Used Pellet for sale (253)

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Dwsdpei Akrkofx Abvob Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). Dwodpfxszw Apge Abvsb The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). Dwodpfx Abjy R I Uqovsb • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 50 kg, type of input current: AC, input voltage: 230 V, total height: 540 mm, total width: 260 mm, total length: 500 mm, power: 0.5 kW (0.68 HP), Equipment: type plate available, We are offering this used Collin Teach-Line CSG 171 T pelletizer, manufactured in 2009, for sale. Type: Teach-Line CSG 171 T 20 m/min 1-3 simultaneous feed intakes Dwsdpezy U Ugefx Abveb Maximum diameter: 4 mm 0.5 kW 230 V Year of manufacture: 2009 Very good condition, cutting blades show no discernible wear. If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Dwedpfx Abozrvh Esveb Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2024, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, Equipment: documentation/manual, For sale is a Himel / Gama pellet press for straw / hay / alfalfa, optimized! According to the manufacturer, it has a capacity of 700 - 1200 tons per hour, depending on the biomass! The press was installed as a temporary solution because identical models were undergoing a complete overhaul. Dodpfx Aszzf D Isbvjwb

Condition: used, Year of construction: 1994, operating hours: 392 h, functionality: limited functionality, machine/vehicle number: 1115, type of input current: three-phase, total height: 150 mm, total length: 2,200 mm, total width: 900 mm, overall weight: 1,800 kg, power: 11 kW (14.96 HP), input voltage: 380 V, Equipment: documentation/manual, Brand: Pawert Type: I-40/85 Year of construction: 1994 Capacity: 150 kg/hour Briquette dimensions: Ø 40 mm Dwjdpszyau Eofx Abveb Motor: 11 kW Weight: 1800 Including feed screw and discharge chute.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Dodpfxjzcf Dls Abvewb Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively Dwsdpfswm Nq Ejx Abvjb

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Dwsdpfoxmhx Eex Abveb Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Engine power: 22 kW. Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Djdsyrhd Tepfx Abvswb Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Dwjdpfx Aboztaahoveb Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line If you have any questions or need further information, please feel free to send us a message or call us. Dedpfxey Ah Nfo Abvjwb

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A Dodpozvq Rcefx Abvowb • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) With this machine, you can also use loose 3mm pellets! And, of course, blocks. As good as new, 1-year warranty. Includes hoses and nozzle. Dwjdpfeydpy Tjx Abveb We have various new parts in stock for Cold Jet machines. The COLD JET machine is suitable for industrial cleaning, both small and very large projects. The advantage of this machine is that it doesn't use new-generation electronics. It is one of the most aggressive machines on the market. This machine is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Blasting complete with the following equipment: COLD JET i3 Microclean (47 HOURS OF USE) 1 x 20' blast hose 1 x Coldjet applicator 1 x nozzle One of the best machines in the world. No electronics. That’s why it’s reliable. And it’s inexpensive to maintain. For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance are available for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: like new (used), Year of construction: 2024, Pellet production plant – complete line – fully automated Salmatec press Rematec hammer mill Belt dryer VAI bagging machine Cooler Sifter Palletizer Less than 1000 operating hours – certified Option for on-site reinstallation Option for on-site operator training Dwsdpfx Abozg Eudsvsb

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Dwodpfx Abszvc R Ueveb Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: Pal 1600, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1 pellet press brand: Paladin 1600-210 inner diameter die 850 mm tread die 210 mm Press is equipped with 2 motors each 90 KW n=1500. Dodpfx Absq U R N Tjvewb Press door is made of stainless steel with overload valve in door. 3 Roll press with 3 rolls on the press overhauled in a drilled or racked version Press is complete with mold lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts and toothed belt. Also, all safeties will be observed and appropriate switches on Friction safety , door switch and inspection hatches will be fitted. Refurbished pump unit for friction and V-belt tensioning Remark: Conditioner on the press is optional

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h Dwedpjzgf A Usfx Abvjb EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. Dodszaricjpfx Abvowb The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Dwsdpfx Aetw Szaobvjb Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: refurbished (used), Year of construction: 2026, Pellet Press for Sale Manufacturer - General Dies Dwodpfx Abszq E Avsvjb Engine Power - 200 Kw Capacity - 2,2 t/h Year - 2014 / 2026 Reconditioned

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Dwjdjyilgdopfx Abvob Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 Dwedpfxozryyrj Abvsb - Pressing capacity: up to approx. 3–5 t/h

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Dsdsznz Ezjpfx Abvowb Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.