Condition: good (used), Thyssen measuring plate / control plate made of natural hard stone length: 3000 mm width: 1500 mm thickness: 300 mm Flatness tolerance according to DIN 876/0 Target value 16 µm Actual value 13.3 µm Ident. no.: 14286 2 x T-slot Redpfoihfm Hox Aa Uop with base frame 6 x Wenzel Precision roll-off stands Concentricity tester with height adjustment heavy duty version With T-nuts High accuracy due to backlash-free roller bearings Roller block can be adjusted in height for diameter compensation. RRP pair 1890,-€ Financing through our bank is also possible. komplett-konzept.leasingo.de More measuring plates in other sizes- new and used - find

Condition: good (used), Thyssen measuring plate / control plate made of natural hard stone Thyssen measuring plate made of hard stone (granite plate) length: 2750 mm width: 700 mm thickness: 200 mm Total height with table: 1200 mm Height vertical plate: 240 mm thickness: 200 mm Redsihpclopfx Aa Ujp 2 x T-slot Flatness tolerance according to DIN 876/0 Base frame with cabinet Trimos HGL 2000 length measuring device without measured value display Financing through our bank is also possible. komplett-konzept.leasingo.de More measuring plates in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 JFA unwinding trestles Financing through our bank is also possible. Rodpfx Aajihille Ujp komplett-konzept.leasingo.de Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Bosch starter service life test The machine is a Bosch in-house production. It is used to check the service life or durability of starters (also starter motors) of engines. Manufacturer: Bosch Type: Machine for testing the service life of starters Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Rodpjg Ith Rofx Aa Usp Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Rjdpfeg Sxmfjx Aa Ujp Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 7,000 mm, measuring range Y-axis: 3,150 mm, measuring range Z-axis: 2,400 mm, Coordinate measuring machine in double-arm design Rodpfx Aoyla Iwja Usp TECHNICAL DETAILS X-axis measuring range: 7,000 mm Y-axis measuring range: 1,600 mm YT-axis measuring range: 3,150 mm Z-axis measuring range: 2,400 mm Probe head licenses License: PC-DMIS, NodeLocked PC-DMIS Option – World Axis PC-DMIS – CAD++ (DCC CMM) PC-DMIS Option – Tool Changer PC-DMIS Option – Wrist PC-DMIS Option – Require Hasp PC-DMIS Interface – Leitz (B&S) Measuring conditions Temperature range: 16 – 26 °C Max. temperature gradient (over time): 1.5 °C/h Temperature gradient (over 24h): 5 °C/24 h Temperature gradient (spatially): 1 °C/m Measuring accuracy MPEe for single arm: 20 + 13 L / 1,000 ≤ 55 µm MPEe for double arm (Yt = 3,150): 30 + 15 L / 1,000 ≤ 80 µm MPEp: 20 µm Measuring technology Probe head: CW43L (continuous) Probe: TP6 Stylus length: 40 mm Resolution: 1 µm Dynamics 3D positioning speed: 52 m/min 3D acceleration: 2.0 m/s²

Condition: ready for operation (used), Year of construction: 2023, A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Redpfx Aoympc Hea Uep

Condition: good (used), Flowmeter Endress+Hauser, Promag 33H More diverse Types at offer! Rodpehcpwzsfx Aa Ujp

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Redpfx Ajvvxvdsa Ujp Consists of 1 measuring case 50-100mm

Condition: used, optical angel measuring unit. Redsgw Tw Ropfx Aa Ujp

Condition: ready for operation (used), Binder KB-115 Cooling Incubator Heating Oven External dimensions: L 83.5 cm x W 68 cm x H 85 cm Internal dimensions: L 60 cm x W 40 cm x H 46 cm Temperature range: -10°C to 100°C Rated voltage: 230V You are welcome to arrange a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Redpfx Aaeynhp Us Uep Subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: R06-02-16-31492, total width: 500 mm, total length: 1,200 mm, total height: 320 mm, overall weight: 20 kg, FARO PRIME measuring arm - Year of certification: 2018 - Reach: approx. 500 mm - Incl. original FARO transport case Rjdpfeyizq Usx Aa Usp FCA D-73235 Weilheim Teck – loaded onto truck

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: Rsdpfsyc R R Dox Aa Uop "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Year of construction: 2019, condition: ready for operation (used), An automatic optical inspection machine Göpel for inline quality control of electronic printed circuit boards is available. Inspection types: 2D/3D/360°/AOI, viewing angle: 45°, 3D camera module: ViewZ, resolution X/Y: 21µm/10.5µm, component clearance below/above the assembly: 50mm/40mm, max. inspection speed: 100cm²/s, max. inspection dimensions X/Y: 570mm/510mm, max. printed circuit board weight: 5kg, min. printed circuit board width: 80mm, machine dimensions X/Y/Z: approx. 1200mm/1450mm/1650mm, weight: approx. 950kg. Including licences. Documentation available. An on-site inspection is possible. Rsdpfx Aeymfccsa Ujp

Year of construction: 2014, condition: ready for operation (used), Two automatic optical inspection machines Koh Young for inline quality control of electronic printed circuit boards are available. Resolution: 15µm, height accuracy: +/-0%, max. 3D measurement height: 5mm, inspection speed: 18.3cm²/s, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 510mm/580mm, PCB thickness range: 0.4mm-5mm, component clearance below the assembly: 50mm. Machine dimensions X/Y/Z: approx. 1000mm/1270mm/1650mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Rodpfx Asymfcioa Ujp

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 065014, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Measuring range X/Y/Z: 800 / 1000 / 700 mm Max. length measurement deviation: MPEe = 2.7 + L/300 µm Probe head: PH10M, Renishaw TP200 Rjdpfox Au Hnox Aa Uop Accessories: HT400 control unit, reference sphere, 18-piece set of styli/extensions, rack for stylus change Software: Quartis R2025-2, including additional modules Quartis Surf and Curve for measuring surfaces and curves, without PC Last maintenance: 12/2021, acceptance report available in documents Very good condition, fully functional, documentation available Inspection at the facility is possible Sale without warranty, including transport packaging and loading, available from March 2026

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Redpfjr Igwnox Aa Uep Type: MICROSPEED 10 Year 2007 Measuring machine control cabinet with remote control.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Rsdpfxoxw N Uvo Aa Uop Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution Rsdpfx Ajycvd Nsa Ujp - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg Rjdoycvdispfx Aa Ujp For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Measuring range Z-axis: 500 mm Repeatability: 0.01 mm Rodpjyfz Ulefx Aa Usp MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Condition: like new (used), Mitutoyo Linear Scale AT 600 Rsdpoym Aiyofx Aa Usp New in original packaging

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications Rsdpfx Aoydfvksa Uop • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: excellent (used), Professional Mitutoyo surface roughness tester designed for precise measurements in quality control, measurement laboratories, and in manufacturing environments. This is an industrial metrology-grade device, widely used in the automotive sector, CNC machining, toolrooms, and metalworking facilities. The 178-562-11D model enables fast and repeatable measurement of roughness parameters in compliance with current standards. Robust construction, intuitive operation, and high measurement accuracy are features for which the Mitutoyo brand is known. Rjdpfxsyc Rwds Aa Uep Technical condition: used, fully functional Visual condition: very good (as shown in the photos) Power supply: rechargeable battery Manufacturer: Mitutoyo (Japan) Included: • Mitutoyo 178-562-11D surface roughness tester • Transport case • Full set exactly as shown in the pictures

Condition: excellent (used), Professional Fluke DS703 FC diagnostic videoscope for visual inspection of hard-to-reach areas, maintenance, service, and energy sector applications. The FC (Fluke Connect) version enables wireless transmission of images and data. Key features: • Large, clear high-resolution LCD screen • Adjustable LED probe lighting – provides clear images in dark spaces • Fluke Connect (FC) – save, share, and archive inspection results • Intuitive operation, robust industrial-grade housing • Image/video recording functions (for inspection and reporting purposes) Set (as shown in the photos): • Fluke DS703 FC main unit Rjdoyc Ru Aepfx Aa Ujp • Inspection probe • Original Fluke case / carrying case • Cables / accessories as visible in the photos • Manuals / software media (if shown) Condition: • Very good (complete, well-maintained equipment) • Fully functional and ready for operation • Offered exactly as configured in the photos Applications: • Maintenance (mechanical, electrical, energy sector) • Manufacturing industry, automotive • Inspection of machinery, installations, ducts, enclosures • Technical service and diagnostics