Pillar Drilling Machine

ALZMETALL AB3/ES

Condition: good (used), ALZMETALL AB 3 ES column drilling machine Speed: 80–1420 rpm Spindle: Morse taper 3 Bedpfxsxxh Ane Abbodk Mounted on running gear.

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm Bsdjv Ehftjpfx Abbsdk bore stroke 200 mm table surface area 720 x 5 mm

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds Bsdpfxevu Dv Ho Abbsdk - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: used, Year of construction: 1987, Column Drilling Machine Manufacturer: ALZMETALL Model: AB 3/ES Year of manufacture: 1987 - workshop tested Machine no.: 23348 Standard features: - Infinitely variable speed control from 260 to 3,500 rpm - Analog speed display - Operating manual Other important technical data: - 28 mm drilling capacity in ST 60 - 160 mm quill travel - Spindle taper MK 3 - 115 mm column diameter - 500 x 300 mm table dimensions Bdodpfx Abew Id Uajbek

Condition: used, machine/vehicle number: 242350148, -WT 106- Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Technical data: Bjdpfx Abelf Evcobedk - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle

Condition: excellent (used), Year of construction: 1979, Drilling capacity 32 mm Spindle taper MT 3 Throat 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm, stepless Motor power 0.9 and 1.3 kW, pole-switchable Power connection 380 Volt, 50 Hz Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless via variator Table height adjustment via handwheel Machine lamp Quick-release drill chuck 1 to 13 mm Required space L x W x H 1200 x 650 x 1900 mm Weight 400 kg Bdsdpfx Absw H Namsbsk very good condition

Condition: good (used), Column Drilling Machine ALZMETALL AB 3 ES - Drilling capacity / steel: 35 mm - Throat depth: 280 mm - Table size: 600x470 mm - Drilling stroke: 180 mm - Spindle taper: MK 3 - Infinitely variable speed control - Drilling depth stop - Speed indicator - Drill chuck Bdedpfx Asw Dcmbobbok - Documentation Dimensions: LxWxH: 1.2x0.8x2 meters / Weight: 450 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1998, Offer 25232 Technical Specifications: - Drilling capacity in steel ST 60: 32 mm - Drilling performance in steel ST 60: 46 mm - Thread cutting unit up to: M 30 - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - Throat depth: 300 mm Bdsdpfswyupyox Abbjk - Table with 2 T-slots: 615 x 430 mm - Column diameter: 145 mm - Power feeds – electromagnetic: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds with digital display: 80 – 4000 rpm - Drive: 400 V / 1.4 / 2.2 kW - Electric foot switch - Lighting - Machine vice - Required space approx.: W 650 x H 2100 x D 1100 mm - Weight approx.: 450 kg

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Bdsdpfx Aow D Hi Tjbbjk

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 28 mm throat 290 mm bore stroke 180 mm table surface area 515 x 300 mm spindle taper MT 3 spindle turning speed range 65 - 1750 U/min boring spindle diameter 40 mm Bdjdjwk N Rajpfx Abbek table adjustable in height 562 mm table swivelable 360 ° distance between table/spindle 79 / 641 mm weight of the machine ca. 0,4 t dimensions of machine L x W x H 0,70 x 0,40 x 1,80 m - machine out of teaching shop -

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Bedpjv Dvkzsfx Abbodk Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Bdedpfxowg Hd Nj Abbjk Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system!

Condition: excellent (used), Year of construction: 1976, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1976 Bjdpfjwg Hdvex Abbodk With coolant system!

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm Bdodpfx Abjvzhf Sobjk max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation