Used Other measuring & testing equipment for sale (192)

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). Cseagxa2Ma The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Make: AMETEC / ATLAS, Type: Xenotest 440, Ser. No. 1804020, 2 x 2,200 W air-cooled xenon lamps, 2,310 cm² exposure area, irradiance (300 - 400 nm), rotating sample carousel, touchscreen with color display Cuhxmxf2Tg +++ Attention: Device is part of an online auction! +++

Condition: excellent (used), Digital height measuring device TESA MICRO HITE PLUS M 600 Dqnzwb Measuring range max. 600 mm, programmable digital display

Condition: excellent (used), Branson Ultrasonics SF24182/S Ultrasonic bath Ultrasonic Bath Gxqk70 Branson Series 8500

Year of construction: 2018, Condition: good (used), Used Keyence IM-7030 digital measuring projector including control computer and documentation. The measuring device is ready for immediate use and immediately available. Inspection under power is possible at any time on site. Cvmhiz0Wjc

Year of construction: 2020, Condition: like new (used), With autom. feed + discharge Workpieces are fed in as bulk material, inspected, bad parts are sorted out and good parts are transferred to containers as bulk material. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Hsma07903 Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - line scan camera (4K), surface inspection parts bunker SKAKO, 71 l volume up to 125 kg storage New price: € 230.000,-.

Condition: defective spare-parts repository (used), Oxford Instruments Here we offer you an X-ray fluorescence analysis. Can analyse thickness and/or composition of coatings Rfxye3E Up to 15 elements simultaneously Dimensions: W 1450 mm x D 1450 mm x H 900 mm Weight: approx. 185 kg Type: X-Strata 960 Condition: Only to be used as spare part dispenser Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: good (used), Keyence XG-X2500 image processing controller, image processing controller XG-X Jyhlfu Manufacturer: KeyenceProduct number: XG-X2500Type: Image processing controller, compatible with 5 megapixel camerasCountry of manufacture: Japan Item condition: This item comes from an operational liquidation of one of the largest auto parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some items have storage marks.

Condition: excellent (used), Functionality: fully functional, Beier GmbH Cable extension for EC screw technology, L=8m, 961249 080, 18 48 MPRO Model: 961249080 Type: 1848MPRO Dqnzyr Condition: Used

Condition: like new (used), Here we offer you a 3D profilometer. Technical data: Measurable XY range 300 mm × 150 mm *2 Object table XY stroke 278 mm × 134 mm (motorized) Z stroke 69 mm (motorized) Load capacity 4.5 kg Faik3Uviz Working distance 75 mm Image capture device 4-megapixel CMOS, B/W Macro mode: Magnification (in relation to a 15-inch monitor) 12× Horizontal 24.0 mm Vertical 18.0 mm Magnification (in relation to a 15-inch monitor) 25× Horizontal 12.0 mm Vertical 9.0 mm Magnification (in relation to a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (in relation to a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro mode: Magnification (in relation to a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (in relation to a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (in relation to a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (in relation to a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Display resolution 0.1 μm Height measuring range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeat accuracy (σ) Without image composition in Z 0.4 μm *1 With image composition in Z 1.0 μm *1 Measurement accuracy Without image composition in Z ±2.5 μm *1 With image composition in Z ±4.0 μm *1 Type: VR-6200 + VR-6000 Only 20 operating hours! Sale from location!!! Condition: (as good as new) For further technical information, please contact the manufacturer. Scope of delivery: (As shown) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Functionality: fully functional, INGUN Prüfmittelbau GmbH High-current contact pin, (1PE=60pcs.), HSS 118 0488, HSS 118 306 200 A 3002 Model: HSS1180488 Type: HSS118306200A3002 Condition: New C3S0Vcic Technical Data: HSS-118 20A

Condition: excellent (used), Here we offer you a microscope. Everything from a single source from KEYENCE: microscope, control unit, graphics system, cameras, objectives, tripods, accessories, software. Full HD resolution, KEYENCE REMAX graphics system, LED light source High depth of field The high depth of field is one of the basic characteristics or functions functions, which has a decisive influence on the user user-friendliness. The depth of field as well as the brightness and brightness are significantly influenced by KEYENCE's own developments, such as lenses, camera and graphics system. Free Angle Viewing The field of view does not change even when the specimen is viewed the specimen is viewed from a different angle. The specimen does not even have to be not even be touched. Due to the design of the system, it is possible to see details in the live image during the details that were not visible before. Reliable 2D and 3D measurements Based on different information such as color, contrast and height, measurements can be made at any position in the Bfyvneax measurements at any position in the image any position in the image. Measurements can be made in the live image or in stored documents. Intuitive software Viewing settings such as magnification and illumination method are saved with the image. saved with the image. This allows images to be reproduced with previously used with previously used settings and export necessary information with image material directly into analysis reports. From the lenses to the camera to the graphics system and object stage s [...]

Condition: new, Functionality: fully functional, OPTO Engineering Bi-telecentric lens for 2/3″ detectors, TC23072 Model: TC23072 Condition: New Technical data: TC Gomens General information: Most important optical specifications Magnification (x): 0.122 Image circle diameter (mm): 11.0 Maximum sensor size: 2/3″ Image area of the object (mm × mm): 69.67 x 58.11 Extended optical specifications Working distance (mm): 226.8 Effective aperture: 8 Typical telecentricity (max) (deg): < 0.04 (0.08) Typical distortion (max) (%): < 0.03 (0.07) Depth of field (mm): 27.80 Resolution (μm): 42 Mechanical specifications Mount: C Phase adjustment: Yes Length (mm): 299.2 Front diameter (mm): 116 Weight (g): 1480

Condition: excellent (used), Here we offer a BYK Gardner temp-gard 8p. Brief description: System for measuring and storing furnace temperatures. temp-gard 8p The temp-gard system records and stores the object and air temperature during the curing process. Documentation and analysis of the temperature curve is made easy with the temp-chart software: Everything you need to control and optimize your baking process. Bxpgyvv8D3 temp-gard 8p system Memory card for storing temperature data: unlimited data storage, fast data download, easy file management Long-life batteries - 250,000 readings or 300 hours of continuous operation Built-in display shows automatic function test and allows direct programming of operating parameters Robust stainless steel thermal barrier with absolutely safe temperature insulation 8 thermocouples for every application High accuracy guarantees long-term reliable results Temperature-stable results under all circumstances Put us to the ultimate test: temp-gard delivers the same result even after more than 1 hour in the oven - no drifting!!! Comes complete with: temp-gard instrument temp-chart software 1 set of heat sinks 1 memory card (PCMCIA) 1 sensor for air temperature, magnet 7 sensors for object temperature, magnet 1 interface cable to PC Certificate included Technical specifications temp-gard 8p accuracy ± 0.5 °C Resolution 0.1°C at 280°C Number of channels 8 Memory 500 KB on memory

Condition: used, Micro Epsilon laser triangulation sensor and controller - system with interface RS232, ILD1800 10 (100), optoNCDT 1800 Model Sensor:  ILD180010(100), Model Controller:  optoNCDT1800 Articel number:  4120021.100 Ffhlyiz8 The unit consists of one sensor and one controller – they all are harmonized/calibrated. Option 100: - focus of SMR Measuring range: 10mm Start of measuring range: 30mm Midrange: 35mm End of measuring range: 40mm Measuring rate: 5 kHz Permissable ambient light: 10.000lx Light source: 1mW, 670nm Laser safety class:  class 2 Analog Output:  ± 5V Digital Output: RS232 Power supply:  24 VDC (±15 %), max. 500 mA

Year of construction: 2016, Condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Ozk7T Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, Micro Epsilon laser triangulation sensor and controller - system, ILD2210 20, optoNCDT 2200 Model Sensor:  ILD221020 Model Controller:  optoNCDT2200 The unit consists of one sensor and one controller – they all are harmonized/calibrated.   Coqyvyed Measuring range: 20mm Start of measuring range: 90mm Midrange: 100mm End of measuring range: 110mm Measuring rate: 10 kHz Permissable ambient light: 30.000lx Light source: 1mW, 670nm (red) Laser safety class:  class 2 Analog Output:  ± 5V (-10V ... +10V) Digital Output:  RS 422 / 687,5kBaud Power supply:  24 VDC (±15 %), max. 500 mA Controller funktions:  Auto Zero / signal averaging

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent data logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components and and systems for autonomous driving. These complex, B7O7G7Yjps networked technologies provide ever larger amounts of data, which makes and more complex during the development phase. In order to shorten the test drives, reduce their number and still meet the test requirements of all departments, the advantages of an intelligent and powerful data logger data logger such as the GL5300 series come into play. The GL5300 series covers the time-synchronous recording of LIN/ CAN & CAN FD bus systems via FlexRay networks through to Ether- networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 for a further 20 CAN FD channels with SIC transceiver and up to 3 GL5450 for synchronous recording of up to 60 100-base T1 (30 taps) and up to 18 1000-base T1 routes (9 taps). Residual bus simulation Classifier Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FLexray, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive triger and filter conditions) Data transmission via LAN/WLAN, USB and mobile radio Operation via menu control Technical data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 Bit 4 Operating voltage +7 V ... +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in half-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C... +70 °C Housing: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Trim strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, SPIRENT Test Configuration Unit SR 5058 SN UCU290B3 Model: SR5058 S/N:  UCU290B3 C3Pzznyz

Condition: excellent (used), Perkin Elmer Type: Optima 7300 DV + S10 spectrometer The Optima 7300 DV represents the ultimate ICP-OES instrument in terms of optimizing performance and productivity. Can determine more than 73 elements in seconds Technical data: Wavelength range ultraviolet from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Duel View (DV) allows axial or radial viewing of the plasma The PerkinElmer S10 autosampler is a computerized multi-purpose sampling system for AA, ICP-OES and ICP-MS. The autosampler automates the introduction of standards and samples for instrument calibration and sample analysis B8V00Uydpi and extends the functions of the spectrometer to those of a fully automated analytical workstation. Furthermore, a PolyScience WhisperCool cooling unit is also included Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, machine/vehicle number: SN: 020702, Feinmess Dresden GmbH, Display Handling System, DHS 1 GModel:  DHS1G Dnjwlf

Condition: excellent (used), Keyence Here we offer you a 3D profilometer. Technical data: Magnification (referred to a 15-inch monitor) 12× to 160×. Viewing and measuring range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measuring resolution 0.1 μm : Height measurement: Height measuring range Without image composition in Z : 10 mm 1 mm With image composition in Z : 50 mm 30 mm Repeatability (σ)*1 Without image composition in Z : 0.4 µm B9Kmrbt78E With image composition in Z : 1.0 µm Width measurement: Measurement accuracy*1 Without image composition in Z : ±2.5 μm With image composition in Z : ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY stroke 184x88mm Z stroke 73mm Incl. control unit VR-5000 Type: VR-5200 + VR-5000 +PC and software Sale ex location!! Condition: hardly used Scope of delivery: (As shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), EA automatic electrical system Type: EA-EL 9400-150 T/19" 6HE / 0...7200W EA Elektro-Automatik electronic load Highlights & details: 7200 W 400 V/DC 150 A Overtemperature protection (OT) Pulse operation with adjustable pulse/pause ratio Adjustable rise/fall time Operating modes: constant current (CC), fixed voltage (CV), constant power (CP), constant resistance (CR) Remote sensor input, trigger input Battery test mode with time and capacity counter Description: Brk2Cseeeho Dynamic testing at last! No more testing batteries and power supply units via resistance loads. With the electronic load you can now test dynamically. Constant U, I, P, R, sawtooth, trapezoidal and square-wave signals, adjustable edges and pulse-pause ratios, extremely fast control values (50 µs 10 - 90 %), battery test mode, analog and optional digital interface plug-in cards (RS232/CAN/LAN/USB) make this load the ideal test device in the laboratory, test field and burn-in applications. Electronic load 0...400V / 0...150A EA-EL 9400-150 T/19" 6HE / 0...7200W Technical details: Product type : DC Electronic loads Housing : 19''-rack Voltage (U) : 400.00 Current (I) : 150.00 Power (P) : 720 Equipment : Rack version Condition : gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Gzkvrc Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Oioujqj Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.