CE issued by SGS. 20. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Condition: used, functionality: fully functional, Year of construction: 2013, Water barrel: - suitable for Nilfisk City Ranger 3500 - 1000l - year of construction 2013 - Pump hydraulically driven 40bar; 91,3l/min Ppsdjtulgfspfx Ampsr - Hose on reel 10m - 250cm x 170cm x 195cm - Weight: 250kg - Rollable storage rack - separate control panel Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas Pjdpfx Ajt Nfarempepr • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE