Used planing & moulding machines for sale (495)

Condition: excellent (used), Weinig Four-Sided Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm Hfjdpfex E Rtxex Aaysr - Spindle configuration: bottom 5.5 kW, right and left spindles driven by a 5.5 kW motor, top spindles powered by 5.5 kW - Electrically height-adjustable feed rollers - Infinitely variable feed speed - 4 steel planing knives, each with 4 blades The machine is in very good condition and runs smoothly without vibrations.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Hfedpfjxlcufex Aayer Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: used, Year of construction: 1990, Bottom spindle Right side spindle Left side spindle feed section Bottom spindle Bottom spindle Hedpfx Aoxuh Treayjfr Top spindle Top spindle Bottom spindle machine comes with feeding unit

Condition: excellent (used), Year of construction: 2007, Thomas Pettersson (Sweden) moulder infeed and outfeed. 2x 1.5kW inverter driven feed motors (80 m/min) on the accelerator. 4x driven feed rollers on the accelerator. Minimum timber length 400mm Max timber length 3500mm Crossfeed infeed table to accelerator with 6x chains. Outfeed table with 4x crossfeed belts. Hfodpsu Ucpmefx Aayor 1st belt is wide to allow crossfeeding of very short pieces very simply.

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Hsdpfsxpn T Uex Aayofr Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Hfedpfxsxn Upts Aayor

Condition: excellent (used), Leadermac LMC 525 Four-Sided Wet Planer - Maximum planing width: 25 cm - Maximum planing height: 20 cm - Bottom spindle: 5.5 kW Hodsx E Rh Aspfx Aayjfr - Right spindle: 5.5 kW - Left spindle: 5.5 kW - Top spindle: 7.5 kW - Universal spindle: 7.5 kW - 3 feed rollers in the table + lubrication pump - Hardened chrome tables - Stepless feed speed adjustment In excellent condition. Original. Nothing repainted.

Condition: excellent (used), Four-side planer SCM Compact 23 Hsdpfxexyv A Ej Aayjfr Working width: 230 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Bottom Right Left Top Spindle speed: 6000 rpm Two feed speeds: 6–12 m/min Adjustable spindles

Condition: good (used), Year of construction: 1996, functionality: unexamined, shaft diameter: 50 mm, power: 77.5 kW (105.37 HP), High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N Hfsdoxr Hbvepfx Aayjr System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 9409009, working width: 260 mm, planing height: 150 mm, planing width: 260 mm, working height: 150 mm, power of feed motor: 11 W, workpiece height (max.): 150 mm, workpiece width (max.): 260 mm, Equipment: rotational speed infinitely variable, For sale: four-sided planer, maximum planing dimensions 150x260 mm. Feed speed 6 – 36 meters per minute, infinitely variable. Motor 1 Bottom spindle 11 kW Motor 2 Right side Hfjdpfx Aoxlf E Teayer 11 kW Motor 3 Left side 11 kW Motor 4 Top spindle 11 kW Motor 5 Right side Frequency controlled 11 kW Motor 6 Left side Frequency controlled 11 kW missing Motor 7 Right side Frequency controlled Saw spindle 18.5 kW Motor 8 Left side Frequency controlled Saw spindle 18.5 kW Spindles 7 and 8 can saw over 200 mm wide together. All bottom feed wheels are driven, including a profile wheel for the first spindle.

Condition: used, Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line Hfodpexpn Tuefx Aayjr ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 spindles, Working width: 230 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 37 kW / 12-120 m/min Spindle configuration: 1 - Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2 - Right (11 kW) 3 - Left (11 kW) 4 - Top (37 kW) – with fully automatic straight jointer 5 - Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6 - Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer Hodpfxsxvmm Ts Aayefr 7 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 8 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 9 - Top (53 kW) – with hydraulic clamping, speed 3000-6000 rpm 10 - Bottom (53 kW) – with hydraulic clamping, speed 3000-6000 rpm Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table and 2 powered rollers in the table. Both table rollers are liftable. Table height adjustment with electronic digital display. Includes 2 heavy-duty lateral pressure rollers, diameter 140 mm, pneumatically actuated. Support feet, height 320 mm, for table height of 1190 mm. Marathon POWER Coating for machine table, fences and guide rails (excluding infeed table and special table plates). Special coating for the protection of table plates, fences, and guide rails against excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, particle board, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, with a diameter of 120 mm. Located in the area of the right and left spindle.

