Used Sound Enclosure for sale (2,427)

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: API429763, overall weight: 490 kg, fuel type: electric, volume flow: 216 m³/h, pressure (max.): 13 bar, Atlas Copco GA18VSD screw compressor with variable speed drive for compressed air supply in workshops and industry. TECHNICAL DATA – AS PER NAMEPLATE Manufacturer: Atlas Copco Model: GA18VSD Year of manufacture: 2010 Motor power: 18.5 kW / 25 hp Maximum permissible operating pressure: 13 bar Volumetric flow rate Qv as per nameplate: 60 l/s / 3.6 m³/min Power connection: 400 V, 50 Hz, 3 phases Weight: 490 kg Serial number: API429763 EQUIPMENT AND CONDITION Frequency-controlled drive (VSD) and sound-dampening enclosure. Technical and visual condition according to available information: very good. Maintenance and service history available; last reported service: 24.01.2025. Current operating hours are not available. An integrated refrigeration dryer is not confirmed and is not offered as a guaranteed component. LOCATION AND INSPECTION 65618 Selters, Germany. Inspection and collection by arrangement. Coordinate the scope and procedure of loading before collection. Bsdpfxjz Hck Ho Aa Ieln Price: EUR 5,750 net, negotiable, plus statutory VAT. Reference: RQ449789FA

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, suction capacity: 30,000 m³/h, filter area: 152 m², actuation type: electric, total height: 3,500 mm, total length: 5,855 mm, total width: 1,920 mm, overall weight: 1,480 kg, Equipment: documentation/manual, The HOLZING RLA 1000 VIBER Power industrial stationary dust extraction unit is an advanced dust collection device designed for large production facilities and woodworking plants. Its design allows for outdoor installation, maximizing the use of space inside the production hall. Thanks to the integration of modern Viber Power technology, the unit continuously monitors operating parameters and automatically tracks the filter contamination level. The use of sound-absorbing enclosures for the fans effectively reduces noise generation, and the special blade geometry ensures maximum energy efficiency and stable vacuum pressure. Bsdpjzv Sx Ijfx Aa Ijln

Condition: good (used), Year of construction: 2015, functionality: fully functional, Screw Compressor GX5FF EP Main Technical Data (10 bar version): Motor Power: 5.5 kW (7.5 HP) Operating Pressure (max.): 10 bar (e) / 145 psi Free Air Delivery (FAD):* approx. 10.0 l/s to 10.1 l/s Sound Pressure Level: approx. 64-66 dB(A) (very quiet due to soundproof enclosure) Cooling System: Air-cooled Duty Cycle: 100% (suitable for continuous operation) Bjdpoy H D R Hsfx Aa Ieln Features & Dimensions (Full Feature - FF): Integrated Refrigerant Dryer: Yes (R134a) Tank Size: Mostly mounted on 200L or 500L tank (typical in 2015) Dimensions (approx.): 1430 mm x 665 mm x 1260 mm (tank-mounted) Weight: approx. 198 kg - 310 kg (depending on tank size) Connection: 1/2" G

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cooling capacity: 450 kW (611.83 HP), total width: 1,000 mm, total length: 3,870 mm, total height: 2,070 mm, Equipment: type plate available, Trane chiller, Suitable for refrigerant R404A. With sound-insulated enclosure. Bjdpfx Aasyzwpre Ijln A total of 2 units available, price stated per machine. Enclosure dimensions: Length: 4330 mm Width: 1570 mm Height: 2570 mm Available by arrangement in September 2026.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) Blodpfszi S R Rjx Aa Ien • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st pass) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm ?? / ??? Working width (min/max) mm 236 / 1300 - Working length (min/max) mm 250 / 5600 Numerical Control / Software ICOS Open (prepared for ZIMBA) Adjustable feeding speed (m/min ) 10 - 70 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.34 (2 x Kw 12,5) adjustable by N.C., with Hydro-Format-tool-system Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1570 (with Nordson VersaPUR) Pressure zone (adjustable by N.C.) Edge coils supporting unit (No. 12 reels) with servo material infeed Servo material end-trimming knife to cut the reel material Bljdpoz Eka Tefx Aa Isn Rough Trimming (Milling) unit 08.0555 HS/LS1 (2 x Kw 1) Fine Trimming (Milling) unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 0,66) Spraying Unit (for sliding liquid) Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.0516 HS/LS1 Glue scraping unit 08.522 Buffing unit 08.617-2 (2 x Kw 0,18) - Spraying Unit (for sliding liquid) No. 1 Milling grooving unit 75.34 (Left-Hand) adjustable by N.C. (1 x Kw 8) Hydro-Format-tool-system No. 2 Milling grooving unit 75.34 (Right-Hand) adjustable by N.C. (2 x Kw 12.5) Hydro-tool-system

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 9443, total height: 3,160 mm, ram adjustment: 64 mm, total width: 1,300 mm, total length: 2,470 mm, conveyor belt width: 160 mm, pressing force: 50 t, control cabinet height: 1,100 mm, control cabinet length: 1,250 mm, control cabinet width: 400 mm, type of input current: AC, stroke adjustment: 1,651 mm, clearance between the columns: 250 mm, working width: 950 mm, input voltage: 380 V, overall weight: 8,600 kg, control voltage: 24 V, conveyor belt thickness: 4 mm, pressure: 5 bar, compressed air connection: 10 bar, input frequency: 50 Hz, punching force: 50 t, BRUDERER BSTA 50HL (500 kN, year of manufacture 1990, order no. 9443) HIGH-PERFORMANCE STAMPING PRESS 100-1000 SPM Technical data Press manufacturer: BRUDERER AG, Frasnacht, Switzerland Machine model: BSTA 50 HL Serial/order number: Order no. 9443 Year of manufacture: 1990 Total weight approx.: 8,700 kg Soundproof cabin: W 3,460 × L 2,331 × H 3,910 mm (optional extra) Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Support plate – width × depth: 940 × 650 mm Base plate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip feed width: 250 mm Feeder: BBV 195 - 85 Feed angle: 90 degrees Max. strip thickness: 4 mm, strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 380 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder): approx. 2,471 mm Press depth: approx. 1,302 mm Press height: approx. 3,165 mm Price including transport in Europe Blodpjzq Sdyefx Aa Ion Original technical documentation and circuit diagrams Optional: Sound-insulating safety cabin/enclosure

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FlatCom M30 DoppelFlat 75-35 was manufactured in 2016. It features a complete sound-insulated safety enclosure with sliding viewing doors and a swivel-mounted CNC control console. The machine is equipped with a top-mounted multi-port suction hood and integrated pneumatic pressure regulators. If you are looking to get high-quality milling capabilities, consider the ISEL FlatCom M30 DoppelFlat 75-35 gantry milling machine we have for sale. Contact us for further details. • Machine Type: CNC Gantry Milling (Double Flat / Twin Table Station) • Enclosure: Complete sound-insulated safety enclosure with sliding viewing doors • Control Unit: Swivel-mounted CNC control console with monitor, keyboard, touchpad, status indicator lights, and key switch • Operator Controls: Standalone two-hand safety control pedestal equipped with palm switches and emergency stop button • Extraction System: Top-mounted multi-port suction hoods with 4 flexible extraction hoses • Cooling & Climate Control: Cabinet-mounted enclosure air conditioning/cooling units Bedpezu Rtusfx Aa Ijln • Pneumatic System: Integrated pneumatic pressure regulators, air filtration assembly, manifold block, and coiled hose connection • Safety Equipment: Red/Green signal tower light mounted on the frame

Condition: used, This listing is for 1 of 3 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) Bledpfx Aoxhdx Dja Ion 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: excellent (used), Bitzer Bitzer Refrigeration Unit S6F-30.2Y-40P with RO System & Sound Insulation Enclosure – unused Description: A high-quality Bitzer refrigeration unit on base frame is offered for sale, consisting of compressor, water-cooled condenser, sound insulation enclosure, and a reverse osmosis (RO) system including humidification. The system was assembled but never commissioned. Ideal for industrial, laboratory, or special applications. Technical Specifications – Refrigeration Unit Blodpfx Aaezd Rtte Ion Manufacturer: Bitzer Compressor: S6F-30.2Y-40P Condenser: Bitzer K573H, water-cooled Refrigerant: R452A Electrical Data: Supply voltage: 400 V / 3 Ph / 50 Hz Max. operating current: 53 A Starting current (rotor locked): 135 A in star connection / 220 A direct-on-line (YY) Max. power input: 30.1 kW Motor power: 22 kW (30 HP) Displacement: High pressure (HP): 101.1 m³/h Medium pressure (MP): 50.5 m³/h Oil: Oil type: BSE32 Option: BSE55 (with R134a, tc > 70°C) Oil volume: 4.75 l Reverse Osmosis System Type: RO20 (Werner / WeteA) Permeate output: 10 l/h Feed water requirement: 40 l/h Operating pressure: 14 bar Dimensions: 500 × 600 × 295 mm (H × W × D) Sound Insulation Enclosure Height: 2200 mm Width: 2400 mm Depth: 1200 mm Dimensions & Weight (approx.) Complete unit incl. enclosure: (W × D × H) approx. 2400 × 1200 × 2200 mm Total weight: approx. 900–1,100 kg (compressor + condenser + base frame + enclosure + RO system) Condition: used Scope of delivery: (see photo) Refrigeration unit on base frame Bitzer compressor Water-cooled condenser Sound insulation enclosure Reverse osmosis system incl. humidification (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Bledpfx Aozwfxkja Isn Possible to offer tooling if needed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Blodjxzuiaepfx Aa Ien

Condition: new, Eurotec Innovation TV45 – Trough Vibrator / Vibratory Finishing Machine (Made in Germany) The TV45 trough vibrator by Eurotec Innovation is a powerful and versatile vibratory finishing machine for professional surface finishing applications. The machine stands out due to its robust construction, high efficiency, and universal range of applications. Machine type: Trough Vibrator TV45 Shown: TV45 incl. sound enclosure and WS25 for part separation Manufacturer: Eurotec Innovation GmbH Thanks to the U-shaped working bowl, even larger and longer workpieces can be processed efficiently – while maintaining a compact design. The vibration motor mounted directly beneath the working bowl ensures highly efficient energy transfer and consistent finishing results. 🔧 Technical Data: Gross volume: approx. 115 liters Internal dimensions of working bowl: Length: 850 mm Width: 380 mm Height: 395 mm Rated speed: 1500 rpm Power supply: 400V – 16A – 50 Hz Advantages: ✔ Compact and robust design ✔ High energy efficiency due to direct vibration drive ✔ Universally suitable for various workpieces ✔ Deflection edge to reduce part adhesion ✔ Low-maintenance vibration motor ✔ Optionally available with sound enclosure and separation systems 🏭 Applications: Deburring, smoothing, and polishing Descaling, derusting, and cleaning Edge rounding Surface finishing The TV45 is an economical and high-performance solution for companies looking for a flexible vibratory finishing system for a wide range of applications – from individual parts to small batch production. The machine shown in the images includes optional accessories. The listed price refers to the base machine (TV45). A suitable electrical control unit is required for operation. Additional variants and custom configurations are available upon request. From development to production, we provide all products from a single source – all “Made in Germany”. Bsdpfef Sqdtox Aa Ieln ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Blodpfez Dnt Iex Aa Ijn Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: new, Eurotec Innovation RT27 – Rotary Dryer / Drying System (Made in Germany) Machine type: Rotary Dryer Manufacturer: Eurotec Innovation GmbH Model: RT27 The RT27 rotary dryer by Eurotec Innovation is a powerful and efficient solution for drying workpieces after vibratory finishing. By using drying media (granulate) and direct heating, parts are dried quickly, gently, and without stains. The system not only enables drying, but also simultaneous post-polishing of the components – ensuring optimal surface quality in a single process step. 🔧 Technical Data: Gross volume: approx. 270 liters Effective volume: approx. 140 liters Drive power: approx. 1.6 kW Heating power: max. 4 kW Power supply: 400V – 16A – 50 Hz Advantages: ✔ Fast and cost-efficient part drying ✔ Spot-free surfaces after vibratory finishing ✔ Drying and polishing in one operation ✔ Integrated screening section for automatic part separation ✔ Switchable between batch and continuous operation ✔ Spiral-shaped rising bowl bottom for gentle processing ✔ Expandable with extraction systems, sound enclosure, and automation 🏭 Applications: Drying of parts directly after the vibratory finishing process Polishing and post-processing Reduction of stains and water marks Protection against flash rust through complete drying Processing of complex geometries The RT27 is the ideal complement to vibratory finishing systems and ensures an efficient, reliable, and reproducible drying process – perfect for industrial applications. Additional variants and custom configurations are available upon request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Bjdpfef Sqfbox Aa Ieln This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED Bledpez Eznuofx Aa Ion FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Blodpfxsup Difj Aa Ien Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: good (used), functionality: fully functional, Mill with extraction system, sound-attenuating enclosure Power: 4 kW Blodpjvzzx Esfx Aa Ion All functions tested and fully operational!

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: API629410, Technical characteristics: Core Specifications Attribute Value Motor Power: 55 kW (75 hp) Maximum Working Pressure: 7.5 bar Free Air Delivery (FAD): approx. 174.4 l/s (approx. 369 CFM) Cooling Type: Air-cooled Noise Level: approx. 67 dB(A) Bjdpoyam Nqsfx Aa Ioln Drive Type: Gear-driven Integrated Dryer: Yes (Full Feature “FF” version) Electrical Supply: 400V / 50Hz Regulation System: Full load / no load with Elektronikon® controller Dimensions (L×W×H): approx. 1656 × 1100 × 1968 mm Weight: approx. 1100 kg Design & Features: - Sound-attenuating enclosure: Steel canopy with flame-retardant insulation for quiet operation. - Elektronikon® Controller: 3.5” color display with programmable pressure bands, remote monitoring, and auto-restart capability. - Zero-loss condensate drain: Integrated into the dryer for efficient moisture removal without wasting compressed air. - Integrated moisture separator: Labyrinth-style, built into the aftercooler for enhanced air quality. - IP55-rated motor: Dust and water-resistant, suitable for industrial environments. Reliability & Maintenance: - Synthetic oil: Rated for 8,000-hour change intervals. - Spin-on oil filter: With integrated bypass valve for easy servicing. - ASME-approved air/oil separator: For long service life and minimal oil carryover. Machine status: WORKING

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Bsdpszxzchsfx Aa Isln Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Blsdpfx Aezil S Iea Ion Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of manufacture: 2022 Only 3 operating hours Includes wheel set Self-collection only Continuous output (active power): 5.4 kW at 230V / 8.0 kW at 400V Socket configuration: 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1 x 400 V, 16 A - Sound-insulated diesel engine (compliant with noise and emission regulations) - Ergonomically positioned connections at the front in a control panel with voltmeter and hour meter - Full enclosure provides spray and impact protection - Electronic voltage regulation (AVR) - Thermal-magnetic circuit breaker protects against overload and short circuit due to faulty consumers or cables Bjdpfeu D Abwox Aa Ijln - Safe personnel protection via insulation monitoring (device does not require grounding) - Low-oil shutdown - Long operating times thanks to large 24 L fuel tank - High convenience with electric start - Water-cooled engine - Quality 'Made in Europe'

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) Blsdsx D E Dyjpfx Aa Ijn • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Bjdpjzq Hiqsfx Aa Ieln Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust ...

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Bljdpfxeu Au I Te Aa Isn Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.