Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis machining center with traversing table, model MFS, equipped with an 840D Siemens control system. Travel ranges: 13200 x 3000 x 1200 Spindle: SK50, motor with a rated power of 15 kW. Maximum spindle speed: 2500 rpm. Gbedpey Rgt Eefx Al Djp

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Gbjdpfx Alotud Uto Dep Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 Gbodeudb N Djpfx Al Dop 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Control unit Basis HH 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Y-travel 600 mm Z-travel 600 mm Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Spindle holder 63 HSK- Total power requirement 50 kVA Gbedpfx Aleu Rfh Ts Djp Machine weight 12 to. Space requirement 9x2x2.7 m

Condition: excellent (used), Year of construction: 2011, Vertical milling head with quill Horizontal spindle Sturdy cast iron frame with flat guides in all axes (hardened) Ball screw spindles Automatic axis clamping Hydraulic tool clamping Automatic gear shifting Collision protection coupling, Z-axis Distance-coded linear scale measuring systems Mechanical handwheels Gbodpfx Aezlak Rsl Dsp Automatic central lubrication Chip collection tray Coolant system, free-standing, 70 liters Machine light Leveling elements Chip splash guard Control system: Heidenhain TNC 124 Travel ranges X / Y / Z: 400 / 350 / 400 mm Feed rate X / Y / Z: 0 - 2000 mm/min Rapid traverse X / Y / Z: 5,000 / 5,000 / 4,000 mm/min Table size W x D: 650 x 350 mm Spindle speed: 1 - 4000 rpm Tool holder: ISO 40 / DIN 69871 Weight: approx. 2050 kg Dimensions W x D x H: approx. 1916 x 1868 x 2220 mm Accessories: various tool holders

Condition: used, Infratirea Oradea FUS22 milling machine Robust universal milling machine, suitable for precise milling operations in steel, aluminum, and other metals. Specifications: Table: approx. 1,120 × 260 mm Gsdpfx Alszky A Rj Debp Longitudinal travel (X): 630 mm Transverse travel (Y): 220 mm Vertical travel (Z): 320 mm Horizontal and vertical spindle Spindle speeds: 31.5 – 1,600 rpm Main motor: 4 kW

Condition: like new (used), Year of construction: 1992, Retrofitted: 2023 Gbsdoyf Rtkepfx Al Djp Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis  X axis traverse: 4000 mmY axis traverse: 1200 mmZ axis traverse: 1250 mmVertical capacity (VC): 57 – 1307 mm Milling head Head type: Universal manual U22Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 2080)  /  Pull stud: DIN 69872Speed range: 20 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate: 5 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh ctronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2007, x-travel 350 mm y-travel 210 mm z-travel . mm digital readout ja table surface area 800x 240 mm turning speeds 115-1750 U/min Gbsdpfxezk Rcze Al Dep feed . m/min throat . mm spindle stroke . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm Gbsdpfx Aovwgm Hsl Djp y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW Gsdpfevwgmmsx Al Dsbp dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be Godpfx Ajvwglvel Dsbp beautiful condition and can be inspected by arrangement with the seller.

Condition: used, functionality: fully functional, Spindle mount: 40 or Morse 4 Maximum spindle torque: 9000 kgcm Table: Clamping surface: 1250 x 250 mm Max. table load: 3200 kg Number of T-slots: 3 pieces, 14 mm wide Slot spacing: 55 mm Travel: Longitudinal: 810 mm Transverse: 275 mm Vertical: 400 mm Automatic feeds: 14 – 900 mm/min Rapid traverse: up to 2800 mm/min Motors: Spindle motor: 4.2 kW Feed motor: 0.75 kW Other: Gbsdpfx Ajzi Hpbjl Djp Machine weight approx. 1800 kg Dimensions: length: 1900 width: 1700 height: 1700 mm Financial information VAT/margin: Margin: The displayed price includes VAT (VAT is not deductible for businesses).

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 Gjdezi Hihspfx Al Dsbp automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: used, Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck Gbodpfx Aot Trw Ssl Dop -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: AMF, universal clamping pad set in wooden box -Design/Dimensions: see photos -Quantity: 3x set available -Price: per set Godpfx Aju Npgqel Dobp -Dimensions box: 280/160/H40 mm -Total weight: 7.0 kg/piece

Condition: used, clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block Godpfx Aeu Aifysl Dsbp -Step block: clamping pad for clamping tool, 4 pieces -Clamping width: 50 mm -Bore: Ø 30 mm -Price/Delivery: complete -Dimensions: 100/60/H45 mm -Weight: 1.0 kg/piece

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm Gedpfx Aljuqf Nvj Debp -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm Gbodeuqf Tnjpfx Al Dop -Weight: 1.8 kg

Condition: used, Flat Pulley, Timing Pulley, Multi-Belt Pulley, Timing Pulley -Toothed pulley: Ø 256 mm -Type: D TB 56-14M-85 -Intake: Taperbush Tecnamic 3525-48 / Ø 48 x 65 mm -56 teeth: belt width 85 mm -Dimensions: Ø 256 x 103 mm Gbodpfxomxpuzo Al Dsp -Weight: 25 kg

Condition: good (used), Copy head, copying head, copying device, copying lathe -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm Gededzymaepfx Al Dobp -Weight: 143 kg

Year of construction: 2012, condition: used, Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support Gbodpekm Rn Sofx Al Dop -Manufacturer: Santenberg, clamping table: milling machine table from CNC machining center GTC S 2 -Linear guide: THK YNA419 -Shaft: Ø 20 x 45 mm -Dimensions: see photos -Total dimensions: 715/530/H285 mm -Weight: 222kg

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Bush, Timing belt pulley type 1615 40-8M-30-T -Type: P60-5M Gsdpsinwufofx Al Dsbp -Taper clamping bushing: optibelt 1615-25 -Hole: Ø 25 mm -Quantity: 19x toothed discs available -Price: per piece -Dimensions: Ø 106 x 38 mm -Weight: 1.8 kg/pc.

Condition: used, Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 190 mm Gsdpopul U Asfx Al Dsbp -Type: 40-14M-55 -Pitch: 14 mm / strap width approx. 55 mm -Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm -Dimensions: Ø 190 x 70 mm -Weight: 8.7 kg

Condition: good (used), Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table Gedet H Tqtopfx Al Dobp -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo -Dimensions total: 540/550/H70 mm -Weight: 30 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available Gedpfx Aob A H Rbol Djbp