Condition: used, Leak test device/pressure test device for ventilation ducts Manufacturer: Airflow UK Type: LM 1 Serial number: 125674 4 meters of hose 230 Volts Bodpfocxb Hasx Ap Dsww Documentation available

Condition: used, Digital overpressure measuring device Digibar Bwedpscf Rb Tsfx Ap Djw suitable for measuring static and quasi-static liquid and gas pressures. PE 100 is the battery-powered version.

Condition: used, Heraeus Type: HA 2472 BS Cleanroom workbench For installation and operation in laboratories Internal dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Condition: used Bjdpfozh D Rgjx Ap Djww Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Technical details: traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing ·Production quality control Bodpfxjzi R R Ao Ap Doww *

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Process control with temperature monitoring and additional connections For sale is a used industrial control unit from the manufacturer STANGE Elektronik GmbH, Type SE-604, installed in an additional housing with various operating and connection components. The SE-604 combines industrial process control, multitasking PLC with CoDeSys, program management and plant visualization in one system. The offered device also includes a PMA temperature controller, an operating hour counter, several industrial connectors, and other operating and connection options. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Device type: Industrial control / Process control Display: 6.5 inch TFT-LCD Resolution: 640 × 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Voltage supply SE-604: 24 V DC (18–36 V) Power consumption: typical 24 W Operating temperature: 0 to +50 °C Protection class SE-604: Front IP65 / Rear IP20 Dimensions SE-604 (W × H × D): 290 × 165 × 90 mm Weight SE-604: approx. 2.5 kg The specified dimensions and weight refer exclusively to the SE-604 control unit. The overall dimensions and total weight of the offered device with housing are unknown. Functions according to the manufacturer: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Configurable plant visualization Web server / remote control Configurable user and operating levels Interfaces of the SE-604 according to the manufacturer: Ethernet 10/100 2 × USB 2.0 RS232 RS422 CAN Profibus DP optional Modbus optional Additional features of the offered device: PMA KS 10-1 economy temperature controller Temperature monitoring test chamber Müller operating hour counter Button "Heat disc" Button "Light" Front USB port Multi-pole industrial connectors Additional colored connection sockets Housing with side carrying handles Connection and linking cables as shown in the pictures The exact configuration and function of the additional connections are unknown. The mentioned control functions describe the technical possibilities of the SE-604 according to the manufacturer. The actually installed software and configuration of the offered device have not been checked. Application areas: Industrial and process plants Heat treatment plants Multi-purpose chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Bwedpfx Aez Nvk Hjp Dow Test and experimental systems Spare part for compatible systems Scope of supply: 1 × STANGE SE-604 control system in housing 3 × Connection and linking cables as shown in the pictures 1 × Folder as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Operating hour counter available The table shown in the pictures or other items not explicitly mentioned are not part of the sale. Shipping or forwarding shipping possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, RMS Type: Test Manager SWR 900 RMS Electro-dynamic vibration system Test Manager SWR 900 Component carrier SWE 348 Load amplifier SWE 366 Bwsdjz Nf Rcspfx Ap Dew Load amplifier SWE 366 Power supply SWE 350 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. You can see these in the images below. If you have any questions, please do not hesitate to contact us. Bedpozy H U Sjfx Ap Dsww

Condition: used, FEUTRON Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Bjdpfx Apez Hl Dvj Doww Condition: Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature Shock Chamber / Shock Test Chamber Vötsch VT 7012 S2 Temperature Shock Chamber Two-chamber system for rapid temperature changes from -80 °C to +220 °C Water-cooled version with a mobile cart and programmable controller For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones using a mobile cart. The system has an observation window, test chamber lighting, and a programmable controller. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Device type: Temperature shock chamber / Shock test chamber Version: Two-chamber system / water-cooled Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe connection: Ø 67 mm Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread Bwjdpfxjz Ehrgj Ap Djw Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg Equipment: Two-chamber temperature shock system Hot chamber Cold chamber Motor-driven mobile cart Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe connection Ø 67 mm Water-cooled refrigeration system Signal light Control terminal Accessories as shown in the pictures Application areas: Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VT 7012 S2 Temperature Shock Chamber Control terminal Original operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer further questions by phone.

Condition: used, RMS Power amplifier / field unit / vibration testing system RMS TGE 10-5/12 + RMS FE3 System package offered exclusively as a source of spare parts / component supply For sale is a used RMS system package for vibration testing systems, consisting of a power amplifier, cooling unit and field unit. The components are sold exclusively as a set. Functionality has not been tested. Technical data, power amplifier: Manufacturer: RMS Regelungs- und Messtechnik Type: TGE 10-5/12 Serial No.: 16606 Year of manufacture: 2014 Input: 3 × 400 V / 50 Hz Power: 45 kVA Cooling unit: Type: SWG 761/9 Serial No.: 16608 Year of manufacture: 2014 Weight: approx. 250 kg Power stages: RMS power module TGE 10-400 Several power modules available in the amplifier cabinet Field unit: Manufacturer: RMS Regelungs- und Messtechnik Type: FE3 Serial No.: 10712 Year of manufacture: 1995 Current display: 0 – 300 A Weight: approx. 600 kg Dimensions and weight: Bedpfx Aez Ixu Dsp Doww Dimensions amplifier / cooling unit (W × D × H): approx. 1,800 × 800 × 2,000 mm Weight power amplifier: approx. 800 kg Weight cooling unit: approx. 250 kg Weight field unit FE3: approx. 600 kg Total weight: approx. 1,650 kg Equipment: RMS power amplifier TGE 10-5/12 RMS cooling unit SWG 761/9 RMS field unit FE3 RMS power module TGE 10-400 System control panel with touch display Power transformers / chokes Power, control and protection components Cooling system / cooling fan Analog ammeter 0 – 300 A Emergency stop, start button and main switch Connection and supply components as shown in the pictures Application areas: Spare parts sourcing Repair of existing RMS vibration testing systems Supply of spare parts and assemblies Conversion and repair projects Scope of delivery: 1 × RMS TGE 10-5/12 power amplifier 1 × RMS cooling unit SWG 761/9 1 × RMS FE3 field unit Available TGE 10-400 power modules System control panel Connection and supply components as shown in the pictures Condition: Used Optical condition as shown in the pictures Functionality not tested Sold exclusively as a source of spare parts / component supply. Not offered as a functional machine. No warranty for functionality, operational readiness or completeness. Shipping or freight transport possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Bodez Ndq Hspfx Ap Djww Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Year of construction: 2024, Theodolite DT-405, Video Measurement System VM-18, Angle Measurement Unit, Camera System used, from business liquidation Original purchase: 2024 Information and data according to the manufacturer: with active target panel Range up to 130m Video display of H and V angles versatile applications lockable H and V axes carrying handle collimating telescope zoom camera LED target panel motorized focusing unit Note: Operation only possible via monitor MF-03 Charging cable for Geo-222X target panels available Operating manual Transport case without carrying strap without adjustment tool without rain cover We recommend an inspection Information without guarantee Information, details, and technical data from the manufacturer To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are Monday to Friday from 8:30 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired after prior appointment. Bwedpfx Ape Ab R Upe Dsw Subject to prior sale, changes, errors and misprints.

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m Bodpo Ad Simjfx Ap Djww surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: new, Year of construction: 2025, functionality: fully functional, Extol - coordinate measuring machine from Aberlink Extol is the coordinate measuring machine from Aberlink, developed for precise measuring processes in industrial applications. The machine impresses with precise measurement results and a robust design, which makes it ideal for demanding manufacturing and quality control processes. Key features: High precision: extol delivers precise measurement results that support reliable quality assurance. Robust construction: Bodpfx Apevwa Sco Dsww Thanks to its robust construction, extol is ideal for long-term industrial use. Easy integration: The machine can be seamlessly integrated into existing production processes, thus optimizing your manufacturing processes. Rely on Extol from Aberlink - for precise, reliable and efficient measuring technology in your production.

Condition: used, Keyence XG-7501P Multi-Camera Image Processing System Controller XG7501P Manufacturer: Keyence Manufacturer Part Number: XG-7501P Bsdpjib Dncsfx Ap Djww Type: Multi-Camera Image Processing System, Controller Side cover included Country of Manufacture: Japan Item Condition: This item comes from the liquidation of a major German automotive parts supplier and was stored in a paternoster lift system. Therefore, some original packaging is missing, and some items show signs of storage. P.S. You can find more image processing modules – both new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), em: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F, Digital MAGFLO Flow meter Type MAG 6000 Transmitter with touch display. Secondhand size DN15 (1/2") Max. flow: 20m3/h Max. Press: 20 Bar/290 psi Max. Temperature: 130 c/166 f Bwodeirfbwopfx Ap Dsw Min. Temperature: -30 c/-22 f Year 2012 Input 60 V max 0.125 A For more informations please contact us! From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: used, Vötsch VCS 4100 climate testing chamber, -40 °C to +180 °C Manufacturer: Vötsch Type: VCS 4100 Temperature range: -40 °C to +180 °C Supply voltage: 400 V Rated current: 17 A Bodpfx Aouuiygjp Deww Rated power: 11 kW Refrigerant: R404A KK-07 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, overall weight: 8,000 kg, For sale on behalf of a customer is a ZEISS PRO T advance 16/15 3D coordinate measuring machine. The machine is currently fully operational and connected to the power supply. Technical data and features: - Year of manufacture: 2018 Bsdpfxjz Rmkyo Ap Djww - Operating hours: approx. 13,000 - Control system: ZEISS C99N - Measuring range: X 3,200 × Y 1,600 × Z 1,500 mm - Rotary-swivel joint: ZEISS RDS-C6 - 3D measuring head: RST-P - Ceramic probe ball, identification C02258-d - RDS probe changing magazine - 36-piece RST probe kit - Measuring software: ZEISS Caligo - PC workstation: HP Z440 G3 with Intel Xeon E5-1620 v4, 32 GB RAM and NVIDIA Quadro K2200 - Measuring table: solid special cast iron table, flatness according to DIN 876/II - Last DAkkS calibration: 02/26

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Bodpe Aa Nc Nsfx Ap Doww Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. We offer worldwide delivery on request!

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer the following machine for sale: Keyence WM-6025 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Bedpfez Sxr Sjx Ap Doww This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: good (used), Pressure transmitter, Endress+ Hauser – used: Price per unit, ex works: €95.00 (net)! Manufacturer: Endress+ Hauser Type: unknown / will be provided later Year of manufacture: unknown / will be provided later Available quantity: to be determined Condition: good Available: immediately Bodpfx Aez Sdxrsp Deww Location: Bünde, North Rhine-Westphalia

Condition: used, functionality: fully functional, For sale is a high-quality linear measuring system consisting of a Heidenhain MT101M measuring probe and an ND221 display unit. Ideal for precise measurements in mechanical engineering, manufacturing, or testing. Highlights: * High-precision measuring probe MT101M * Digital display unit ND221 – easy to read * Robust industrial quality from Heidenhain Bodpfx Ao Afbubop Doww * Perfect for length and comparative measurements * Ready for immediate use Condition: Used, but in very good condition. Fully functional. Normal signs of wear and tear (see pictures). Scope of delivery: * Heidenhain MT101M measuring probe * ND221 display unit * Connecting cable * Measuring table (choice between a large and a small measuring table)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, type plate available, KEYENCE VHX-7000 Digital Microscope – 4K Camera System with 20–200x Zoom For sale is a digital microscope system from KEYENCE, manufactured in 2023, in a high-quality design. The KEYENCE VHX-7000 system is suitable for demanding industrial applications in optical inspection, quality control, as well as surface and component analysis. The system features a swiveling 4K camera unit and a variable 20–200x zoom. Operation and image evaluation are performed via KEYENCE software. Technical data Manufacturer: KEYENCE Model / Designation: VHX 7000 S770E Software: KEYENCE System: Digital 4K camera system Camera: Swiveling Zoom: 20–200x Year of manufacture: 2023 Equipment and applications The system enables a detailed visual examination of workpieces, components, and surfaces. It is particularly suitable for use in industrial quality assurance, manufacturing, development, and failure analysis. The digital image display supports comfortable viewing and assessment of test objects. Thanks to the variable zoom and swiveling camera, the system can be flexibly adapted to different inspection tasks. Price and sale Selling price: €19,900 Lease takeover possible (lease ends 09/2027) Bwodpfj Af U H Aox Ap Dew If you are interested or have any questions, please do not hesitate to contact us. An inspection and demonstration of the system can be arranged by appointment.

Condition: used, functionality: not functional, Optical wave measuring device for measuring rotationally symmetrical workpieces (without power supply) Bodoz Atggopfx Ap Djww

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Bwsdpfoxbgrgox Ap Djw Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio