Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm Njdpfx Aovuufxealslh distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1964, pressure 10 t throat 235 mm Nlodpfxovgnqfo Aaloh stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Nljdpjhl Npqjfx Aaloh Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Nledpjxl Tmfsfx Aalsh Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: used, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min Njdsxpx Ddepfx Aalolh .. main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 .. feed velocity min.: 5 m/min .. feed velocity max.: 50 m/min STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, Technical Data – Solidturn 200/1500 B – Universal Lathe Working Area Distance between centers 1500 mm Max. turning diameter over bed 400 mm Max. turning diameter over carriage 225 mm Max. turning diameter over gap 530 mm X-axis travel 330 mm Z1-axis travel 130 mm Gap length 320 mm Bed width 330 mm Cross slide swivel range 360° Main Spindle Speed range (15) 22 – 2000 rpm Spindle bore 85 mm Spindle mount Camlock D1-6 Spindle taper MT 5 Feed Feed X-axis 0.036 – 2.019 mm/rev Feed Z-axis Nsdpfx Aaewuvacololh 0.072 – 4.036 mm/rev Thread Cutting Metric thread cutting 0.5 – 28 mm Diametral thread cutting 8 – 56 mm Module thread cutting 0.5 – 3.5 mm Whitworth thread cutting 1 – 56 TPI Tailstock Tailstock quill diameter 65 mm Tailstock taper MT 5 Tailstock quill stroke 120 mm Tailstock lateral adjustment ± 5 Drive Power Main spindle motor power 7.5 kW Supply voltage 400 V Dimensions and Weights Dimensions 2920 x 1150 x 1800 mm Weight 2240 kg

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm Nodpfx Aasvuk Iisljlh ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, pressure 6 t dayligth 180 mm spindle diameter 32 mm throat 115 mm ram stroke 90 mm table surface area 300x270 mm Nledpfxjvgnnwo Aaloh weight of the machine ca. 70 kg dimensions of the machine ca. 800 x 1350 mm 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m².

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Nledegp T Euspfx Aaljh Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: used, Year of construction: 2005, functionality: fully functional, OMERA-ROSS 500-R2-M2P8 Eccentric Press Description: Capacity (Tons): 500 Table Size: 2300 x 1400 mm Ram Stroke: 300 mm Nodexfk E Eepfx Aalelh Minimum Number of Strokes: 12-44 SPM Subtype DM Cdc: DM2B CE Marked: Yes Eccentric Drive Linkage System: Knuckle-joint flywheel with screw, eccentric type Ram Width: 2300 x 1300 mm Ram Mounting: 200 mm Number of Pressure Points: 2 Number of Guides: 8 Ram Adjustment System: Guided wedge ball seat Daylight (Slide Opening): 1150 mm Side Window (Between Uprights): 1020 mm Weight: 66 tons (66,000 kg) Foundation Depth: 1000 mm Motor Power: 76 kW Electrical Panel Connections - Operation - Condition - To be overhauled Front/Rear Photocells: Yes Front/Rear Safety Guards: Yes Mechanical/Hydraulic Overload Protection: Yes Accessories / Other data: Compact Feed Line Presses 600x4 Motor Power: 76 kW Table Length: 2300 mm Table Width: 1400 mm Strokes per minute: up to 44 spm Distance between uprights: 1020 mm Total Weight: 66,000 kg

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg Nodpeu Icwgjfx Aalolh 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Year of construction: 1966, condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm Nodpfxeir I Sle Aalolh dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Condition: used, Year of construction: 2011, pressure 620 t distance between columns 2250 mm stroke 1250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm table surface area 2200 x 1280 mm ram surface 2200 x 1500 mm Nodpfx Ajvuudhoalelh table height over floor 800 / 1000 mm column travel -side 750 mm feed down 10 - 250 mm/sec feed up 10 - 500 mm/sec working feed 1 - 24 mm/sec oil volume 2000 l power capacity 45,0 + kW weight 42,0 t Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m year of manufacture 1997 - overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand operation no foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - video at seller's site before dismantling available

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Nodpfsxnr Dhex Aaljlh Application Types Bending

Condition: used, Schmidt Laboratory Press MB 10 300 Item description: For sale is a high-quality Schmidt MB 10 300 laboratory press. The machine is in ready-to-operate condition and has been well maintained at all times. Ideal for laboratory applications, research, and precise pressing operations. Technical highlights: - Press force: max. 100 kN - Retraction force: approx. 43 kN - Operating pressure: approx. 200 bar - Piston diameter: 80 mm, piston rod diameter: 60 mm Nlodpfx Aaexg Hyboljh - Stroke: 300 mm - Heating platens: 300 x 300 mm, electrically heated up to 200°C - Heating power per platen: 3 kW - Closing speed: 23 mm/s, opening speed: 0–25 mm/s manual / 60 mm/s automatic - Hydraulics: Internal gear pump with 63 l/min, drive power 3 kW - Electrical connection: 3 x 400 V, 50 Hz - Control voltage: 24 V Special features: - 4-column vacuum design for stable guidance - High-quality, precision-ground parallel heating platens - Separately controllable electronic temperature regulation with ±2 K accuracy (PT100) - SIEMENS PLC control system with two-hand safety operation - Automatic operation with programmable pressing and heating cycle - Adjustable press stroke with upper and lower limits - Clearly arranged control panel for easy operation - Robust, durable construction with integrated thermal insulation Dimensions and weight: - Width: 1140 mm - Height with safety door open: 1935 mm - Depth: 1350 mm - Operating height: 1110 mm - Weight: 920 kg Color scheme: - Machine frame: slate grey RAL 7015 - Control cabinet & safety enclosure: red RAL 2002 - Functional components: galvanized Condition: used Scope of delivery: (see image) - Schmidt MB 10 300 laboratory press - Integrated PLC control with operator device - Hydraulic unit and all function-related connections (Changes and errors in technical data reserved!) We will be glad to answer further questions by phone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Coil reel with 2000 mm coil diameter, double-sided reversing reel, hydraulic, weight per side 2000 kg Nlsdpoxd H H Nofx Aaljh

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. Nlodeu Nfh Djpfx Aaloh *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Nlsdjuh U Etepfx Aaljh Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: used, Year of construction: 1990, pressure 200 t distance between columns 1400 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1300 x 1100 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 700 x 700 mm capacity of ejector in ram 10 t ejector stroke in ram 50 mm table height over floor 930 mm side window 770 mm ram surface 1300 x 1100 mm speed down 400 mm/s speed up 410 mm/s Nledpfx Aajvut T Ioleh working speed 20 - 50 mm/s return capacity 30 t oil volume 1350 l power requirement 70,0 kW weight 23,0 t dimensions (WxDxH) 4,5 x 3,0 x 3,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, controllable dependent on pressure/time and way, cutting impact cushioning No foundation pit necessary

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Nlodpfsxfl Axex Aaljh Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Technical details: pressure: 25 t Nedpfx Aovc Awxjalolh stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Nsdpfx Aajvut Hnslelh Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm Nodpfxefrzlme Aalslh ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t Nledovut D Tjpfx Aaleh required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Nsdpovuubgofx Aalelh Video at seller’s site before dismantling available