Used Upright drilling machines for sale (68)

Condition: ready for operation (used), machine/vehicle number: 2522, See pictures for condition and details Cgoln Nretxtfvehuot

Condition: good (used), For sale is a used pillar drill from the manufacturer Infratirea: Technical data: Drilling capacity (steel): 50mm Thrust: 355mm Quill stroke: 280mm Celnjvuy A Ao Nrhusgt 12 spindle speeds: 31.5 - 1400 rpm 9 feeds: 0.11 - 1.72 mm/rev Weight: approx. 1500 kg Dimensions (LxWxH): 1200x700x 2600mm If you have any questions about the machine, please feel free to contact us.

Condition: repair required (used), Connected load 380V 3.6A, total height 2900 mm, table height adjustment with handwheel, 5 speeds: 275/450/810/1400/2000 rpm, V-belt guard self-construction Celnsiyp R Rj Nrhusgt

Condition: good (used), Year of construction: 1976, Stock number: 2909 Manufacturer: ORADEA - Infratirea Cgoln Nsu Tip Rjrhust Year of manufacture: 1976 Machine number: 62981 Type: 6GMA1 Mounting: MK5 Drilling capacity: 63 mm Table: 600 x 700 mm Clamping surface: 450 x 580 mm Distance spindle - table min/max: 200 / 890 mm Vertical adjustment of the head: 690 mm Stroke: 200 mm throat depth: 350 mm Speeds: 56 to 1,220 rpm Feed rate: 0.1 / 0.16 / 0.25 / 0.4 mm/rev Accessories / equipment: Thread cutting option, automatic feed, integrated coolant pump Connection: 4.15 kW Weight: 1.1 t Footprint: 700 x 1,200 mm Dimensions: 700 x 1,200 x 2,600 mm

Year of construction: 1987, Condition: used, 1 pillar drilling machine ALZMETALL AX 3SV, serial no. 5739, year of manufacture 1987 Csln Nsi Apu Tsrhuogt

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 10972104005, thread cutting capacity: M 24, Equipment: lighting, rotational speed infinitely variable, type plate available, - Heavy, solid cast design - Infinitely variable speed control - High concentricity due to hardened and ground main spindle - Thread cutting device - Main switch - Large, height-adjustable protective screen with safety switch for maximum user protection - Drilling depth stop - 24V DC electronics - Electronic quill feed - Dirt and water-resistant, easy-to-clean membrane keypad - Optional foot switch for switching between clockwise and counter-clockwise rotation and for thread cutting - Programmable feed cut-off - Gearbox in oil bath Csln Nrhst Ua Syjuegt Drilling and thread depth adjustment Depth selection freely adjustable via the digital display. In tapping mode, the machine automatically switches from right to left and switches off automatically when the drilling depth is reached. Workpiece counter for drilling / threading

Condition: new, Year of construction: 2025, The Z5040L industrial gear drill ensures optimal drilling results. It is characterized by solid workmanship and high power, so it can be used both in repair plants and in industrial production. The drill is equipped with a massive, adjustable cube table, auto-feed, a solid gear with a wide range of rotational speeds, right/left rotation and an adjustable drilling depth limiter with a scale. The drill has a built-in cooling system. CORMAK Z5040L pillar drill - description of the machine Automatic spindle feed Cube table rotates around the column, tilts 45° to the right/left Workspace lighting Possibility of threading Work table and base equipped with T-slots Right/left rotation Drilling depth indicator CORMAK Z5040L pillar drill - technical parameters MAX. DRILLING DIAMETER 40mm NUMBER OF GEARS 18 THREADING STEEL/CAST IRON 22/24 mm DISTANCE FROM THE CENTER OF THE SPINDLE TO THE SURFACE OF THE COLUMN 350mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 770mm MAX. DISTANCE OF THE SPINDLE TIP FROM THE BASE 1215 mm MAX. SPINDLE TRAVEL 185mm SPINDLE TAPER MK 4 FEED RANGE 0.1mm; 0.2mm Colnjridxxs Nrhujgt SPINDLE SPEED RANGE 75 - 1450 rpm WORKTABLE DIMENSIONS 560 x 520 mm SIDE TABLE DIMENSIONS 560 x 250 mm BASE DIMENSIONS 730 x 500 mm WIDTH OF T-GROOVES 18mm ENGINE POWER 1.5 kW COOLANT PUMP POWER 75 W OVERALL DIMENSIONS 2230 x 560 x 850 mm WEIGHT U 510 kg

Condition: excellent (used), WMW SABO Standard 40 column drilling machine - 4 independent drilling stations - maximum diameter of drilling in steel [mm] - 40 Coln Nrjuhi D Dehuogt - distance of spindle axis from the stand guides [mm] - 320 - distance of spindle from table surface [mm] - 0÷710 - vertical travel of the table [mm] - 200 - Morse spindle stool no. - 4 - number of spindle speeds - 9 - range of spindle speeds [rpm] - 63÷1000 - range of spindle feed rates [mm/rev] - 0.10÷1.6 - possibility to sell a single column 1800EUR / pc

Condition: new, Year of construction: 2025, The Z5028W industrial gear drill is a machine that combines power and precision, which is important in a variety of applications. It is characterized by a solid construction, which ensures efficient and precise drilling. The drill has a large height-adjustable work table, 12 spindle speed ranges, right/left rotation and an adjustable drilling depth limiter with a scale. The drill has a built-in cooling system. CORMAK Z5028W pillar drill - machine characteristics Workspace lighting Possibility of threading Base with T-slots Right/left rotation Drilling depth indicator Built-in cooling system CORMAK Z5028W pole drill - technical parameters MAX. DRILLING DIAMETER 28mm SPINDLE TAPER MK3 SPINDLE TRAVEL 130mm DISTANCE FROM THE CENTER OF THE SPINDLE TO THE SURFACE OF THE COLUMN 250mm DISTANCE FROM THE SPINDLE END TO THE WORK TABLE 125 - 825 mm DISTANCE FROM SPINDLE TIP TO BASE 1220mm SPINDLE OPERATING HEIGHT (MAX FROM FOUNDATION LEVEL) 1340mm COLUMN DIAMETER 97mm SPINDLE SPEED RANGE Cgolneridquo Nrhuet 75 - 3200 rpm NUMBER OF GEARS 12 WORKTABLE DIMENSIONS 480 x 380 mm BASE DIMENSIONS 360 x 535 mm OVERALL HEIGHT 2050 mm WIDTH OF T-GROOVES 14mm ENGINE POWER 1.1 kW / 400V LIBRA 230 kg DIMENSIONS 700x480x1810 mm

Condition: new, Year of construction: 2025, A powerful and efficient pillar drill for industrial use, 190 cm high. DEVICE EQUIPPED WITH AUTOMATIC SPINDLE FEED. The drill has an efficient cooling system with a metal spout. Equipped with 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. The machine has the function of automatically changing the direction of rotation while threading. Two work tables provide many processing possibilities. The latest generation induction motor with a properly designed belt transmission ensures high power and efficiency of the drill. Machine characteristics AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch IT HAS 8 ROTATION SPEEDS ROTATION SPEED RANGE: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Cjlneridqbe Nrhujgt The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel Built-in LED lamp High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M20mm COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm WORKTABLE LIFTING RANGE 820mm RANGE OF TABLE ROTATION AROUND THE COLUMN 360° MAX. SPINDLE-BASE DISTANCE 1235mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS 8 TABLE DIMENSIONS 334 x 334 mm BASE DIMENSIONS 310 x 380 mm MACHINE HEIGHT 1900mm ENGINE POWER 1.5 kW FEED MOTOR POWER 0.12 kW POWER 400V NET WEIGHT 310 kg SIZE OF THE PACKAGE 1040 x 640 x 2050 mm

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Csljridnvsn Nrhujgt Machine description smooth regulation of spindle speed LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gearbox YES Base dimensions 580 x 415 mm Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: new, Year of construction: 2025, The Z5050 industrial column drill is a product intended for both small workshops and high-intensity plants. One of the advantages of the drill is its heavy, massive and stable construction and a thick, stiff steel column. The reliable engine will cope with the hardest work. The machine is equipped with a wide speed range, auto spindle feed and a threading function. A column drill made of high-quality materials and using modern technological solutions ensures long service life, reliability and durability. CORMAK Z5050 pillar drill - machine characteristics New aesthetic appearance and compact design Wide range of speed changes Easy and intuitive operation 180° work table Drill equipped with a cooling system Powerful spindle motor designed in accordance with IEC standards CORMAK Z5050 pole drill - technical data MAXIMUM DRILLING DIAMETER 50 mm THREADING (STEEL, CAST IRON) M22, M24 SPINDLE DISTANCE FROM COLUMN SURFACE 370 mm SPINDLE DISTANCE TO WORK TABLE 80-800 mm MAXIMUM BASE SPINDLE DISTANCE 1325 mm SPINDLE FEED 210 mm TABLE ROTATION ANGLE +/- 45° SPINDLE CONE MK 4 NUMBER OF GEARS 18 SPINDLE SPEED 55, 80, 95, 120, 145, 160, 180, 240, 270, 335, 400, 440, 500, 600, 750, 965, 1125, 1450 rpm NUMBER OF SPINDLE FEEDS 4 degrees SPINDLE FEEDS 0.1; 0.2; 0.3; 0.4 mm/rev. COLUMN DIAMETER Ø 190 mm TABLE DIMENSIONS 580 x 580 mm BASE DIMENSIONS 860 x 580 mm WIDTH OF T-Slots 2-18mm ENGINE 2.2/3 kW 400 V 960/1440 rpm COOLANT PUMP 75 W OVERALL DIMENSIONS 1050 x 590 x 2150 mm WEIGHT U 760 / 860 kg CORMAK Z5050 pillar drill - standard equipment Drill chuck 1-13 mm Cgoln Nrheridynsujt Morse reduction sleeves - 3 pcs. Lighting installation Cooling system

Condition: new, Year of construction: 2025, The Cormak 25 column drill is a very efficient column drill, which is standardly equipped with a two-speed 1000 W motor with a rotation direction switch for right and left. The excellent design makes this device work very precisely. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. The set includes a 123 mm vice and a drill chuck. FREE MAGNETIC CHIP COLLECTOR ZW580! Technical data Maximum drilling diameter 25 mm Grip capacity 16 mm MK3 self-locking chuck The distance between the spindle and the column is 216 mm Maximum spindle stroke 80 mm Maximum distance of the table from the spindle 640 mm The distance between the pin and the column is 215 mm Maximum distance of the base from the spindle holder 1136 mm Table dimensions 355x355 mm Column diameter 92 mm Motor power 1000 W Csleridn Son Nrhuogt Overall dimensions 1635 x 642 x 356 mm Net weight 85 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 160 240 290 350 410 480 530 590 660 720 1190 1350 1510 1970 2100 3000 700 min-1 80 120 140 170 200 240 260 290 330 360 590 670 750 980 1050 1500 Standard equipment 1000W two-speed motor Left and right rotations DTR in Polish CE declaration Optional equipment cooling system feeder

Condition: new, Year of construction: 2025, PROMOTIONAL PRICE! The industrial hull drill is used for drilling, tapping, threading, etc. The series of drills is characterized by incredible accuracy, wide speed range, easy maintenance and use. Machine characteristics Machine description WK50 is one of the universal vertical drills with a rectangular column. The maximum drilling diameter is 50 mm (in the case of a pressure of 50-60 kg/mm2 in steel, in the case of cast iron with a hardness of HB = 220, the drilling diameter is 55 mm). It can also be used for reaming, enlarging holes, countersinking, threading, etc. It is characterized by high efficiency, stiffness, accuracy, low noise level and a wide range of operating speeds. Easy to maintain, widely used in production workshops, also suitable for mass production. TECHNICAL PARAMETERS MAXIMUM DRILLING DIAMETER 50mm SPINDLE TAPER MK5 MAXIMUM FEED FORCE 1600 kg MAXIMUM SPINDLE TORQUE 35 kG.m DISTANCE FROM THE SPINDLE AXIS TO THE COLUMN 335mm SPINDLE TRAVEL 250mm HEADSTOCK TRAVEL (MANUAL) 200mm NUMBER OF SPINDLE SPEED 12 SPINDLE SPEED 31.5, 45, 63, 90, 125, 180, 250, 355, 500, 710, 1000, 1400 rpm SPINDLE FEED 0.056, 0.112, 0.16, 0.224, 0.315, 0.45, 0.63, 0.90, 1.80 mm/rev SIZE OF WORKTABLE 800x320mm Coln Nrorigc Nehuogt DISTANCE OF THE SPINDLE END TO THE WORK TABLE 550mm MAIN ENGINE POWER 3 kW COOLANT PUMP PERFORMANCE 12 l/min DIMENSIONS 1300x1200x2530mm WEIGHT 1350 kg Standard equipment Lighting installation Cooling system

Condition: new, Year of construction: 2025, A powerful and efficient pillar drill for industrial use, 190 cm high. The drill has an efficient cooling system with a metal spout. The machine has the function of automatically changing the direction of rotation while threading. Equipped with 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. Two work tables provide many processing possibilities. The latest generation induction motor with a properly designed belt transmission ensures high power and efficiency of the drill. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch It has 8 rotation speeds Rotational speed range: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel Built-in LED lamp High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M20mm Cgslnoridp Ns Nrhuot COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm WORKTABLE LIFTING RANGE 820mm RANGE OF TABLE ROTATION AROUND THE COLUMN 360° MAX. SPINDLE-BASE DISTANCE 1235mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS 8 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 380 x 400 mm MACHINE HEIGHT 1900mm ENGINE POWER 1.5 kW POWER 400V NET WEIGHT 310 kg SIZE OF THE PACKAGE 1040 x 640 x 2050 mm

Condition: new, Year of construction: 2025, The CORMAK ZS-40B industrial geared pillar drill is a solid tool with great potential. Equipped with a height-adjustable swivel head, automatic threading device and a precision handwheel, it ensures flexibility and accuracy in work. The powerful engine guarantees high drilling efficiency, and the solid construction and hardened oil gear wheels ensure stability and durability. The drill comes with a set of threading holders, extending the capabilities of this professional tool. Additionally equipped with autofeed and cooling. Machine characteristics Very high work flexibility thanks to the swivel, height-adjustable head Cooling system L/R rotation, automatic threading device Precision handwheel with depth scale Hardened oil gear wheels High stability and quality of processed elements thanks to a solid base. Cgolneridv Se Nrhuot Powerful motor ensuring good drilling performance. Rigid, thickened column with a polished surface Large turntable with height adjustment Possibility to set a vice Technical data DRILLING DIAMETER (CAST IRON/STEEL) 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE DISTANCE FROM THE COLUMN AXIS 260mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 754mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1270 mm SPINDLE TAPER MK4 SPINDLE SPEED 50 - 2520 rpm. NUMBER OF GEARS 6 FEED RANGES 0.12; 0.18; 0.25 mm/rev DIMENSIONS OF THE WORKTABLE SURFACE 354x575mm OVERALL HEIGHT 2120mm ENGINE POWER 1.5 kW POWER 400V/50Hz WEIGHT U 350kg

Condition: new, Year of construction: 2025, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Cgjln Nreridpwehust Gravity cooling system Optional equipment feeder

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 100mm vice. Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth limiter, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 20mm RPM RANGE 190-2700 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 120mm DISTANCE OF SHAFT FROM COLUMN 170mm DISTANCE OF SHANK FROM THE BASE 1060mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 660mm COLUMN DIAMETER 70mm TABLE DIMENSIONS 280x280mm BASE DIMENSIONS 480x290 mm ENGINE POWER 750 W HEIGHT 1650mm WEIGHT 75kg Cgolevuf Iken Nrhuet