Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Cold and Heat Shock Testing Chamber – Temperature Shock Chamber, -80 °C to +220 °C – 125 Liters Vötsch VT³ 7012 S2 Industrial temperature shock testing chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock testing chamber, model VT³ 7012 S2. The unit is suitable for testing components, electronic parts, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of -80 to +70 °C. The testing chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock testing chamber / Temperature shock chamber Year of manufacture: 2016 Equipment number: 58566224220040 Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Operating hours according to control display: 4,800.5 h Weight: approx. 1,000 kg (estimate, not weighed) Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: -80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standing pressure: 14 bar(g) Equipment: Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measurement and control functions Scope of delivery: 1 × Vötsch VT³ 7012 S2 temperature shock testing chamber with integrated touchscreen control and existing equipment as shown in the picture. Other accessories not shown in the picture are not included in the offer. Bwedpj Agm Ucjfx Ap Dew Condition: Used Optically well-maintained condition with typical signs of wear. The unit can be switched on. Touchscreen control, temperature displays, and interior lighting are functioning. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to change, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance Meets Intelligence Future vehicle generations will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger volumes of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. Bwodpfezg Tzrex Ap Dew The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 lines (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FlexRay, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB and mobile network Operation via menu control Technical Data: GL5300 Configuration GL5350-8H-1R3L CAN Interfaces CAN 2.0 16 CAN FD 4 LIN Interfaces 5 RS-232 Interfaces 7 Analog Inputs 10 Bit 4 Operating Voltage +7 V … +50 V Power Consumption at 12 V: typ. 10.3 W Current Consumption at 12 V: in Sleep Mode < 2 mA in Half-Sleep Mode typ. 180 mA in Operation typ. 860 mA Operating Temperature Range -40 °C... +70 °C Housing: Material Side Profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Decorative Strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Bwedezh D Rmopfx Ap Dow Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, RMS RMS Control and Measurement Technology – Vibration testing system with accessories For sale is a high-quality set from RMS Control and Measurement Technology, as well as a fan from Rietschle, ideal for vibration testing, resonance tests, and material analysis. Included devices: RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration exciter, type SW 6011, No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting frame, type SWT 6211/1, No. 6074 – stable mounting for test objects Power amplifier, type TGE 10‑1/7 – for optimal control of the vibration exciter Rietschle SKG 410‑2.01 fan – high-performance vacuum/pressure blower Condition: used Bjdpfx Apjzikdce Doww Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Bwodpfx Ajzii Akjp Djw Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Werth Werth Messtechnik Scope-Check 650×750×500/MB/Z – 3D CNC Coordinate Measuring Machine For sale is a high-quality 3D CNC coordinate measuring machine from the renowned company Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This machine is impressive due to its precision, reliability, and versatility in industrial metrology. Features & Properties: CNC-controlled 3D coordinate measuring machine Bwedpfx Apjzii Dzj Dow Multi-sensor capable (optical and tactile measurements possible) Version with Moving-Bridge system (MB/Z) for high stability and flexibility High precision in measuring complex workpieces Robust design, intended for continuous industrial use Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The highly precise, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe tip changes and precise measurements with long probes. Key features: Strain gauge technology: Minimal deflections are registered with high accuracy – typical errors such as "lobing" are eliminated. High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. Fast changeover: Automatic probe tip changeover with SCR200 changeover magazine, no recalibration required. Robust: Service life of the probe tip modules over 10 million probing operations. Flexibility: Standard (SF) and low-force modules (LF) for sensitive materials. Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm. Technical specifications (excerpt): Connection: M8 connector, Interface PI200 Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) Probing force XY: 0.02 N, Z: 0.07 N Overload force XY: up to 0.4 N, Z: up to 4.9 N Weight (sensor + module): 22 g Probe tips: M2 Technical data: Manufacturer: Werth Messtechnik Model: Scope-Check 650×750×500/MB/Z Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm Supply voltage: 115–230 V AC Power consumption: max. 10 A Weight: 1360 kg Scope of delivery: Werth Scope-Check 650×750×500/MB/Z Renishaw TP200 probe system incl. probe tip modules Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Bwjdpfxszil T Ee Ap Dew Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Lindner Type: AGB Burst Testing Stand TMM4 Lindner Burst Testing Stand AGB Burst Testing Stand TMM4 Technical Data: AGB Burst Testing Stand TMM4 Bwodpfx Apozd Sive Dsw Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Temperature range, chamber: RT ... 180°C Temperature range, medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x Height 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required to put the burst testing stand into operation: Pump, cooling tower & fire alarm control panel – these are not included. Weight: approx. 705 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Bsdozachcspfx Ap Dsww Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, Haida Type: HD-B604-S Bwodpfx Apezgr Eio Dew Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine The coordinate measuring machine for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 controller Condition: used Scope of delivery: (See image) (Changes and errors in technical data and information are subject to change!) Bwjdozd N Shjpfx Ap Dow We would be happy to answer any further questions you may have over the phone.

Condition: used, LDS Type: SPA56/40K v3 V875 TC LDS shaker with power amplifier and control unit Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN (peak) Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max acceleration SINUS 1078 m/s2 (peak) Max acceleration RANDOM 735.5 m/s2 (rms) Max velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types horizontal, vertical, arbitrarily pivoted Excitation types: Tests with sinusoidal excitation Tests with noise-based excitation Tests with sinusoidal and noise-based excitation Tests with shock-based excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Bjdpfozd Umdox Ap Dsww Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Bedpfx Apszd Uh Is Dsww Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in easy-to-use laboratory weathering equipment. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Bwedozg Tmhepfx Ap Djw Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000's humidification system uses a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron solid particle filter. Ensure that a separate oil-water separator is installed and do not rely on the air regulator filter, as it is designed only as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5" Width x 29" Depth x 72" Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5" Width x 80" Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and information!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) Bsdezimgtjpfx Ap Djww We will gladly answer any further questions you may have by phone.

Condition: used, Hexagon Type: Hexagon Optiv Performance 442 Product description: The 3D multi-sensor coordinate measuring machine Optiv Performance 442 combines optical and tactile measurements in a single system. The system supports multi-sensor measurements with a vision sensor, tactile sensor, TTL laser (Through-The-Lens), and the innovative Chromatic White Light Sensor (cws). The base unit with a vision sensor can be expanded with all available sensors in a modular fashion. Application areas: • Suitable for use on level floors • Versatile geometric measurements and GD&T analyses with standard construction accuracy • Design principle: » Low-vibration granite construction with a fixed bridge and a movable table » Integrated substructure with optional vibration dampers • Guides: » Precise mechanical linear guides in all axes • Drives: » DC servomotors, power transmission via backlash-free recirculating ball screws in the center of gravity • Length measuring system: » Incremental length measuring system • Resolution: 0.1 pm Hexagon Optiv 442 multi-sensor measuring machine equipped with a camera, laser, and Renishaw probe system. • Measuring range per sensor: 410x410x200mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. load capacity: glass plate 30kg Bwodpfx Apszgr R Es Dow • Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) • Max. travel speed per axis: 200mm/s • Camera with 2-stage zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5% Power consumption 1000 VA Weight: approx. 1100 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Bwedszii Dhspfx Ap Dew Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, DEWETRON High-End Power Analyzer DEWETRON DEWE3-PA8-RM / DEWE3-RM8 4-Phase Power Analyzer with TRION3-1810M-PA Up to 10 MS/s – modularly expandable 19" measuring system For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design with a built-in TRION3-1810M-PA power module and the connection and measuring accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM Chassis type plate: DEWE3-RM8 Revision: 1.1 Design: stationary rack-mount power analyzer TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measuring channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measuring range of the power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Power supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to the type plate: 500 W Made in Austria Sensor power supply: Integrated redundant sensor power supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Features: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current/measuring channels I1–I4 CNT1 / CNT2 TRIG DC AUX Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Integrated redundant sensor power supply Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Condition: Used Device can be switched on Optical condition according to pictures Dimensions 442 × 435 × 222 mm Weight: 15.8 kg Scope of delivery: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x installed TRION3-1810M-PA power module Measuring, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures The table or other items shown in the photos are not included in the sale unless explicitly mentioned. Bedpfxozyl Sie Ap Doww Shipping via UPS freight service is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, FARO Gage Plus F4 Measuring Arm / 3D Coordinate Measuring Arm FARO Gage Plus F4 Mobile measuring arm with CAM2 SmartInspect Pro and extensive accessories. For sale is a used FARO Gage Plus F4 measuring arm with CAM2 SmartInspect Pro software and extensive accessories. The mobile measuring arm is suitable for industrial measuring and testing tasks as well as for the acquisition and control of component geometries. Technical data: Manufacturer: FARO Model: Gage Plus F4 Device type: Mobile 3D coordinate measuring arm / measuring arm Revision: 23.5 Accuracy specification: 5 + 8L/1000 µm Country of manufacture: Switzerland Certification date: 12.06.2019 Software: FARO CAM2 SmartInspect Pro Software key as shown in the pictures USB stick as shown in the pictures Equipment: FARO Gage Plus F4 measuring arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the pictures Measuring and probing accessories as shown in the pictures Tool and accessory case FARO protective cover Documentation / documents as shown in the pictures Bwjdpfx Ajzxy Sbsp Djw Additional accessories as shown in the pictures Areas of application: Industrial metrology Quality assurance Component testing Geometry testing Production control Workshop and measuring room Scope of delivery: 1 × FARO Gage Plus F4 measuring arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the pictures Tool and accessory case Measuring and probing accessories as shown in the pictures FARO protective cover Documentation / documents as shown in the pictures Accessories as shown in the pictures Overall dimensions of measuring arm: not clearly defined as L × W × H Arm segment dimensions: 398 / 213 mm Measuring range: 1.5 m Weight of measuring arm: approx. 8.1 kg Transport case: Dimensions: approx. 1,145 × 409 × 330 mm Shipping weight: approx. 26 kg Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Bedpszrtylefx Ap Dsww Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for multi-layer thickness measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, developed for the precise and non-contact measurement of multi-layer materials such as plastic films, composite materials, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industry. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate thickness measurement of individual layers Measurement method: A-scan / optical interference analysis Channel: 1 (CH1) Application areas: In-line measurement in production lines or laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (See image) Sensor multi-Thick-MS1-CH1 Connection cable (Changes and errors in the technical data and information are subject to change!) Bodpfx Apsziiw Uo Djww We would be happy to answer any further questions you may have by phone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Bwjdpfozix Nmjx Ap Djw Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick Type: Z30 Technical data: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + testXpert II V3.5 software Bwsdpfjzil Ucex Ap Dsw Total weight approx. 500 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servohydraulic testing machine – fully functional Description: For sale is a servohydraulic testing machine, Sincotec Power Flow, from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering or research field. Technical highlights: Max. testing force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. swivel angle: ±50° Servohydraulic control Control via Sincotec TestPilot / CoPilot software Includes large hydraulic power unit Dimensions & testing machine Testing table: approx. 1.20 × 1.00 × 1.20 m (H) Overall height of testing machine: approx. 3.30 m Bedpfx Apozimb De Deww Hydraulic power unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional before disassembly Power supply / electrical (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (three-phase) Crossbeam: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Mitutoyo Type: QV-L404Z1L-D Bodpfjzii Dujx Ap Deww Item description: For sale is a CNC image processing measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurement in manufacturing, quality assurance, and research. Technical data: Manufacturer / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) version: 13.301.0075 Optics: Zoom lens, LED illumination system Work table: Glass platen with high precision Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel chair for comfortable working Scope of delivery: Mitutoyo Quick Vision Active 404 measuring machine Control PC with QVPAK 2 × TFT monitor (22") Keyboard, mouse Control panel Swivel chair Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.