Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site Hfodpsxftcasfx Aaysr

Condition: used, Year of construction: 2006, 4 movable beams Working dimensions: Height 269cm/ 360cm Shoe width 100mm 30mm diameter cylinders Double-acting cylinders Vertical cylinder stroke 150mm Horizontal cylinder stroke 100mm Hydraulic locking shoes 1.73kW pump 160 bars of pressure 380V Hfedsxu Ddaepfx Aaysr

Condition: excellent (used), Catalogue number 7737 Hedpfoxbr I Hox Aayefr TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction Hodpfx Aaexvitijyjfr - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm height min: 150 mm, max: 1400 mm depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press Hfedsxmr Spjpfx Aayer The machine is complete and fully operational Working range 3000 x 2000 mm

Condition: good (used), Year of construction: 1983, functionality: fully functional, Bürkle U60 veneer press hydraulic Year of manufacture: 1983 The press comes from a training workshop and is in good condition. Press area: 2200 x 1250 mm Opening height: 400 mm 4 cylinders, pressing force: 600 kN Hfodpfxsx Af Sbo Aayor Connected load per heating plate: 7 kW Weight: 3000 kg Dimensions: 2750x1380x1785 mm

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Set of machine feet for working height 500 mm per unit. Hodpfx Aaoxy Tl Deyofr Location: Garbsen

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Hjdjxzfw Uepfx Aayefr Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: excellent (used), CATALOG NUMBER 7153 Hfodpopu Avmefx Aaysr TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (H/W): 920x870mm - Output: approx. 110kg/h - Automatic machine operation - Oil cooler - Oil pre-heating - Inspection window - Motor: 7.5kW - Dimensions (L/W/H): 1750x1300x1460mm - Weight: 825kg ADVANTAGES – Unpainted – Italian production – Used briquetting press – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may vary in case of significant fluctuations)

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 5328, total width: 1,350 mm, total height: 1,500 mm, total length: 2,100 mm, briquette diameter: 70 mm, overall weight: 1,500 kg, type of input current: AC, input voltage: 380 V, oil tank capacity: 250 l, funnel diameter: 1,200 mm, power: 9.2 kW (12.51 HP), year of last overhaul: 2024, The press is in very good condition, was recently overhauled by a specialist, has a new control cabinet and has been stored in the warehouse since then. It can be inspected and tested. The hydraulic oil and the die can be cooled for continuous operation. It has a pressing capacity of 140 - 175 kg/h. Hsdsx H A A Iepfx Aaysfr

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Hsdpfx Aasxmr Rxoyefr Powered by a hydraulic unit.

Condition: excellent (used), Pressing Area: 2500 x 1300 mm Number of Press Cylinders: 4 Total Pressing Force: 90 t Operating Voltage: 3 x 400 V + N, 50 Hz Total Connected Load: approx. 20.3 kW Space Requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Hodperivrwefx Aaysfr Weight: approx. 3,600 kg Hydraulic Heated Platen Press Under-piston Design ELKOM Electric Heating Plates Pressing Pressure steplessly adjustable via pressure switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating elements Analog temperature display for both heating plates Emergency stop safety cable Rack and pinion equalizer Main switch CE-compliant NEW ALUMINIUM COVER PLATES Note on Used Machines: • Subject to errors in technical data and prior sale. • Quoted prices are ex location, loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. The buyer is welcome to inspect the machine on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Hodpfevvkmbsx Aayefr

Condition: new, Year of construction: 2021, machine/vehicle number: MR004301, Manually operated glue presses with a maximum height of 1800 mm. The price is for a ready-to-use unit, ex Staphorst. On-site delivery is available at an additional cost. The press is equipped with the following options: Hfodpfx Aajvcy Emoysr - Manual pressure unit at the front Technical specifications: - Clamp cylinder stroke: 60 mm - Wheel set: Yes - Maximum length: 2500 mm - Maximum height: 1800 mm - Number of vertical pressure bars: 4 - Maximum cylinder pressure weight: 450 kg - Serial number: 8877

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side Hfodpfsim Sffox Aayer - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: used, Year of construction: 1983, functionality: fully functional, Frame press for sale. Hfodpfex Ark Dex Aayjr Operating voltage: 380V 50Hz Control voltage: 220V 50Hz

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The production line includes: - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. - A feeding screw that brings the product to the Pellet Press - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings Hfjdpfsxvp Rhjx Aayor Dwjbngmhexd U Izsd Eed - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus Hedpfedx R Dmox Aaysfr • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Hfodpfx Aaovvkl Djyor

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7559 Hfedev Dirxjpfx Aayer TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x4 pcs - Pneumatic vertical clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions L/W/H: 4270x1600x2000 mm - Weight approx.: 800 kg ADVANTAGES – Two working fields – Gluing length 3300 mm – Pneumatic cylinders – Used press, in very good condition Net price: 10,900 PLN Net price: 2,600 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Hodpfsdx R D Djx Aayofr Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm Hjdpsxa Ephjfx Aayofr - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Hfsdsdx R Dtepfx Aayor Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: excellent (used), CATALOG NUMBER 6933 TECHNICAL DETAILS - loading areas: 1 - front: manually adjustable clamping beams, 6 pcs - top: pneumatic pressing beams, 4 pcs - length of each pressing beam: 795mm - side: pneumatic clamps, 2 pcs - max length of glued components: 3300mm Hfodpfx Aaok Uxwwsyor - max height of glued components: 1300mm - max thickness of glued components: 170mm - dimensions (L/W/H): 4200x800x1960mm - weight: 820kg ADVANTAGES – manufactured in Poland – mobile – unpainted – used press, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) Hfjdpfx Asdx Daaoayjr • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening