Used Barrel for sale (225)

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings, thrust bearings, linear ball bearings Kedpfx Aofgyf Isfksna -Linear ball bearings -Inner diameter: 30 mm -Outer diameter: 47 mm -Length: 68 mm -Price: per piece -Quantity: 117 pieces -Weight: 0.3 kg/piece

Condition: good (used), revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center Knedsrp Ilaspfx Afksa -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

Condition: used, oil hand pump, oil pump, fuel hand pump, hand lever pump, hand pump, oil drum pump, oil drum pump Knsdet Rbh Uspfx Afkea -Manufacturer: ABG pumps, hand pump for oil and fuel -Barrel screw connection: M 64 x 4. -Dimensions: 270/60/H290mm -Weight: 1.1 kg

Condition: used, Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper Kjdelyvc Ujpfx Afkona -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Knjdpfxsb A Ia Ro Afkea -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Ksdpfsb A Ipzex Afkona -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg

Condition: good (used), moving point, moving center point, moving Morse taper, moving Kjded R Smnepfx Afkona -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 70/240 mm -Weight: 3 kg

Condition: used, moving point, moving center point, moving Morse taper, moving Kedpjd R Smuofx Afksna -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/220 mm -Weight: 2.8 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 40 mm -barrel tip: shaft-mounted Kjdpfx Aec S D H Ajfksna -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 50-85 mm -barrel tip: shaft-mounted Kedpec S D H Hefx Afksna -Recording: MK5 -Weight: 5.4 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -barrel tip: shaft-mounted Kodpod R Smxjfx Afkjna -Recording: MK5 -Dimensions: Ø 85/242 mm -Weight: 3.9 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 75/250 mm -barrel tip: shaft-mounted -Recording: MK7 Kodpfx Asc Nir Ijfksna -Weight: 34 kg

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC Ksdpfsztpkpsx Afkjna

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Knodpfx Aox Sqi Hofkja Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: good (used), Year of construction: 2007, Technical Specifications General Information 1. Manufacturer: ENGEL 2. Model: DUO 7050 / 1000 3. Control Unit: CC200 4. Year of Manufacture: 2007 5. Operating Hours: 100,145 h Clamping Unit Knedey Ukfmjpfx Afkja 1. Clamping Force: 10,000 kN (1,000 tons) 2. Tie Bar Distance (H × V): 1,400 × 1,150 mm 3. Platen Size (H × V): 1,850 × 1,810 mm 4. Mould Height (Min./Max.): 578 – 1,678 mm 5. Opening Stroke: 2,100 mm 6. Daylight (EBH): 1,000 mm 7. Centering (Fixed / Moving Platen): Ø250 mm Clamping Unit Equipment 1. Core Pulls: 2. Fixed Platen: 3 3. Moving Platen: 3 4. Air Valves: 5. Fixed Platen: 1 6. Moving Platen: 1 7. Magnetic Mould Clamping System: Yes Maximum Mould Weight 1. Maximum Total Mould Weight: 21,000 kg 2. Maximum Mould Weight on Moving Platen: 14,000 kg Injection Unit 1. Screw Diameter: 105 mm 2. Shot Volume: 4,160 cm³ 3. Maximum Specific Injection Pressure: 2,090 bar 4. Plasticizing Capacity (PS): 112 g/s 5. Maximum Screw Speed: 150 rpm 6. Screw Drive: Electric 7. Screw Surface: Armoured and nitrided 8. Barrel: Bimetallic M3 Nozzle 1. Nozzle Orifice Diameter: 8.0 mm 2. Nozzle Radius: R35 mm 3. Nozzle Immersion Depth: 50 mm 4. Maximum Outside Nozzle Diameter: 60 mm KUKA ROBOT 6 axes

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) Knsdpfx Ajzktkzefkja 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Knodpfxoyyz Dds Afkja Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending Knjdpfx Ajwkg Txsfkea on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg

Condition: good (used), Year of construction: 2005, clamping force: 27,000 kN, Equipment: documentation/manual, KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm MC5 controll Clamping Unit * Clamping force: 27,000 kN / 2,700 t * Mold opening force: 1,890 kN * Moving platen force, opening/closing: 342 / 294 kN * Platen dimensions: 3,020 × 2,600 mm * Distance between tie bars (H × V): 2,100 × 1,700 mm * Opening stroke: 3,000 mm Kjdpjznwt Iofx Afksna * Mold height min./max.: 900 / 2,000 mm * Maximum daylight: 3,900 mm * Ejector stroke: 400 mm * Ejector force forward/backward: 400 / 200 kN Injection Unit – SP 12000 Screw diameter: 120 mm * L/D ratio: 23 * Maximum injection pressure: 1,758 bar * Stroke volume: 6,786 cm³ * Shot weight PS: 6,175 g * Injection flow rate: 1,118 cm³/s * Screw speed nominal/max.: 100 / 141 rpm * Plasticizing rate PS at nominal speed: 169 g/s * Plasticizing rate PE at nominal speed: 131 g/s * Plasticizing rate PS at maximum speed: 239 g/s * Plasticizing rate PE at maximum speed: 184 g/s * Nozzle contact force: 166 kN Electro-Hydraulic Equipment * Pump motor rated power: 132 kW * Installed heating capacity: 84 kW * Barrel heating/control zones: 7 * Dry cycle rate according to Euromap 6: 356 cycles/h * Dry cycle time according to Euromap 6: 10.1 s * Oil tank capacity: 2,440 l Dimensions & Weight * Net weight incl. control cabinet: 168 t * Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m * Maximum mold weight: 72,000 kg With Electric Screw Drive * Screw drive power: 147 kW * Screw speed nominal/max.: 100 / 158 rpm * Plasticizing rate PS nominal: 178 g/s * Plasticizing rate PE nominal: 137 g/s * Plasticizing rate PS maximum: 267 g/s * Plasticizing rate PE maximum: 206 g/s With Accumulator (ZE) Injection flow rate: 1,696 cm³/s Equipment: 4 cores hydraulic - moving platen 16 hydraulic cascades 6 pneumatic cascades Hotrunnrer controllers: 48 removable tie bar Software for Extrusion

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Knjdozkttcepfx Afkea _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge Knjdjzht H Rjpfx Afksa • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Kjdpfx Aezump Eefkona Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 310 mm -Width: 82 mm -Inner diameter: 200 mm Kodpfx Afeb A Ip Aokona -Weight 22.8 kg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Ksdpfxjb A Imws Afkena -Version: cc/w33 -d= Inside: 220 -D = Outside: 340 -B = Width: 90 -Weight: 30 kg

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, 1.1 General Features Extruder Type - Horizontal Kodpfx Afezarn Eeksna Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available