Single Column Press - Hydraulic

RHTC PPC 28

Condition: new, functionality: fully functional, pressing force: 28 t, stroke length: 150 mm, table width: 300 mm, table length: 325 mm, throat depth: 225 mm, TECHNICAL DETAILS Pressing force: 28.0 t Throat depth: 225 mm Stroke: 150 mm Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Godpfxeyg Dr Ae Af Tsbp Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Integrated pressure gauge Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Gbjdjxc Eucopfx Af Tsp

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm Gsdpjvuud Uofx Af Tobp table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced. Technical data available on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust hand spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the typical technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the frame size/frame width, and the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle fully raised) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Design: Solid cast iron stand in a C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel as it is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool mounting. Gjdpfxjwxyn Ej Af Tobp Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolts to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the position of the spindle). Width (stand): approx. 500 – 600 mm. Depth (base): approx. 800 – 1,000 mm.

Condition: used, Year of construction: 1990, pressure 25 t Gbjdet Hw Ezspfx Af Tjp throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m Gbedpfxoul Eawo Af Top

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Gbjdpfx Afopu R Nve Top Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Gbedpfsr I E Itex Af Top Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m Gbodpfet Hwrzsx Af Tsp

Condition: ready for operation (used), Hertweck P4 hydraulic press stamp press You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Gsdpfxevux Spe Af Tebp Deviations from technical data and errors in the description of the article can occur and are reserved.