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Hedpfsvydwzjx Aayefr Width: 1200 mm Stock no: 2002037BXM

Condition: excellent (used), Casadei C4 Four-Sided Planer Hfjdpfx Ajxxiw Toayjr Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle configuration: 1. Bottom 2. Right 3. Left 4. Top Spindle speed: 6000 rpm Spindle diameter: 40 mm Two feed speeds: 6–12 m/min Tool size: 125–140 mm Feed powered by cardan shaft Technical documentation

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm Hfjdpfehuthyex Aayer max. planing height 280 mm planing shafts with strip knives immediately ready for use

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Right Left Hfsdpfx Aasvbwzveyor Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM Hjdpfjndcg Nox Aayefr 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION FWH 225mm 23kW total power

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Hodpfxexp U R Hj Aayefr

Condition: used, Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height settings Technical data: Planing width (finished size) min./max. 18 - 180 mm Planing height (finished size) min./max. 7 -120 mm Min. workpiece length (individual workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter of spindle 2,3,4 min/max 100 mm/180 mm Feed table length 1700 mm Max. chip removal 10 mm Knife shaft speed 6000 rpm Spindle diameter 40 mm Planer head diameter 120 mm Hodsvrvvtjpfx Aaysfr Jointing cutter diameter min./max. 120/137 mm Clamping length of vertical spindles 130 mm Clamping length of horizontal spindles 190 mm Feed speeds 6/12 m/min Feed roller diameter 120 mm Feed motor power 0.8/1.1 Kw Horizontal spindle motor power 5.5 Kw + 5.5 Kw Vertical spindle motor power 7.5 Kw Total motor output at 100% duty cycle 20 Kw Suction nozzle diameter 120 mm Minimum speed of the suction air 20 m/s Minimum volume of the suction 3200 m³/h Weight approx. 1300 kg Dimensions LxWxH 2950 x 1180 x 1510 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, tool diameter: 140 mm, warranty duration: 3 months, shaft diameter: 40 mm, number of spindles: 5, extraction connection diameter: 140 mm, input frequency: 50 Hz, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement: 1. Bottom 7.5kw 2. Right 3. Left 11kw 4. Top 7.5kw 5. Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed regulated by means of an inverter Feed drive on cardans Infeed table length 1970mm CE certificate Hfsdev Nkufspfx Aayor

Condition: excellent (used), functionality: fully functional, working width: 410 mm, planing width: 410 mm, Planer, jointer SCM F410 Specification: • condition - used, after inspection • manufacturer - SCM Hfodpfox E Srvjx Aayor • model - F410 • working width - 410 mm • table length - 2610 mm • fence adjustable for angle • motor power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max cutting depth - 8 mm • noise dampening combs at the shaft • motor brake • four-knife shaft, 120 mm diameter, for traditional knives • star-delta starter • dust extraction outlet - 150 mm dia • weight - approx. 650 kg • CE marked • overall dimensions: 261 x 90 x 110 cm (L x W x H) Additional information: • very good technical condition • the presented photos show the actual condition of the item for sale • possibility to start and test the machine on site.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer Hfedpfsxak N Hex Aayer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), Four-sided planer scm sintex nte Planing width max 180 mm Planing height max 105 mm 4 spindles Hfodpjvzr Drjfx Aaysr Bottom + top 7.5 kw Right + left 7.5 kw Electric height and width adjustments Worktop lubrication pump Headset Spindle speed 6000 rpm Spindle bore diameter 35 mm Weight 900 kg European CE certificate Technical documentation Very good condition

Condition: excellent (used), functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 140 mm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 140 mm, compressed air connection: 120 bar, workpiece width (max.): 230 mm, input voltage: 400 V, warranty duration: 2 months, number of spindles: 5, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 5 Spindle arrangement: Bottom: 5.5 kW Right Left: 7.5 kW Hodpjwv Slksfx Aayjfr Top: 11 kW Bottom: 5.5 kW Feed speed adjustable by inverter up to 30 m/min Feed motor: 4 kW Drive via cardan shafts Pneumatic hold-downs 3 axes controlled from the control panel (width, height, hold-down position) Air cushions in the worktable Infeed table length: 2470 mm CE certified DTR documentation

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 230 mm, type of input current: three-phase, number of spindles: 7, working range: 230 mm, blade shaft diameter: 50 mm, Equipment: cabin, motor brake, Four-sided planer Weinig Hydromat 23, 80m/min Working width: 230mm Working height: 160mm Number of spindles: 7 Spindle configuration: 1. Bottom: 15kW 2. Right: 11kW 3. Left: 11kW 4. Top: 15kW 5. Top: 7.5kW (hydro support) 6. Bottom: 11kW (hydro support) 7. Universal: 11kW (variable speed via frequency inverter) Planing dimension control from ATS panel Spindle speed: 6000 rpm Spindle diameter: 50mm 5 feed rollers in working table Feed speed adjustable via frequency inverter up to 80m/min Feed driven by cardan shaft Pneumatic hold-downs Technical documentation included Machine dimensions: 460x230x200cm (H) Weight: 6000kg Hfjdpfx Aasxww Hmjyjr