Krauss Maffei 1300-8100MX (2016) low hours, removable tie bar

KraussMaffei 1300-8100MX

Condition: ready for operation (used), Year of construction: 2012, operating hours: 52,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 95 mm, Clamping force 13000 kN Mould opening force, max. 910 kN Travel force movable platen opening 217 kN Travel force movable platen closing 153 kN Djdpfx Aez Hngyscyswd Size of mould platens (h x v) 2210 x 1910 mm Distance between tie bars (h x v) 1570 x 1270 mm Mould opening stroke 2350 mm Mould height min/max 700/1400 mm Max. daylight 3050 mm Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 2173 bar Stroke volume 3721 ccm Shot weight (PS) 2642 gr. Injection rate 659 ccm/s Screw speed 150 1/min Plasticising rate max. 105 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 13,00 x 4,00 x 3,00 m Total machine weight 64000 kg Max. mould weight 29000 kg Accessories: - Anti vibration pads - Sepro Robot 4050 S3 Trans Additional Options: - 3 x core pulls on movable plate - 3 x core pulls on fix plate - 2 x air valve - 6 x hydr. shot off nozzles - 16 x hotrunner controller - Robot interface according to Euromap 67

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Dedpfowq D Efex Acyowd Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: good (used), Year of construction: 2013, clamping force: 13,000 kN, _KRAUSSMAFFEI KM 1300-8100 MX_ Year: 2012 Working hours: 52,000 h Clamping force: 1,300 tons (13,000 kN) Controller: MC5 _CLAMPING UNIT_ • Tie bar distance (H × V): 1,570 × 1,270 mm • Platen dimensions: 2,210 × 1,910 mm • Opening stroke: 2,350 mm • Mould height min./max.: 700–1,400 mm • Max. daylight: 3,050 mm • Max. mould weight: 29,000 kg _INJECTION UNIT_ • Screw diameter: 95 mm • Shot volume: 3,721 cm³ • Shot weight (PS): 2,642 g • Injection pressure: 2,173 bar • Injection rate: 659 cm³/s Dodpfx Aj Agcuqocyewd • Plasticising capacity: 105 g/s _ADDITIONAL EQUIPMENT_ ✅ Sepro Robot 4050 S3 Trans ✅ 6× Hydraulic core pullers (3+3) ✅ 6× Hydraulic shut-off nozzles ✅ 16× Hot runner control zones ✅ 2× Air valves ✅ Euromap 67 robot interface ✅ Anti-vibration pads _DIMENSIONS & WEIGHT_ • Dimensions: approx. 13 × 4 × 3 m • Machine weight: 64,000 kg • Pump motor: 110 kW • Heating capacity: 59 kW

Condition: excellent (used), double pump for Krauss Maffei Maschines Dsdpfxog I Uycj Acyowd SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978

Year of construction: 2006, condition: used, NNP Food preparation machine Dwjdpfx Aeb Ua Eyscysd Stainless machine with heads for Slicer/dicer and grater ideal for cheese, vegetables etc. Grids included 12x12, 8x8,

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Dwjdpfxju Hxm Us Acyod Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg Dwedpfxsg Ey Ufj Acyed *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours, in near-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in near-new condition. It is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but, as part of the site relocation, has now been released for sale. The order confirmation from ENGEL to NYPRO can be found in the documents. Dwedpfx Aswb Dl Tecysd The original new price was approximately €330,000, including the crane. Please note: Items 10.0064 to 10.0070 (eFlomo) are not included in the scope of supply! This was not implemented. Everything else as per the order confirmation is fully installed in the machine. I can provide you with the technical data upon request. Included in the price: dismantling the crane and packing it onto two Europallets. Also, removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located at the Nypro facility near Karlsruhe and can be inspected there. Delivery is possible within a few days. Below, in the documents, you will find the order confirmation from ENGEL to Nypro!

Year of construction: 2022, operating hours: 150 h, condition: new, Capacity up to 8000 kg/hour with Raetzmuehle 5.5 kW with inclined conveyor belt (plastic chain); speed infinitely adjustable High-performance blower Cleaning water circulation pump Dwsdpfx As Hnafscyed

Year of construction: 2020, condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Made of stainless steel. Deaeration takes place in a vacuum container. operating temperature approx. 50°C. Water-ring-pump for achieving vacuum in the container integrated. Dsdpfxocl Tt Ro Acyowd The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h