Used Engel for sale (257)

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Ncjdoy Au I Uspfx Amnot Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Ncedpfx Aewm Iy Esmnet Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Condition: ready for operation (used), Engel GNM 5440 motor 24 V SN:J33134 ,used, normal traces of use, 100% functional, scope of delivery according to photos Ncodpei D Hvbjfx Amnst

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Ncjdpjy N R N Ujfx Amnst Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz Nsdpfxsy Uka Dj Amnjct

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. Nsdpowm Iz Nefx Amnjct ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: excellent (used), Year of construction: 2010, operating hours: 20,656 h, functionality: fully functional, machine/vehicle number: 174620, clamping force: 260 kN, The machine comes from toolmaking and was only used for sampling. This is why it has low operating hours and is in very good condition. Please check the documents; the order confirmation is included there. Ncsdpfexfgfzex Amnot

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: Ncodpfsy Ir Nyex Amnjt - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Nodsy R Eq Aspfx Amnsct terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C Ncsdey Ib Aispfx Amnot • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm Ncedpfxjx Nr Ryo Amnot • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: ready for operation (used), Year of construction: 2002, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Screw Diameter: 40 mm (Selected option) • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN Nedpsy Hhwdofx Amnect • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm • Max. Platen Distance: 800 mm • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility Nodpfx Amsxzq Skonoct SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: good (used), Year of construction: 2007, Clamping force: 1000 t Screw diameter: 105 mm Distance between tie bars V: 1150 mm Distance between tie bars H: 1400 mm Shot volume: 4160 cm3 Ncsdpfx Amoy Ukfmenot Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available Ncsdpfx Amoy Uffhsnst The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Ncsdpfoy Ufd Rsx Amnet Shot volume: 295 cm3 Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table

Condition: used, Year of construction: 2018, Serial No. 221921, Control unit by Engel, Type CC300, Clamping force 1,700 t, 2 injection units, rotary table, minimum/maximum mold height 800 - 1,600 mm, platen distance 3,350 mm, clear horizontal/vertical opening 1,850 / 1,415 mm, 16 cascade controllers, 64 hot runner zones, core pulls hydraulic 4 (moving side) / 4 (fixed side), screw diameter 105 / 50 mm, injection weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control by Oni, Type Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block module 125 °C, visualization unit, extraction handling by Engel, Type Viper 60, 5 axes (X,Y,Z,C,B-Axis), nozzle spacing 300 mm, year of manufacture 2018, Serial No. 221938, part enclosure, outfeed conveyor, mobile conveyor by Engel, Type BGR FB100 KMAT, year of manufacture 2018, Serial No. 2144098, L approx. 4,200 mm, W 1,000 mm, external temperature control unit and material dosing not included in this offer. Damage: Hydraulic hoses leaking. Nsdpfxsy I R Tqe Amnsct

Condition: used, Year of construction: 2018, Serial No. 221920, Control system: Engel, Type CC300, Clamping force: 800 t, 2 injection units, rotary table, minimum/maximum mold height: 500 - 1,100 mm, platen spacing: 2,100 mm, clear opening horizontal/vertical: 1,170 / 1,000 mm, 8 cascades, 48 hot runner zones, core pulls hydraulic: 2 (moving platen) / 4 (fixed platen), screw diameter: 80 / 60 mm, shot weight: 1,800 / 250 g, operating hours: 28,236, machine weight: 30,000 kg, mold temperature control unit: Oni, Type Rhytemper FlexControl 30, 3x 8-circuit block modules at 125 °C, 6-circuit block module at 125 °C, visualization unit, handling system: Engel, Type Viper 20 (X, Y, Z, B axes), nozzle distance: 300 mm, year of manufacture: 2018, Serial No. 221937, parts enclosure with conveyor belt: Engel, Type BGR FB100 KMAT, year of manufacture: 2018, 2102958, length/width approx. 3,500 x 800 mm, external temperature control unit and material dosing not included in the scope of supply. Njdpfx Aey I R Inemnect

Condition: used, Year of construction: 2018, Ser. No. 221903, Control system, Manufacturer: Engel, Type: CC300, Clamping force: 400 t, Installation height: 450 - 950 mm, Plate distance: 1,450 mm, 8 cascades, 24 hot runner zones, hydraulic core pulls: 2 (DS) / 4 (AS), screw diameter: 60 mm, shot weight: 750 g, operating hours: 30,738, machine weight: 24,100 kg, mold temperature control, Manufacturer: Oni, Type: Rhytemper FlexControl 8, 2x 4-fold block modules 125 °C, visualization unit, extraction handling unit, Manufacturer: Engel, Type: Viper 20 EP8, 5 axes (X,Y,Z,C,B axis), nozzle distance not applicable for single-component, Year: 2018, Ser. No. 221917, part enclosure, belt discharge conveyor, Manufacturer: Engel, Type: FL4600 B600HLI, Year: 2018, Ser. No. 2101471, external temperature control unit and material dosing not included in this position. Nedpfey I Rxmox Amnsct

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s Njdpfx Amoy D Npcenoct • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding production, with only 11,300 operating hours and in like-new condition. Enclosed you will find: Ncedowb Dl Topfx Amnot • Current photos of the machine • The order confirmation from ENGEL to NYPRO The original new price was approximately €330,000. The sales price is €79,500 including crane. The technical data can be provided upon request and are also listed below in the documents. Included in the price: Dismantling the crane onto two Euro pallets, as well as moving the machine out of the cleanroom and loading onto your truck using a 15-ton forklift. If you are interested or have any questions, please feel free to contact me at any time. The machine is located near Karlsruhe and can be inspected there. Delivery possible within a few days.

Condition: good (used), Year of construction: 2016, Ref. no.: 18657 Manufacturer: ENGEL Type: e-victory 440/160 CC300 ecodrive Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) How it works Electric part: * Injection unit (screw movement) * Ensures very high precision and process stability Hydraulic part: * Clamping unit (mould closing) * Maintains clamping force efficiently without continuous energy consumption This system combines: * The precision of an all-electric machine * With the power and efficiency of a hydraulic system This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design. The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable processing performance Ncedjy Ipgpjpfx Amnet * Compact footprint with a large mould installation area * Modern ENGEL control system The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures. Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Ncedpfx Amsnxkxwsnot Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced.

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Nedpfx Amsy N Uwcsnoct

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Ncodoy Ui Nqopfx Amnot Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter